Car Pumps & Compressors

Pistol-grip tyre inflator fitted with a clip-on connector that's compatible with most vehicles including; cars, commercial vehicles, motorbikes and trailers. The easy to read 65mm analogue gauge is attached with a heavy-duty rubber cover for increased protection. Maximum inflation pressure 12 bar (170psi). Supplied with a 1/4" BSP male adaptor.

Compatible with most vehicles and suitable for fault finding common issues with; air conditioning, fuel, transmission, brake systems, turbo waste gates, valve stem oil seals, ignition and emissions. Dual reading pressure gauge 0 - 760mmHg/0 - 30inHg. Display packed.

Expert Quality, self-priming, manual fluid transfer pump. Designed to work with engine oils, coolants, transmission fluid, brake fluid, power steering fluid, diesel, water, antifreeze etc. (NOT petrol). Its simple and easy to use operation delivers 100ml per stroke. Manufactured with a removable neoprene rubber end cap and high quality brass cylinder body and plunger. Supplied with 1,000mm x 6mm (1/4") I.D. translucent plastic suction hose and 600mm x 12mm (1/2") discharge hose.

This 12V analogue tyre inflator is designed primarily for the rapid inflation of car, bicycle, motorcycle and small commercial vehicle tyres. It’s also supplied with a range of adaptors (three) to make it suitable for the inflation of balls, toys and other inflatable products. It features a built-in LED worklight and has a three metre power cord with 12V power plug and includes a spare fuse. Dial readings are in psi/bar, and the inflator has built-in compartments for the power cord, air hose and accessories.

• Die-cast body and dial type gauge with rubber protector.• Fitted with single clip-on connector.• Range: 0-12bar(0-175psi).Die-cast body and dial type gauge with rubber protector. Fitted with single clip-on connector.• Die-cast body and dial type gauge with rubber protector. • Fitted with single clip-on connector. • Range: 0-12bar(0-175psi). • Model No. SA332Technical Specification:Air Inlet Size: 1/4"BSPNett Weight: 0.38kgRange: 0-12bar(0-175psi)Dimensions: Length: 44mm x Height: 311mmWeight: 0.376KgWarranty: 1 year

• Emergency kit includes 12V compressor, 450ml sealant bottle, accessories for inflatables, instructions and zipped storage bag fitted with hook-and-loop fastening for smart storage.• Can seal a puncture up to ø6mm at the roadside in under 10 minutes.• Sealant is manufactured from natural rubber, meaning tyre can be washed out at the point of a professional repair.• Very simple-to-use kit requires no tools, no need to remove the valve core and is TPMS safe.• Plugs into a 12V vehicle accessory socket.• Replacement sealant bottle available - Sealey Model No. MAC10SR.• Suitable for cars, vans and 4x4s.• Maximum Pressure: 100psi.Emergency kit includes 12V compressor, 450ml sealant bottle, accessor…

Tyre Tread Depth GaugeMOT approved gauge complete with pocket clipMeasures 0 26mm in 1mm incrementsInc. 1.6mm depth measurement for MOT regulations

• Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 1/4"BSP(M) connector.Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 1/4"BSP(M) connector.• Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges. • Simple but effective thumb push-button quick release. • Suitable to replace the …

• Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 8mm(5/16") bore hose.Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 8mm(5/16") bore hose.• Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges. • Simple but effective thumb push-button quick release. • Suitable to replace the …

• Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 6mm(1/4") bore hose.Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 6mm(1/4") bore hose.• Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges. • Simple but effective thumb push-button quick release. • Suitable to replace the connecto…

• Steel framed foot pump with ø50 x 120mm steel barrel.• Dial type pressure gauge with rotating bezel.• Gauge calibrated in psi and bar and ranges from 0-100psi and 0-7bar.• Fitted with 610mm of flexible pressure hose with clip-on type connector.• Supplied with accessory for inflating items such as small inflatable boats, air beds and balls.Steel framed foot pump with ø50 x 120mm steel barrel. Dial type pressure gauge with rotating bezel. Gauge calibrated in psi and bar and ranges from 0-100psi and 0-7bar. Fitted with 610mm of flexible pressure hose with clip-on type connector. Supplied with accessory for inflating items such as small inflatable boats, air beds and balls.Technical …

Feature and Specification： Product name: Lydsto car inflatable treasure Product model: YM-CQB01 Executive standard: Q/YM J02005- -2021 Product size: 158*118* 50mm Working temperature: -10°C~ +60°C Note: It is Xiaomi Ecological Chain Products [There is no any Xiaomi LOGO on it] Thanks for your understanding!

