Car Subwoofers Incar DTA-0704  all car subwoofers →

V Cone with pressed paper membrane for maximum lightness High excursion foam surround combining high sensitivity and deep bass response Designed to be used in small sealed or reflex box ABS gasket provided for aesthetically pleasant installation Continuous 250 W power handling

Inserts slugly into Gen-2 P3S trim rings. Protects against surround and cone damage. Sized to fit Gen-2 P3S woofers

Features: Gold-plated contacts improve transmission quality. Enables you to receive standard non-amplified AM/FM, DAB digital radio signals. Low noise instrument design, work more stably & get higher sensitivity to improve signal concentration. Easy to assemble, no need to install additional roof antennas. Suitable for JVC- Kenwood- Alpine- Pioneer-. Specifications: Material: brass Size: approx 19x8x1.3cm/7.5x3x0.5-inch Note: Please allow 1-3cm error due to manual measurement. please make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Package includes: 1xCar Radio Antenna Adapter

10-Inch Cast Aluminum Subwoofer Grille Enhances the look of your 08 Series Kicker Solo-Baric subwoofers Protects the sub from damage This grill is sure to give your woofer an attractive look Compatible with: 11S10L74, 11S10L72, 08S10L74, 08S10L72, 08S10L54, and 08S10L52

Space-saving subwoofer solution Recommended power: 800 – 2500 watts. Voice coil 63 mm copper Long-stroke sandwich beading. Solid cast aluminium basket

Premium low-frequency sound suited for the marine environment Water-resistant connectors for simplified installation and superior protection Rigorously tested marinized design with IP65 rating (Dust-tight. protected against low-pressure jets of water) Designed to optimally work with Fusion stereo systems and amplifiers (sold separately) with custom DSP profiles International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Boxed Subwoofer / Nominal Load 300 Watt / Impedance 4 Ohm

Features THE ULTIMATE PARTY BOX SPEAKER ENCLOSURE: Say hello to the greatest 8 inch speaker box you'll ever . Say goodbye to unwelcome rattling disrupting your music's sound quality and the vibe- thanks to the -, resonant free recessed side panels sealed with our special aliphatic resin wood glue, our car audio speakers enclosure vastly improves the overall sound quality and of your system. PREMIUM QUALITY BUILD YOU CAN COUNT ON: Eachtruck speaker box is with high-grade MDF is 15mm thick for solid frequency response and music reproduction. You'll love the way the sounds in our 8 inch speaker enclosure. Unique Appearance Design: The plush grade charcoal carpeting of our car and truck speaker …

Protect your investment with the stylish and tough KTE-8G grille for 8" Alpine Type-R subwoofers. Brand: Alpine Model number: KTE-8G

Kicker 10 Inch 4 Ohm 500W Subwoofer for Marine Audio / Part # 45KM104 Compatible with: Marine Package Contains One Subwoofer The KICKER KM 10-inch Marine Subwoofer is made to work perfectly in a sealed or ported enclosure. You want the kind of bass that makes your friends want to be where the party is. KICKER Marine subs make it happen, with 10 and 12-inch drivers made for sealed or ported enclosures. Completely weather-resistant, these 10 and 12-inch marine subs are real-world tested for salt/fog and UV exposure, meeting or exceeding ASTM standards for marine durability.

Flat Subwoofer / Diameter 200 mm / Nominal Load 150 Watt

Suitable for speakers: no more than 2 inches high pitch , no more than 4 inches of mid-range The central hole is divided into two sections. Install a 4-inch midrange speaker, then remove the washer to install a 100mm diameter 4-inch midrange speaker. Install a 3-inch 3.5-inch midrange and use the washer on the pad. (If you install a 3.5-inch midrange speaker to install the aperture and speaker cover, you need to pay attention to the car a column is wider than 111mm). Tweeter Outer Diameter: 58mm Tweeter Internal Diameter: 47mm Mid-range External Diameter: 102mm Mid-range Internal Diameter: 85mm Maximum width of the bracket: 111mm Bracket length: 270mm color: White material: plastic Package Contents: …

High Quality Caraudio Enjoy the best music experience Excellent Sound Quality

Car Subwoofer Speaker / Diameter 300 mm / Mounting Depth 115 mm / 300 watt / Nominal Load 200 Watt / 94 dB / Impedance 8 Ohm

Flat Subwoofer / Nominal Load 130 Watt

Boxed Subwoofer / Diameter 203 mm / 8 Inch / 240 watt / Nominal Load 120 Watt

300 Watts RMS 1300 Watts Max PP Cone Rubber Surround Steel Basket

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Description: brand new and high quality Features: Made of high-quality material, durable, firm and stable for us to use. The radiator, also known as the passive speaker, is used to replace the inverter. It has low frequency diving depth, faster speed sense, and low wind noise. So it's a good choice for friends who like to dive deep, but have higher requirements for speed to make subwoofer with radiation basin. Three sizes optional. Easy and convenient to use. Attention: it is not a speaker, no magnet, it can make sound independently. Passive Radiator only, other accessories demo in the picture is not included Specifications: Item Type: Passive Radiator Material: Plastic=Metal Size: (Optional) …

Car Subwoofer Speaker / Diameter 178 mm / 7 Inch / 90 watt / Nominal Load 60 Watt / 88 dB / Impedance 2 x 4 Ohm

100 watts RMS 300 Watts Maximum Impedance 4 Ohm 16.5 cm SPL 90db 1 W 140 mm, 42 mm/1 m frequency response: 35 Hz – 21 kHz EÖ: Woofer Tweeter et: 47 mm, 14 mm woofer tweeter