150 mm cutting discs

It is compatible with angle grinders. The Standard for Ceramic Diamond Cutting Disc provides reliable cuts in tiles. Its continuous cutting rim achieves accurate results in all sorts of tiles. Additionally, the disc's high-quality standards are ensured by the Bosch diamond competence centre in Switzerland. Use this disc for cutting ceramics, porcelain and fine stoneware. Pack of 1 • Reliable Cuts in Tiles • Standard for Ceramic Diamond Cutting Disc provides reliable cuts in tiles • Continuous cutting rim achieves accurate results in all types of tiles • High-quality standards ensured by Bosch diamond competence centre in Switzerland Specifications: Diameter mm: 150 Bore …

It features a 1/2 inch universal shank. The S 713 AW Clean for Fibre Insulation Reciprocating Saw Blade delivers clean curved and plunge cuts in special materials. Its sharp, serrated knife edge produces tear-free results, while the blade’s recessed body provides ultimate curved-cutting capabilities. Moreover, the serrated edge and a pointed tip make plunge cutting possible. Made from HCS (high carbon steel), the blade is appropriate for cutting fibre insulation materials. Its standard length of 150 mm enables a cutting capacity of up to 100 mm. The blade is ideal for use with cordless compact saws.S 713 AWHCS, blade with serrated edgeEspecially optimised for use in compact saws.Specially fo…

Lasts up to 50x longer than a Bi-Metal blade in tough materialThe sheer abrasiveness of cement fibre board means it is one of the toughest materials for your recip saw blade. For installers, plumbers, electricians and any tradesmen involved in maintenance and restoration, however, cutting these boards is essential.The Expert ‘Fiber Plaster’ is designed to cut fibre plaster boards effectively over a long lifetime. Its extreme durability comes courtesy of Bosch Carbide Technology, integrating the hardest metal into an advanced tooth design. The relatively short, pointed blade gives good control and access to tight spaces: it is designed with productivity in mind.The Bosch Expert ‘Fiber Plaster’ Reciproc…

Features:Powerful Cuts In A Wide Range Of Materials:- Multi Material Circular Saw Blade delivers powerful cuts in a wide range of materials- Base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy- Expansion slots lower vibration during use, which dampens noise and reduces heat development- HLTCG (High-Low Triple Chip Ground) teeth make the blade robust for working with abrasive materials- The HLTCG (High-Low Triple Chip Ground) teeth make the Multi Material Circular Saw Blade robust for working with abrasive materials.- It is compatible with hand-held saws.Specifications:- Outer diameter mm: 150- Bore size mm: 20- Bore with reduction ring mm: 16- Width of cut (…

Multimaterial Circular DiscSpecifications:- Suitable For Materials: Wood- Blade Diameter : 15 Cm- Thickness: 1.4 Mm- Bore Size: 2 Cm- Number Of Teeth: 36- Cutting Width: 2.4 Mm- Cutting Result: 3

The Best for Universal Turbo Diamond Cutting Disc provides fast cuts in universal building materials. Its optimised diamond matrix provides the fastest cuts through a variety of materials. The disc's matrix shape has been developed for universal cuts with a near-perfect finish for all visible cutting edges. Additionally, this product cuts quickly while producing very little vibration. Use this disc for cutting building materials such as concrete and masonry. • Fast Cuts in Universal Building Materials • Best for Universal Turbo Diamond Cutting Disc provides fast cuts in universal building materials • Optimised diamond matrix provides the fastest cuts • Matrix shape developed …

The Standard for Abrasive Diamond Cutting Disc provides reliable cuts in all sorts of abrasive materials. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality standards, which are ensured by the Bosch diamond competence centre in Switzerland. Use this disc for cutting all sorts of abrasive materials. • Reliable Cuts in All Sorts of Abrasive Materials • Standard for Abrasive Diamond Cutting Disc provides reliable cuts in all sorts of abrasive materials • Optimised diamond matrix delivers solid results • High-quality standards ensured by Bosch´s diamond competence centre in Switzerland Specifications: Diameter mm: 150 Bore diameter mm: 22.2…

Diamond Cutter / Concrete / Quantity 1 Piece / Disc Diameter 150 mm / Disc Thickness 2.4 mm / Bore 22.23 mm

The Standard for Universal Turbo Diamond Cutting Disc delivers reliable cuts in universal building materials. Its diamond matrix is engineered for cutting various construction components, resulting in well-formed cutting edges. These high-qualitity standards are ensured by the Bosch diamond competence centre in Switzerland. Use this disc when cutting building materials such as concrete and masonry. Pack of 1 • Reliable Cuts in Universal Building Materials • Standard for Universal Turbo Diamond Cutting Disc delivers reliable cuts in universal building materials • Diamond matrix is engineered for cutting various construction components and well-formed cutting edges Specifications: …

DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, aluminium and non-ferrous metals. Specifications • Diameter: 150 mm • Thickness: 1.3 mm • Bore Size: 22.23 mmFeatures & Benefits• Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in airborne …

The DEWALT FlexVolt XR Metal Reciprocating Blades are coated in a special Toughcoat finish which reduces the build up of heat thus improving cutting performance and speed up to twice as much as market competitors. They have been optimised to deliver the best cutting performance in metal rebar and similar metals. Designed to be used in conjunction with the FlexVolt 54 Volt Reciprocating Saw. The DEWALT DT99552 FlexVolt XR Metal Reciprocating Blades have the following specification Length 152mm. TPI 14/18. Pack Size 5.

Pack of five BIM reciprocating saw blades manufactured to a high quality with progressive tooth pitch. For fast straight cutting of ferrous and non-ferrous sheet metals and thin metals. Compatible with most reciprocating/sabre saw machines with a universal 1/2" connection. These blades are similar to Bosch S123XF blades.

Pack of five BIM reciprocating saw blades manufactured to a high quality. For flexible cutting of ferrous and non-ferrous sheet metals and thin metals. Compatible with most reciprocating/sabre saw machines with a universal 1/2" connection.

Pack of 5 BIM reciprocating saw blades manufactured to a high quality ensuring a robust sharp blade. For flexible cutting of ferrous and non-ferrous sheet metals. Compatible with most reciprocating/sabre saw machines with a universal 1/2” connection.

Pack of 5 BIM reciprocating saw blades manufactured to a high quality ensuring a robust sharp blade. For flexible cutting of ferrous and non-ferrous sheet metals. Compatible with most reciprocating/sabre saw machines with a universal 1/2” connection.

Pack of 5 BIM reciprocating saw blades manufactured to a high quality ensuring a robust sharp blade. For flexible cutting of ferrous and non-ferrous sheet metals of 3-10mm thickness. Compatible with most reciprocating/sabre saw machines with a universal 1/2” connection.

Expert Quality. Display packed five blades per pack.

Pack of five reciprocating saw blades made from high-carbon steel manufactured to a high standard. For fast curved plunge cutting of hardwood, softwood, plywood, plastic and laminate. Compatible with most reciprocating/sabre saw machines with a universal 1/2" connection.

These Faithfull Sabre Saw Blades BIM Demolition are high-quality blades manufactured for precision and stability. These bi-metal, flexible straight-cut blades are designed for making quick, coarse cuts and general demolition work. Manufactured for precision and stability when cutting. They can be used on wood, chipboard, wood with nails/metal, window frames and fibreglass/epoxy up to 100mm thick.Pack of 5 Faithfull S611DF Bi-Metal Sabre Saw Blade Demolition 150mm 6 TPIAdditional Information:• Application: Demolition• Length: 150mm• TPI: 6• Pack Qty.: 5

These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most …