Drill Bits

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Ideally equipped to handle virtually any task: Metal drill bit set for precise drilling in iron, steel, non-ferrous metals, grey cast iron and hard plastics. Universally suitable with low risk of breakage

It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed …

Set containing high-performance metal drill bits with high-grade titanium nitride coating, for a particularly long service life and fast drilling progress. Bit diameters in 0.5 mm steps from 1.5-6.5 mm. Drill bit tip with 135° and split point manufactured to DIN 1412C

Includes: Diameter metal mm - 3.0 , 4.0 , 5.0 , 6.0 , 8.0 Diameter stone mm - 3.0 , 4.0 , 5.0 , 6.0 , 8.0 Diameter wood mm - 3.0 , 4.0 , 5.0 , 6.0 , 8.0 Length mm - 30.0 , 40.0 , 45.0 , 50.0 , 65.0 , 33.0 , 43.0 , 52.0 , 57.0 , 75.0 , 30.0 , 40.0 , 50.0 , 60.0 , 80.0

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

The Flat Chisel provides standard chiselling for various demolition applications in concrete and brick. Good material removal on light application is made possible by the chisel´s flat cutting edge. The chisel is intended for mortising, demolition and adjustment work as well as for restoring joints and clearing reinforcements. Flat Chisel provides standard chiselling for various demolition applications in concrete and brick It is compatible with hex shank systems.Flat chisel provides standard chiselling for various demolition applications in concrete and brick• Standard Chiselling in Concrete and Brick for Various Demolition ApplicationsSpecifications:Total length mm: 400Chisel cutting e…

The Flat Chisel provides standard chiselling for various demolition applications in concrete and brick. Good material removal on light application is made possible by the chisel´s flat cutting edge. The chisel is intended for mortising, demolition and adjustment work as well as for restoring joints and clearing reinforcements. Flat Chisel provides standard chiselling for various demolition applications in concrete and brick It is compatible with hex shank systems.Flat chisel for various demolition applications in concrete and brick• Standard Chiselling in Concrete and Brick for Various Demolition ApplicationsSpecifications:Total length mm: 400Chisel cutting edge mm: 22Materials:ConcreteMaterials i…

It is compatible with hex shank systems. The Pointed Chisel delivers standard chiselling for various demolition applications in concrete and brick. Its pointed tip makes precise adjustment work possible. Moreover, the chisel is intended for mortising, demolition and adjustment work, as well as for restoring joints and clearing reinforcements.Pointed chisel delivers standard chiselling for various demolition applications in concrete and brick• Standard Chiselling in Concrete and Brick for Various Demolition Applications• Pointed Chisel delivers standard chiselling for various demolition applications in concrete and brick• Pointed tip makes precise adjustment work possibleSpecifications:Total …

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed …

Set containing high-performance metal drill bits with high-grade titanium nitride coating for a particularly long service life and fast drilling progress. Bit diameters in 0.5 mm steps from 1-10 mm. Drill bit tip with 135° and split point manufactured to DIN 1412C

It is compatible with TE-S systems. The Flat Chisel provides less jamming and more progress in concrete than standard flat chisels. The self-sharpening power ribs create not only lateral, but also vertical cracks in the material. This provides a higher material removal rate and prevents the chisel from getting stuck. The chisel is intended for use in concrete and brick for mortising, demolition and adjustment work, including restoring joints and clearing reinforcements.Self-sharpening flat chiselSDS hex flat chisel is ideal for various applications in concrete with less jamming and more progress• Less Jamming and More Progress in Concrete• SDS Hex Flat Chisel is ideal for various applications …

Metal drill bit set for precise drilling in iron, steel, non-ferrous metals, grey cast iron and hard plastics. Bit diameters in 0.5 mm steps from 1-13 mm. Universally suitable with low risk of breakage

Bosch Professional HSS-R DIN338 drill bit set in metal case. Ideal for drilling into metal, this set contains sizes 1.0mm through to 13mm.Features & Benefits• Bosch Professional HSS-R drill bits • 118° Point angle • DIN 338 • 25 sizes in 0.5mm increments • Ideal for drilling into metalContents• 1.0mm HSS-R Drill Bit • 1.5mm HSS-R Drill Bit • 2.0mm HSS-R Drill Bit • 2.5mm HSS-R Drill Bit • 3.0mm HSS-R Drill Bit • 3.5mm HSS-R Drill Bit • 4.0mm HSS-R Drill Bit • 4.5mm HSS-R Drill Bit • 5.0mm HSS-R Drill Bit • 5.5mm HSS-R Drill Bit • 6.0mm HSS-R Drill Bit • 6.5mm HSS-R Drill Bit • 7.0mm HSS-R Drill Bit …

The HSS Twist Drill Bit Titanium offers maximum lifetime while drilling holes in metal. When using the appropriate cooling system, the drill bit has the lowest possible level of friction and minimal wear, due to its titanium-nitride coating. The high surface quality of this ground twist drill bit, which is made from HSS (high-speed steel), allows for extended usage. It is suitable for use on alloyed and non-alloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. The HSS Twist Drill Bit Titanium is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect …

