Multi Tool Blades

V-Groove Bit. For sign word and lettering. Suitable for use on Veneered woods, fibreboard, chipboard, plywood, softwood, hardwood, rubber, plastic, plexiglass and carbon Technical Specifications Shank diameter: 3.2mm. Working diameter: 6.4mm. Working length: 2mm Accessory length: 37mm Usage: V-groove. Maximum speed: 35,000rpm. Essential attachment: Shaper /Router table Ref.231

Cut-Off Wheels, perfect for slicing and cutting in metal, wood and plastic. Features and Benefits Cut-off wheels make it easy to cut of slot bolts, screws, sheet metal, thin wood, and plastic Fibreglass reinforced cut-off wheels (426) and heavy duty wheels (420) are perfect for tough applications Notes Do not attempt to grind or sand Max. speed: 35,000rpm Shank diameter: 3.2mm Max. working depth: 24mm These wheels cut only along their edges Use Dremel cut-off wheels with mandrel 402

This Faithfull saw blade has a broad range of applications with its carbide grit edge. It will cut out damaged tile joint and cuts grooves in plaster, porous concrete and similar construction materials. Compatible with many multi-function oscillating power tools.Additional Information:• Tool Type: Tiling• Size (mm): 65• Blade Length (mm): 65

Cut-Off Wheels, perfect for slicing and cutting in metal, wood and plastic. Features and Benefits Cut-off wheels make it easy to cut of slot bolts, screws, sheet metal, thin wood, and plastic Fibreglass reinforced cut-off wheels (426) and heavy duty wheels (420) are perfect for tough applications Notes Do not attempt to grind or sand Max. speed: 35,000rpm Shank diameter: 3.2mm Max. working depth: 24mm These wheels cut only along their edges Use Dremel cut-off wheels with mandrel 402

A high-speed cutter designed for precision rotary engraving. USES: Ideal for detail engraving, carving and routing in wood, fibreglass, ceramics, plastic, jewellery and soft metals. TIPS: Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure. Do not use this bit with hardened materials. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed. Shank size 3.2mm Pack Qty 3

These versatile brushes are ideal for removing rust and corrosion, polish metal surfaces, deburr and blend surface junctures or clean electrical components. Features and Benefits Stainless steel brushes Does not cause "after rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel Shank diameter: 3.2mm Pack of 2

Piloted Corner Rounding Bit. Rounding over edges and corners. Suitable for use on Veneered woods, fibreboard, chipboard, plywood, softwood, hardwood, rubber, plastic, plexiglass and carbon Technical Specifications Shank diameter: 3.2mm. Working diameter: 4.8mm. Working length: 1.4mm Accessory length: 36mm Usage: straight. Maximum speed: 35,000rpm. Essential attachment: Shaper /Router table Ref.231

Quality cutters for detail engraving, carving, routing in wood, fiberglass, plastic and soft metals.SpecificationsShank diameter - 3.2 mmWorking diameter - 0.8 mmMaximum RPM: 35.000 1/minPack of 3

This Faithfull diamond boot blade will remove tough grout from between tiled surfaces. Its efficient shape allows aggressive grinding without damaging the tile. A long lasting blade which enables continuous work on large projects. Compatible with many multi-function oscillating power tools.Additional Information:• Tool Type: Tiling• Size (mm): 65• Blade Length (mm): 65

Piloted Corner Rounding Bit. Rounding over edges and corners. Suitable for use on Veneered woods, fibreboard, chipboard, plywood, softwood, hardwood, rubber, plastic, plexiglass and carbon Technical Specifications Shank diameter: 3.2mm. Working diameter: 6.4mm. Working length: 2mm Accessory length: 36mm Usage: straight. Maximum speed: 35,000rpm. Essential attachment: Shaper /Router table Ref.231

High speed cutters can be used for shaping, hollowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Shank diameter: 3.2mm Max. speed: 30000rpm

The DSM510 is a reinforced type 1 abrasive cutting wheel which is designed to cut a variety of materials such as metal and plastic.Specifications• Working diameter - 20.0mm Contents • Pack of 3

Crafted from High Carbon Steel (HCS), the scraper offers a perfect blend of hardness and durability. The rigid 52mm width allows for effective scraping, making it ideal for precision work and achieving smooth surfaces. Features & Benefits • For removing hard adhesives such as those used for carpet tiles • Tool free blade change system making blade change quick and easy • For use with Stanley Fatmax, Black and Decker Oscillating multi tools Specifications • Width: 52mm • Quantity: 1

These multipurpose spiral cutting bits from Dremel can be used with a power drill on wood, plastic, fiberglass, drywall, laminate & vinyl siding. Shank diameter 3.2mm. Working diameter 3.2mm. Working length 30mm. Accessory length 65mm. Maximum speed 35.000 rpm Recommended Attachments: Line & Circle Cutter (678). Multipurpose Cutting Kit (565).

