Car Subwoofers Incar DTA-0704  all car subwoofers →

Car Subwoofer Speaker / Diameter 381 mm / 15 Inch / 1.800 watt / 88 dB

Membrane diameter: 165 mm Capacity: 180/90 Watt RMS/Max Impedance: 4ohm Mounting Depth: 63 mm

Current Overload, Short Circuits, Thermal Overload, DC Offset. Mono 1000 Car Audio Amplifier gives you a wonderful in-car entertainment. High , good sound quality, no distortion, give you a great hearing enjoyment. Light weight, handy and easy to install. . Wiring: 1. Speaker connection: amplifier board has a good piece of red and black wire welding can be accessed by a 4-8 Euro 100-150W or full-range speaker or speakers (red pick horn + , black pick speaker - is recommended to 4 ohm 8-12 inch 45 core 100-170 magnetic ) 2. connection A. Car has a CD player : GND then negative vehicle 12V 12V supply connected to the car 's positive REM CD player connected to the control line (so the CD player …

Gehäusesubwoofer

Car Subwoofer Speaker / Diameter 380 mm / 15 Inch / 3.000 watt / Nominal Load 1.000 Watt / 89 dB / Impedance 2 x 2 Ohm

Ground Zero Gzta bass emote bass level controls Gzia/Gzta/Gzha/Gzna ground Zero power amplifiers

Perfect for car audio, DJ and home audio.Suitable for most speakers / subwoofers.Adds extra protection to your woofers.Material: PlasticColor: blackSize: 25.4cmThe package includes:4 x speaker grilleOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Made for marine use: Life on the water can be hard on audio gear, with sun, spray, salt, and extreme temperatures, not to mention post-cruise washdowns and the occasional loose fish on the deck. This rugged JBL sub is ready for it all, with a one-piece polymer basket, marine-ready componentry, stainless steel mounting hardware, and a sealed, UV-resistant grille that will stand up to spray and sunlight for years to come. IPx5 Rated: Marine-grade materials & components to suit the demands of a harsh outdoor environment with an IPx5 marine rating Power handling: 200 watts RMS (600 watts peak power) / Sensitivity: 88 dB at 2.83 volts / Frequency response: 30-250 Hz / Impedance: 4 ohms Available …

Boxed Subwoofer / Diameter 270 mm / 11 Inch / 300 watt / Impedance 4 x 4 Ohm

Feature:1. The height of the inverted tube is 115mm and the opening is 100mm. It is suitable for speakers with 8-12 inch speakers. 2. The inner side is and the bell ends are designed at both ends. The airis very and the airis obviously improved. 3. Speaker inverting hole, also known as sound tube and air hole, often used in inverting type speakers.It is mainly to overpower the air sound of the speaker vibration in the box and overlap the sound pressure of the radiation in front of the speaker to produce a bass effect. 4. With anti - rat net to prevent rats from damaging the product, more considerate. . Made of high quality ABS plastic, this product is sturdy and . Specification:Item Type:

2) NEW ROCKFORD FOSGATE **R2D4-12** 12" 1000W 4-Ohm DVC Prime R2 Car Audio Subwoofer Power Handling (Max): 500 Watts per sub (1000 Watts per pair) Power Handling (RMS): 250 Watts per sub (500 Watts per pair) Features: 12-gauge compression terminals

Boss NEO12, 12" (30cm), Ripper Series, 300W RMS, 600W MAX, Impedancy: 4 ohms

Woofer / Mounting Depth 85 mm / 200 watt / Nominal Load 100 Watt / 83 dB / Impedance 8 Ohm

Protect your sound investment with these stylish grilles from Kicker. Works for Kicker CompR 12" Subwoofers Covers screws for a sleeker, cleaner install.

Inserts slugly into Gen-2 P3S trim rings. Protects against surround and cone damage. Sized to fit Gen-2 P3S woofers

Affordable big-bass performance - without taking up lots of room in your trunk or cargo area. Tough as nails. Load your cargo right on top of the sub for extra space – with plenty of bass! Full perimeter venting and UniPlate back plate and pole piece Stiff, injection-molded cone with 360-degree back bracing Utilizes extensive internal bracing, thick MDF construction and custom embroidery

Car Subwoofer Speaker / Diameter 254 mm / 10 Inch / Mounting Depth 89 mm / 600 watt / Nominal Load 300 Watt / 83 dB / Impedance 2 x 4 Ohm

12-inch subwoofer with 4-ohm voice coil 750 watts max power. 250 watts RMS power Polypropylene and mica cone with poly-foam surround Progressive Wavelet Ribs cone keeps distortion low Progressive polyester spider increases the accuracy of the subwoofer cone motion

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.