Bosch 2608577352 HSS PointTeQ Drill Set for Metal 1-13mm 25 Piece The Bosch 2608577352 HSS Drill set for Metal has 25 twist drill bits, fast drilling in metal due to PointTeQ tip design. The drill bits have self-centring tips which prevent wandering, making quick and easy drilling starts possible. Increased drilling rate generates less heat and wear keeping the tips sharper for longer and ensuring continuous durability. Features:
- Self-centring tip
- Sized from 1mm - 13mm
- PointTeQ tip design for fast drilling Specification:
- Sizes: 1 -1.5 - 2 - 2.5 - 3 - 3.5 - 4 - 4.5 - 5 - 5.5 - 6 - 6.5 - 7 - 7.5 - 8 - 8.5 - 9 - 9.5 - 10 - 10.5 - 11 - 11.5 - 12 - 12.5 - 13mm…

It is compatible with a 28 mm hex shank system for hammers. The Asphalt Cutter is ideal for the targeted breaking up of road surfaces. The chisel´s wide and straight blade is designed to slice through asphalt, making it also ideal for restoring asphalt coverings. Asphalt cutter is ideal for the targeted breaking up of road surfaces • Targeted Breaking Up of Road Surfaces • Asphalt Cutter is ideal for the targeted breaking up of road surfaces • Wide and straight blade is designed to slice through asphalt, also ideal for restoring asphalt coverings Specifications: Total length mm: 500 Chisel cutting edge mm: 125 Materials: Concrete Materials in Detail: Tarmac

Flat Chisel provides standard chiselling for various demolition applications in concrete and brick The Flat Chisel provides standard chiselling for various demolition applications in concrete and brick. Good material removal on light application is made possible by the chisel´s flat cutting edge. The chisel is intended for mortising, demolition and adjustment work as well as for restoring joints and clearing reinforcements. Flat chisel provides standard chiselling for various demolition applications in concrete and brick • Standard Chiselling in Concrete and Brick for Various Demolition Applications Specifications: Total length mm: 400 Chisel cutting edge mm: 35 Materials: Concrete …

Flat Chisel provides standard chiselling for various demolition applications in concrete and brick The Flat Chisel provides standard chiselling for various demolition applications in concrete and brick. Good material removal on light application is made possible by the chisel´s flat cutting edge. The chisel is intended for mortising, demolition and adjustment work as well as for restoring joints and clearing reinforcements. Flat chisel provides standard chiselling for various demolition applications in concrete and brick • Standard Chiselling in Concrete and Brick for Various Demolition Applications Specifications: Total length mm: 520 Chisel cutting edge mm: 35 Materials: Concrete …

It is compatible with a 28 mm hex shank system for hammers. The Spade Chisel offers standard chiselling for various demolition applications in concrete and brick. Featuring a wide cutting edge, the chisel offers a high rate of material removal in masonry and mortar, while it is also intended for adjustment work in asphalt, masonry and concrete.Spade chisel offers standard chiselling for various demolition applications in concrete and brick• Standard Chiselling in Concrete and Brick for Various Demolition Applications• Spade Chisel offers standard chiselling for various demolition applications in concrete and brick• Featuring a wide cutting edge, the chisel offers a high rate of …

It is compatible with a 28 mm hex shank system for hammers. The Pointed Chisel has a pointed tip for precise adjustment work in concrete. It is intended for use in concrete and brick for mortising, demolition and adjustment work, including restoring joints and clearing reinforcements. Pointed chisel has a pointed tip for precise adjustment work in concrete • Pointed Tip for Precise Adjustment Work in Concrete • Pointed Chisel has a pointed tip for precise adjustment work in concrete • Intended for use in concrete and brick for mortising, demolition and adjustment work Specifications: Total length mm: 520 Materials: Concrete Materials in Detail: Concrete

The Pointed Chisel delivers a constantly high material removal rate due to its self-sharpening feature. The special star shape at the working end retains the shape of the accessory to prevent work interruptions. The chisel is intended for use in concrete and brick for mortising and demolition work, including restoring joints and clearing reinforcements. The self-sharpening Pointed Chisel offers a 30% higher material removal rate compared to standard pointed chisels. It is compatible with a 28 mm hex shank system for hammers. Pointed chisel, self-sharpening Pointed chisel delivers a constantly high material removal rate • Constantly High Material Removal Rate and No Work Interruptions …

This Bosch 2 Piece Breaker Chisel Set is compatible with SDS Max shank systems. The SDS Max Pointed Chisel delivers standard chiselling for various demolition applications. Its pointed tip makes precise adjustment work in concrete possible. The chisel is intended for use in concrete and brick, including mortising, demolition and adjustment work, in addition to restoring joints and clearing reinforcements. The SDS Max Flat Chisel provides standard chiselling for various demolition applications in concrete and brick. Good material removal on light applications is made possible by the flat cutting edge. The chisel is intended for use in applications such as mortising, demolition and adjustment …