The Bosch EASYINFLATE 18V-500 brings a new level of speed and convenience to inflating and deflating pool toys, inflatable boats, air mattresses, and other large-volume items. Compact and portable, it is battery powered so makes the perfect travelling companion for day trips and outdoor expeditions. As part of the PowerForAll 18v Alliance, it will run on any 18v PowerForAll battery and shares battery compatibility with a huge variety of cordless tools for the home and garden - from Bosch as well as other manufacturers. The compact pump comes with a 50cm hose and three nozzles for different-sized valves, along with a storage bag for convenient transportation. With 530 l/min of maximum airflow …

Air tools and accessories suitable for all leading makes of compressor. Includes high performance suction feed spray gun with composite bayonet type pot lid, tyre inflator with gauge, paraffin/detergent spray gun, air blow gun and coiled air hose. Components are fitted with 1/4"BSP threaded unions. Available individually, see below.

In-line tyre inflator fitted with a clip-on connector compatible for most vehicles including; cars, commercial vehicles, motorbikes and trailers and the easy to read 65mm digital gauge is attached with a heavy-duty rubber cover for increased protection. Maximum inflation pressure 20 BAR (300psi). Supplied with a 1/4" BSP male adaptor.

• Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 1/4"BSP(M) connector.• 90° Angled connector for the difficult to reach valves.Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 1/4"BSP(M) connector. 90° Angled connector for the difficult to reach valves.• Quick release coupling design with 360° swivel motion, for tyre infla…

• Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 8mm(5/16") bore hose.• 90° Angled connector for the difficult to reach valves.Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 8mm(5/16") bore hose. 90° Angled connector for the difficult to reach valves.• Quick release coupling design with 360° swivel motion, for tyre infla…

• Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 6mm(1/4") bore hose.• 90° Angled connector for the difficult to reach valves.Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 6mm(1/4") bore hose. 90° Angled connector for the difficult to reach valves.• Quick release coupling design with 360° swivel motion, for tyre infla…

Hand-held dual reading gauge with flexible 250mm long hose. Swivel angled tyre connection and air release valve. Large easy-to-read scale graduated 5 - 100psi in 1psi increments and 0.3 - 7bar in 0.1bar increments. Display packed.

3000W. 360 Degree Base.Power: 3000W Fast BoilVoltage: 220-240V~50HzTechnical Specification:Colour: White; Slver Power: 3000W

3000W. 360 Degree Base.Power: 3000W Fast BoilVoltage: 220-240V~50HzTechnical Specification:Colour: Black; Silver Power: 3000W

Light pump sack for inflating sleeping pads, effective, comfortable, very small pack size, can also be used as a waterproof pack sack, offset for climate neutrality.eco-friendly manufacturing.Lightweight pump sack with integrated pump function, so it can be used to inflate an air mattress or sleeping pad.Simply dock it onto the valve, shake the sack up and then roll it down from the top.You´ll be bedded on air.The valve fits most standard pads on the market.By using the pump pillow you also avoid moisture (from your breath) from collecting inside the pad.The pump sack needs near to no space and can also be used as a waterproof stuff sack for your sleeping bag or other gear.The VAUDE Green Shape l…

Coleman® powerful pumps help to inflate and deflate your airbed quickly and easily. Several adapters allow you to also use these high-volume pumps for beach toys and other inflatables.Features:- Two separate functions: Inflates and deflates airbeds very quickly. 230V AC and 12V DC chargers included.- Double LockTM valve and pinch valve adapters included.- Ergonomic Coleman pump design.Specifications:- Runtime 20 minutes- Airflow 679 litres per minute- Head pressure 39 mBar- Features Adapters, hose and carry bag included- Weight 1.33 kg- Power cord 180 cm

Features:- Easily inflate a lightweight airbed without introducing humidity- Dual function – Drybag and pump sack- Built-in valve to remove air after the drybag is closed- XL nozzle for high air flow- Lightweight- Fits Robens Peak valve- Extra large air capacitySpecifications:- Material: 100% polyester with PU coating and TPU coating- Dimesnions: 22 x 30 x 55 cm (LxWxH)- Volume: 25 L- Weight: 105 g