Drill Bits

For Fein, Bosch, Holz-Her, Metabo, and Lecurex hexagon drives
Torsion zone for absorption of peak loads
Extra hard

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.

Expert Quality, metric-sized high speed steel drills (with 5% cobalt). The addition of cobalt to HSS prevents wear for longer life. Display packed.

Increased relief angle from 12° to 17°
Shank Length: 157mm
Diameter: 6mm
Size: 18mm x 152mm

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The Stanley metal drill bits are high-quality, made from high-speed steel for general purpose drilling into metal. Engineered tip is ideal for drilling on contact, improved accuracy and drilling curved surfaces. The round shank is suitable for use with corded and cordless hammer drills. With its CNC-ground flutes, the Stanley HSS-CNC Metal Drill Bits ensure efficient chip evacuation, reducing heat buildup during drilling for enhanced performance and longevity. Features & Benefits • For use with corded and cordless hammer drills • For fast accurate drilling in soft steel, sheet steel and non-ferrous metals • Computer numerically controlled process for greater accuracy and quality …

The Faithfull Professional Long Series HSS Jobber Drill Bits have a longer length for deeper drilling requirements. Designed to meet the requirement of the professional user, these drills are manufactured from M2 grade steel and are fully ground to meet the requirements of DIN 338 and feature a 135 degree non slip split point. Their robust design gives less breakage, easier hole start and improved penetration. Suitable for use in: Alloy Steels, Carbon Steels, Cast Iron, Hardened Alloy Steels, Stainless Steels.The Faithfull FAIPP300LS Pre Pack HSS Jobber Drills Long Series 3.0mm have the following specifications:Diameter: 3.0mm. Overall Length: 100mm. Pack quantity: 2.Additional Information:• …

Advanced technology sets the STA53013 apart, ensuring precise and consistent results across a spectrum of tasks. Its ergonomic design ensures user comfort during prolonged use, providing a secure grip and precise control. Designed for efficiency and reliability, this Stanley accessory delivers top-notch results across diverse applications. Features & Benefits • For drilling into house bricks and masonry • For use in corded and cordless drills and impact drivers • Hex shank prevents bit slipping in standard drill chucks Specifications • Diameter: 5mm • Length: 101mm • Working Length: 50mm • Shank/Connection: Hex

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

The SDS plus-5 Drill Bit allows for effortless drilling. For smooth work, the carbide plate is grooved and bears notches that penetrate material more easily and prevent jamming in concrete. Drill guidance for easy starts without jarring or wandering is provided by the Activeteq centring tip, which keeps the drill in place for a precise hole diameter. Furthermore, AWB brazing and hardening technology reduces vibration during drilling to minimise strain on the user. The bit is intended for use on masonry and concrete. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill …

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, iron and most metals. Manufactured to meet DIN 338 standard.Size. 12.5 mm Dia.Additional Information:• Tip Diameter: 12.5mm• Working Length: 101mm• Overall Length: 151mm• Pack Qty.: 1

2 cutter SDS plus drill bits suitable for masonry and concrete. The bits have solid carbide tips, manufactured to DIN 8039, with centering points and optimised flutes, enabling fast drilling speeds.Features & Benefits• Good drilling speed at low cost • Ideal for concrete, masonry and fixing applications • 2 Cutter TCT tips manufactured to DIN8039Contents• 5.5mm (x 110mm length) • 7mm (x 110mm length) • 6mm (x 160mm length) • 7mm (x 160mm length) • 8mm (x 160mm length)

These Faithfull Professional Cobalt Jobber Drill Bits are manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance and cutting performance. All bits are fully ground and feature a 135° non-slip split point for precise centring and are produced in accordance to DIN 388 for high precision tolerances and geometric accuracy. Cobalt bits cut faster and last longer and are suitable for heavy-duty industrial work in: Alloy steels, carbon steels, cast iron, hardened alloy steels, stainless steels, high temperature alloys, Titanium alloy, high strength steel and carbon fibre composite materials.These Faithfull Professional Cobalt Jobber Drill Bits are supplied …

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60. Manufactured to BS 3066.

The HSS Brad Point Drill Bit offers precise drilling in soft and hard wood and can be used for through holes and pocket holes. This extremely sharp drill bit with a centring tip allows for exact positioning of the hole. Tear-free holes are produced by high-quality shoulder cutters with precise edges. For exact results, its two flutes prevent materials from clogging the hole and easily remove debris. This drill bit is suitable for use on soft and hard wood as well as for laminated boards and MDF. Made of HSS (high-speed steel), this Brad Point Drill Bit is ground from solid metal. Its hexagonal shank system allows for fast and tool-free drill bit changes. It has a hexagonal shank system and is …

Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.

The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP700PRO Professional Jobber Drill Bits have the following specifications: Diameter: 7.0mm. Pack quantity: 1.Additional Information:• Tip Diameter: 7.0mm• Working Length: 67mm• Overall Length: 107mm• Pack Qty.: 1

High carbon steel hardened and tempered. Shank diameter 6mm. For use with power drills. Display packed in plastic hang up wallets.

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

This drill bit is compatible with a 1/4-inch hex-shank system for universal use with drill drivers, impact drivers and drill stands. The Impact Control HSS Twist Drill Bit offers highly robust drilling in metal, especially with impact drivers. Extremely strong body is extremely robust. The twist drill bit is precision-ground from solid metal and has an oxide-coated flute, giving it an excellent surface quality for slicing through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metals and plastics. Pack of 1 • Highly Robust with Impact Drivers • Impact Control HSS Twist Drill Bit …

Milwaukee Hex Shank Flat Drill Bit for fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard. Ideal for door locks, morticing, electrical and plumbing work. 1/4? Hex shank reception for direct insertion into the power tool or for secure chuck grip. Ground centre point for accurate positioning and sharp wings for improved cutting performance. Specifications • Cutting Width: 26mm • Length: 160mm • Pack Quantity: 1Features & Benefits• Fast drilling of big diameters • Suitable for drilling in natural hard and softwood and chipboard • Ideal for door locks, morticing, electrical and plumbing work • 1/4? Hex shank reception …

The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.The Irwin Masonry Drill Bit for Cordless …

SDS Drill Bit 8x90x160mmC.K SDS Concrete Drill Bit 8x90x160mm~ Tungsten carbide tipped with optimized geometry for drilling concrete and stone~ Vacuum brazed tips for durability~ Ground flutes designed for optimum debris removal~ SDS-plus shank~ Diameter: 8 mm~ Working length: 90 mm~ Total length: 160 mmTechnical DataDiameter: 8mmWorking length: 90mmOverall length: 160mmComponent Material:Tungsten tipTechnical Specification:CE Certified: NoConflict Materials Content : YesConflict material Country of Origin: GermanyConflict material Name of substance: TungstenREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger Included: …