Drill Bits

The CYL-3 Drill Bit provides lasting performance when drilling concrete. Its stamina is a result of a highly durable carbide blend specially developed and manufactured by Bosch. The blend is adapted to meet the demands of repeated use and offers high wear resistance when working with concrete. Moreover, the effective 2-flute U-shape design of the bit provides good dust removal, reducing friction, heat development and wear, resulting in an extended lifetime. The bit delivers lasting performance when drilling holes for fixings in abrasive materials such as concrete and natural stone. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing …

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. Sizes 10mm and above feature cutting spurs.1 x Bahco 9629-38 Flat Bit 38mmAdditional Information:• Diameter: 38mm• Overall Length: 160mm• Pack Qty.: 1

The HSS Twist Drill Bit Titanium offers maximum lifetime while drilling holes in metal. When using the appropriate cooling system, the drill bit has the lowest possible level of friction and minimal wear, due to its titanium-nitride coating. The high surface quality of this ground twist drill bit, which is made from HSS (high-speed steel), allows for extended usage. It is suitable for use on alloyed and non-alloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. The HSS Twist Drill Bit Titanium is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect …

The Milwaukee Hammer Drill Bits have been designed with a 2 cutter carbide tip to allow for drilling into concrete, brick, block and soft material for electrical installations, lighting fixtures and holders. Our Hammer Drill Bits also features a red flute for easy identification along with a wide flute design to remove dust faster, while also reducing heat build-up, resulting in more holes per charge. Specifications • Cutting Width: 10mm • Length: 260mm • Pack Quantity: 1Features & Benefits• Tungsten carbide tipped drill bit allow drilling into concrete, aerated concrete blocks, masonry and granite • Wide red flute for optimal material extraction and easy identifiable …

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Specifications: • Shank Diameter: 1/4 hex • Dia Metric: 16 • Overall Length Metric: 152

Osborn Goldex 81504 series jobber drill bits.High Quaility HSS fully ground Titanium Coated Drill point for longer life. Suitable for drilling in steel, cast steel (alloyed and non alloyed), grey cast iron, graphite and malleable cast iron. Specifications • Standards: DIN 338 • Composition: High Speed Steel • Point Angle: 118° • Point Type & Helix Angle: N ~ 30° • Drill Body Tolerance: h8

Milwaukee MX4 SDS Plus drill bits have a symmetrical 4 cutter geometry (4 x 90°) and are ideal for making perfect round holes when fitting anchors. The high volume flutes ensure efficient removal of dust and debris while drilling, and a centering tip enables quick and accurate starting. Features & Benefits • Symmetrical 4 cutter geometry • High volume flutes ensure efficient removal of dust and debris • Centering tip for easy spot drilling with pinpoint accuracy • Welded solid carbide tips on sizes 5mm - 10mm • Increased carbide results in higher durability • Four breaker points pulverize material for faster drilling • Enhanced rebar guards for improved …

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Masonry Drill Bit 16x150mm~ Forged steel with tungsten carbide tip~ Optimised design for fast and accurate drilling of concrete, stone & brick~ Diameter: 16 mm~ Total length: 150 mmTechnical Specification:CE Certified: NoConflict Materials Content : yesConflict material Country of Origin: GermanyConflict material Name of substance: TungstenREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger Included: NoMains Powered: NoHealth and Safety Text: Users and bystanders are advised to wear safety gogglesDimensions: Length: 16mm x Height: 16mm Weight: 0.1235KgWarranty: 12 months. C.K products are guaranteed for 1year against …

Faithfull Combination Wood Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be used in timber, plywood, MDF and blockwood and can be resharpened using a hand file.Size. 8 mm x 200 mmAdditional Information:• Diameter: 8mm• Overall Length: 200mm• Pack Qty.: 1

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The Raptor Short series Pilot Pins are compatible with Rotabroach RAPL broach cutters with a depth of 50mm and diameter of 13mm to 65mm.

Osborn Goldex 81504 series jobber drill bits.High Quaility HSS fully ground Titanium Coated Drill point for longer life. Suitable for drilling in steel, cast steel (alloyed and non alloyed), grey cast iron, graphite and malleable cast iron. Specifications • Standards: DIN 338 • Composition: High Speed Steel • Point Angle: 118° • Point Type & Helix Angle: N ~ 30° • Drill Body Tolerance: h8

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill …

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.Diameter 10mmLength 90mmAdditional Information:• Diameter: 10.0mm

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø18 x 300mmDimensions: Length: 20mm x Height: 377mmWeight: 0.265KgWarranty: Consumable

Milwaukee Hex Shank Flat Drill Bit for fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard. Ideal for door locks, morticing, electrical and plumbing work. 1/4? Hex shank reception for direct insertion into the power tool or for secure chuck grip. Ground centre point for accurate positioning and sharp wings for improved cutting performance. Specifications • Cutting Width: 38mm • Length: 160mm • Pack Quantity: 1Features & Benefits• Fast drilling of big diameters • Suitable for drilling in natural hard and softwood and chipboard • Ideal for door locks, morticing, electrical and plumbing work • 1/4? Hex shank reception …

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck. For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.The Faithfull FAISDS14260 SDS Drill has a heavy-duty tungsten …

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Milwaukee MX4 SDS Plus drill bits have a symmetrical 4 cutter geometry (4 x 90°) and are ideal for making perfect round holes when fitting anchors. The high volume flutes ensure efficient removal of dust and debris while drilling, and a centering tip enables quick and accurate starting. Features & Benefits • Symmetrical 4 cutter geometry • High volume flutes ensure efficient removal of dust and debris • Centering tip for easy spot drilling with pinpoint accuracy • Welded solid carbide tips on sizes 5mm - 10mm • Increased carbide results in higher durability • Four breaker points pulverize material for faster drilling • Enhanced rebar guards for improved …

This drill bit has a hexagonal shank system and works with all drill drivers with a 13-mm chuck. The Auger Bit is ideal for fast drilling-accuracy when producing through-holes, pre-drilling for rafter nails and drilling deep dowel holes in wood. The heavy-duty self-feeding tip pulls the bit through completely, which allows for quick and effortless precision-drilling. Straight holes and a high chip removal rate and increased speed are made possible by the bit's optimised low-friction flute geometry with a solid centre. Its optimised scoring spur and precision-ground main cutting edge produce accurate holes. It is ideal for use in the ancillary building trades, for carpenters and roofers, and …