These versatile brushes are ideal for removing rust and corrosion, polish metal surfaces, deburr and blend surface junctures or clean electrical components. Features and Benefits Stainless steel brushes Does not cause "after rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel Shank diameter: 3.2mm Pack of 2

Saw blade for longer cut offs, which are normally limited by the throat depth of the tool. In terms of technical specifications, this blade is identical to the MS51 General Purpose blade, however, its top and bottom parts are 90 degrees twisted. This twist allows a lateral material feed either from left or right, resulting in technically infinite cuts. Technical specifications: Length: 100mm Cutting depth: 12mm. Teeth per centimeter: 6 Blade width: 0.4mm. Blade depth:2.5mm.

High speed cutters can be used for shaping, hollowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Shank diameter: 3.2mm Max. speed: 30000rpm

High speed cutters can be used for shaping, hollowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Shank diameter: 3.2mm Max. speed: 30000rpm

This versatile Sirius blade set for oscillating multi tools contains a selection of blades for cutting common construction materials including wood, metal and plastic. Black oxide coating helps to ensure corrosion resistance, an etched metric scale on the blade to helps to guide the depth of cut, and a universal arbor design means they are compatible with a wide range of oscillating multi tools, including the models listed below. Suitable for: • Einhell: BT-MG220E,RTMG200E,TEMG200 • Fein: Multi Master • Bosch: GOP,POF (Not Starlock) • Draper: MT, COMT • Makita: TM3000C,DTM50,TM3010,DTM51,TM30 • Dewalt: DWE315 , DCS356 , DWE355 • Stanley Black and Decker: MT280 …

Precision saw blade for fine, clean and straight cuts in all sorts of wood. Perfect for laminate and wood flooring or thin wood plates. Use only with Dremel Mini Saw attachment 670. Made of carbon steel, 48 offset teeth guarantee precise, fast cuts up to 6.35 mm. Blade size: 31.8 x 0.6 x 9.2mm Working diameter:31.8mm. Maximum working depth: 6.4mm. Maximum speed: 35,000rpm Essential attachment: Mini Saw Attachment Ref. 670.

With a flexible 30mm width, this scraper adapts seamlessly to different surfaces, providing optimal contact for efficient and thorough scraping. The Fatmax Flexible Scraper is engineered for durability, ensuring it withstands the rigors of demanding projects, while the ergonomic design ensures comfortable use over extended periods. Ideal for working on intricate surfaces and achieving smooth results, this scraper is a must-have addition to your toolkit. Features & Benefits • For removing hard adhesives such as those used for carpet tiles • Tool free blade change system making blade change quick and easy • For use with Stanley Fatmax, Black and Decker Oscillating multi tools Specifications …

The heavy-duty Dremel Max 194DM Carving Bit is coated in Titanium Nitride to last 2 times longer than the standard, non-coated accessory. What can you do with it? The 3.2 mm high-speed cutter works well for detailed material removal in applications like shaping, carving, engraving, hollowing, precision cutting, grooving, slotting, inlaying, making tapered holes or freehand routing. The cylinder shape of the carving bit allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and V-cuts. The accessory tip makes flat bottom slots and grooves, flat side cuts, and makes V-cuts when held at 45-degrees. How to use: Let the accessory and your Dremel Multi-Tool do the work …

he Dremel wood drill bit set contains 4 drill bits with centering point for drilling into wood. The different drilling diameters included are 3, 4, 5 and 6 mm. The titanium coating offers high performance and longer lifetime. Shank diameter: 3.2mm. Maximum Speed: 35,000rpm.

Brass brushes are non-sparking and softer than steel.They will not scratch soft metals like gold, copper, brass.