Drill Bits

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 2.5mm • Total Length: …

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø16 x 100mmDimensions: Length: 5mm x Height: 175mmWeight: 0.076KgWarranty: Consumable

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size. 5.5 mm x 150 mm.Additional Information:• Diameter: 5.5mm• Overall Length: 150mm• Pack Qty.: 1

Expert Quality, a selection of metric-sized high speed straight shank twist drills specifically for drilling holes prior to tapping. Display packed one drill per card (sizes 4.2-10.2mm) and two drills per card (sizes 1.6-3.3mm).

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP150PRO Professional Jobber Drill Bits have the following specifications: Diameter: 1.5mm.Pack quantity: 3.Additional Information:• Tip Diameter: 1.5mm• Working Length: 16mm• Overall Length: 40mm• Pack Qty.: 3

The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.Diameter: 4.5mm.Working Length: 47mm.Overall Length: 80mm.Additional Information:• Tip Diameter: 4.5mm• Working Length: 47mm• Overall …

The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.Diameter: 5.0mm.Working Length: 52mm.Overall Length: 86mm.Additional Information:• Tip Diameter: 5.0mm• Working Length: 52mm• Overall …

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

The Milwaukee Hammer Drill Bits have been designed with a 2 cutter carbide tip to allow for drilling into concrete, brick, block and soft material for electrical installations, lighting fixtures and holders. Our Hammer Drill Bits also features a red flute for easy identification along with a wide flute design to remove dust faster, while also reducing heat build-up, resulting in more holes per charge. Specifications • Cutting Width: 4mm • Length: 90mm • Pack Quantity: 1Features & Benefits• Tungsten carbide tipped drill bit allow drilling into concrete, aerated concrete blocks, masonry and granite • Wide red flute for optimal material extraction and easy identifiable …

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

Octagonal shank chisel from selected steel with polished cutting edge. Sold loose.

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size. 5 mm x 150 mm.Additional Information:• Diameter: 5.0mm• Overall Length: 150mm• Pack Qty.: 1

A long-standing product range in the Dormer catalogue, A100 jobber length drill bits are suitable use in the majority of general-purpose engineering applications, whether used in machines or handheld power tools. Features & Benefits • High Speed Steel • Steam Tempered • DIN 338 • 118° Point Angle

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bit suitable for a variety of applications. Drills are fully hardened and ground.Technical Specification:Size: ø8 x 210mmWeight: 0.073KgWarranty: Consumable

This drill bit is compatible with a 1/4-inch hex-shank system for universal use with drill drivers, impact drivers and drill stands. The Impact Control HSS Twist Drill Bit offers highly robust drilling in metal, especially with impact drivers. Extremely strong body is extremely robust. The twist drill bit is precision-ground from solid metal and has an oxide-coated flute, giving it an excellent surface quality for slicing through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metals and plastics. Pack of 1 • Highly Robust with Impact Drivers • Impact Control HSS Twist Drill Bit …

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP300PRO Professional Jobber Drill Bits have the following specifications: Diameter: 3.0mm. Pack quantity: 2.Additional Information:• Tip Diameter: 3.0mm• Working Length: 30mm• Overall Length: 60mm• Pack Qty.: 2

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.10.50mm.Additional Information:• Tip Diameter: 10.5mm• Working Length: 83mm• Overall Length: 132mm• Pack Qty.: 1

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit