Drill Bits

Faithfull Plug Cutters are used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes. For best performance, the power drill should be held in a stand. For a perfect grain match use an offcut from the timber being plugged. To ensure an accurate fit we suggest you use the same screwsink from the Faithfull brand. The set of 4 contains sizes No 6, 8, 10 and 12.Cuts Size 13 mm PlugsAdditional Information:• Type: Plug Cutter• Screw Compatibility: 13mm

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60. Manufactured to BS 3066.

Drilling into reinforced concrete is no longer a hit and miss application, reinforcing bar being no obstacle for the nemesis drill. Also perfect for use in the hardest of natural stone. Its unique symmetrical head geometry ensures precision drill holes. Perfect for critical anchor fixings and where spot drilling is required. Features & Benefits:• Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement• The nemesis will drill up to 50% more holes than the normal rotary hammer drill bits.Specifications:Diameter (D) - 12 mmOverall Length - 160 mmShank - SDS-PLUS Working Length - 100 mmPack Quantity - 1

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Milwaukee MX4 SDS Plus drill bits have a symmetrical 4 cutter geometry (4 x 90°) and are ideal for making perfect round holes when fitting anchors. The high volume flutes ensure efficient removal of dust and debris while drilling, and a centering tip enables quick and accurate starting. Features & Benefits • Symmetrical 4 cutter geometry • High volume flutes ensure efficient removal of dust and debris • Centering tip for easy spot drilling with pinpoint accuracy • Welded solid carbide tips on sizes 5mm - 10mm • Increased carbide results in higher durability • Four breaker points pulverize material for faster drilling • Enhanced rebar guards for improved …

Faithfull Tri-Point Speed Auger Bits will drill fast and clean holes in all types of wood. The three spurs and cutting edges create perfectly round holes with less chance of binding in the workpiece. Three flutes offer efficient waste removal making them much faster than traditional bits. A self-feeding screw tip enables accurate centring and pulls the bit through the wood. Precision machined from high quality carbon steel with ground and honed cutting edges. The quick release 1/4in hex shank is impact rated for use in impact drivers as well as all other corded and cordless drills. These stubby drill bits are 102mm (4in) long making them ideal for drilling through joists or in enclosed areas.…

These Faithfull SDS Plus Chisel Bits are made from drop-forged chrome molybdenum with a heat-treated tempered edge. Molybdenum is ideally suited for chisels because of its known reputation for hardness, toughness and wear resistance. Used mainly for light demolition, chiselling, stripping plaster, mortar chasing, channelling and breaking through brickwork.1 x Faithfull SDS Plus Chasing Gouge 22mm Length 250mmAdditional Information:• Type: Gouge• Size: 22 x 250mm

• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 130mm Working length. • Supplied in a plastic wallet.HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 130mm Working length. Supplied in a plastic wallet.• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 130mm Working length. • Supplied in a plastic wallet. • Model No. BSB17.5Technical Specification:Size: ø17.5 x 190mmDimensions: Length: 20mm x Height: 210mmWeight: 0.205KgWarranty: Consumabl…

The HSS-R construction of this drill bit guarantees exceptional durability and heat resistance, owing to the high-speed steel composition. Rapid chip removal during drilling minimizes heat buildup, extending the drill bit's lifespan. The precision-ground tip enhances cutting efficiency, allowing for smooth and precise drilling in metal surfaces. With a diameter of 11mm and a length of 142mm, this drill bit excels in drilling through various metals, including steel and aluminium. Its design ensures clean and accurate holes, making it an indispensable addition to your toolkit for metal fabrication, construction, and other demanding applications. The 11mm diameter provides the strength and precision …

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 9mm • Total Length: …

The HSS Twist Drill Bit Titanium offers maximum lifetime while drilling holes in metal. When using the appropriate cooling system, the drill bit has the lowest possible level of friction and minimal wear, due to its titanium-nitride coating. The high surface quality of this ground twist drill bit, which is made from HSS (high-speed steel), allows for extended usage. It is suitable for use on alloyed and non-alloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. The HSS Twist Drill Bit Titanium is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Full length bevel edged blades manufactured from carbon steel hardened, tempered, finely ground and clear lacquer coated for corrosion protection. Impact - resistant polypropylene handles. All blades have blade guards. Display packed.

SDS Drill Bit 12x140x200mmC.K SDS Concrete Drill Bit 12x140x200mm~ Tungsten carbide tipped with optimized geometry for drilling concrete and stone~ Vacuum brazed tips for durability~ Ground flutes designed for optimum debris removal~ SDS-plus shank~ Diameter: 12 mm~ Working length: 140 mm~ Total length: 200 mmTechnical DataDiameter: 12mmWorking length: 140mmOverall length: 200mmComponent Material:Tungsten tipTechnical Specification:CE Certified: NoConflict Materials Content : YesConflict material Country of Origin: GermanyConflict material Name of substance: TungstenREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger …

Crafted from high-speed steel (HSS) with a titanium nitride (TiN) coating, this drill bit offers exceptional durability and heat resistance, ensuring long-lasting performance in a variety of drilling applications. This jobber drill bit is ideal for creating precise and accurate holes in metal, wood, plastic, and other materials. The TiN coating reduces friction and heat buildup during drilling, resulting in smoother drilling and extended tool life. Features & Benefits • Versatile bit for both hand-held and machine drilling • Titanium Nitride Tipped (2mm and above) • Bright finish and conventional point (below 2mm) • DIN 338 • Specially designed 118° Point Angle Specifications …

High quality metal twist drill bits for precise drilling in metal. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for a long service life. Very good concentricity. Tough viscous tempered bits ensure a particularly long service life. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Twist bit for metal applications • Hex shaft for very good power transfer • HSS = high speed steel with split point • Finely-tuned material elasticity for great durability • Very good concentricity Contents: 848 HSS Metal Twist Drill Bits, 3.3 x 40 mm

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Expert Quality, HSS drill bits, manufactured to DIN338 and ISO235/1 specifications. Display packed.

These Faithfull chisels are suited to cutting bricks during building work. This chisel has a suitably hardened cutting edge, but should not be used on concrete containing reinforcing bars.

Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high quality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank.