Car Subwoofers Abyss Q10E-COR14  all car subwoofers →

Flat Subwoofer / Diameter 200 mm / Nominal Load 150 Watt

Space-saving subwoofer solution Recommended power: 800 – 2500 watts. Voice coil 63 mm copper Long-stroke sandwich beading. Solid cast aluminium basket

Input/Output : Other Sound Mode : Extra Bass Mode Category : Speakers Use : Home Input Power(W) :

100 watts RMS 300 Watts Maximum Impedance 4 Ohm 16.5 cm SPL 90db 1 W 140 mm, 42 mm/1 m frequency response: 35 Hz – 21 kHz EÖ: Woofer Tweeter et: 47 mm, 14 mm woofer tweeter

Flat Subwoofer / Nominal Load 130 Watt

Protect your investment with the stylish and tough KTE-8G grille for 8" Alpine Type-R subwoofers. Brand: Alpine Model number: KTE-8G

Peak Power Handling: 350 Watts RMS Power Handling: 175 watts Frequency Response: 30 - 500Hz Sensitivity: 87.46dB

30 cm marine subwoofer. load capacity: 200 watts rms / 400 watts max. Impedance: 4 + 4 Ohm. Fs 28.5 Hz, Qts 0.59, VAS 107.7 litres. Sound pressure: 89 dB. Xmax: 7 mm. Black grid. Polypropylene membrane with UV protection, black. Aramid fibre resistant to moisture, cracks, wear and tear. Can be used in closed, bass reflex or free air. Installation depth: 122 mm. Installation opening: 2 mm. 76 mm.

Car Subwoofer Speaker / Diameter 300 mm / Mounting Depth 115 mm / 300 watt / Nominal Load 200 Watt / 94 dB / Impedance 8 Ohm

BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s) HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an …

Diameter 250 mm / 10 Inch / 360 watt / Nominal Load 150 Watt / Impedance 4 Ohm

1000 Watts MAX / 500 watts RMS 42 Hz frequency response and 88dB sensitivity Aluminium Voice Coil Subwoofer with treated paper membrane and rubber base

Boss R935, 5-Channel Mosfet Power Amplifier, Riot Series + Subwoofer Remote Control, 4 x 80 Watts RMS + 1 x 150 watts @ 4 ohms stereo, 4x 150 Watt RMS + 1 x 300 Watts @ 2 ohm stereo

Model Number : TS-A1672S Special Features : 6 COAXIAL 4-WAY. Audio Sensitivity : 91dB/W Signal To Noise Ratio : 91dB Frequency Range (Hz) : 35Hz~22KHz Out Power : 650W Material Type : Tweeters Item Size : 6 Inch Color Name : Black Voltage : 12V Speakers Types : Coaxial speakers Brand Name : REAKOSOUND Origin : Mainland China Certification : CE Item Type : Speakers Item Size : 6 Inch Frequency Range (Hz) : 35Hz-22KHz Audio Sensitivity : 91dB Speakers Types : Coaxial Speakers Voltage : 12V Car Make : Universal Out Power : Out Power Impedance : 4Ω Signal To Noise Ratio : 91dB Special Features : None Rated Power : 75W Install Diameter : 160mm Install Depth : 40mm Product Weight : 1150 G / 40.57

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Spoked Subwoofer Grille designed for Kicker Comp,CompVT, CompVR, CompVX, and Solo Classic subwoofers series Simple installation Stylish black metallic finish Protects exposed Subwoofer from potential damage Dimensions: 10" (25cm)

Boss Audio Systems BX-10 Subwoofer Ripper Series 350 RMS, 700 Watt max. Factory packaging

Material: Metal Size: Side length 5.5cm Diagonal screw center distance 6cm Diagonal outer diameter 6.7cm Interior opening 4.8cm Installation height 3.4cm Impedance : 4 ohms, Power : 14 watts Weight: About 85g Color: As shown in the figure Package includes: 1 Pcs Product features: 1. Neodymium magnetic 2 inch full frequency speaker using neodymium magnet, has a greater magnetic force, can provide a stronger driving force, so that the sound quality is clearer and richer. 2. This speaker uses a 2-inch full-frequency design, with a wide range of sound coverage and fine and full sound quality. No matter it is low or high, it can be performed vividly. 3. The shell of the horn has been carefully

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.