Car Subwoofers Abyss Q10E-ELA14  all car subwoofers →

Car Subwoofer Speaker / Diameter 300 mm / 12 Inch / 300 watt / Nominal Load 150 Watt / Impedance 1 x 4 Ohm

Optimally blended pulp cone reproduces natural sound with a smooth frequency response Rubber surround supports the linear movement while reducing unwanted resonance Powerful strontium magnet precisely drives the cone and delivers clear sound Wide sound dispersion expands the listening sweet spot Unique fixture provides flexible mounting options, designed to fit a variety of locations

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Boxed Subwoofer / Diameter 200 mm / 8 Inch / 250 watt / Impedance 1 x 4 Ohm

Boss NEO12, 12" (30cm), Ripper Series, 300W RMS, 600W MAX, Impedancy: 4 ohms

2) NEW ROCKFORD FOSGATE **R2D4-12** 12" 1000W 4-Ohm DVC Prime R2 Car Audio Subwoofer Power Handling (Max): 500 Watts per sub (1000 Watts per pair) Power Handling (RMS): 250 Watts per sub (500 Watts per pair) Features: 12-gauge compression terminals

Inserts slugly into Gen-2 P3S trim rings. Protects against surround and cone damage. Sized to fit Gen-2 P3S woofers

Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass. Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily …

Kicker 10 Inch 4 Ohm 500W Subwoofer for Marine Audio / Part # 45KM104 Compatible with: Marine Package Contains One Subwoofer The KICKER KM 10-inch Marine Subwoofer is made to work perfectly in a sealed or ported enclosure. You want the kind of bass that makes your friends want to be where the party is. KICKER Marine subs make it happen, with 10 and 12-inch drivers made for sealed or ported enclosures. Completely weather-resistant, these 10 and 12-inch marine subs are real-world tested for salt/fog and UV exposure, meeting or exceeding ASTM standards for marine durability.

Fully maximized Sealed motor structure UV resistant one-piece cast-polymer baskets Sealed magnet & rubber surrounds Polypropylene cone

Features: 10" 600W subwoofer, 360° to enhance the bass effect, nice sound quality, giving you a nice musical experience. Built-in amplifiers, reliable performance, can amplify the weak signal from the sound source and promote the sound of the speaker. High-quality aluminum alloy housing, fine workmanship, nice durability and shock resistance. Ultra-thin design, space-saving. Delivery includes installation wires, stable transmission and smooth connection, help you quickly complete the installation. Easy to install and use, compatible with 12.0V voltage for car, truck, RV, marine boat, etc. Specifications: Color: Black Material: Aluminum Alloy Power: 600W(Max.) Speaker Size: 10 Inch

Car Subwoofer Speaker / Diameter 178 mm / 7 Inch / 90 watt / Nominal Load 60 Watt / 88 dB / Impedance 2 x 4 Ohm

10"/250mm Subwoofer Grille for Kenwood KFC-W2516PS 1 Grille Only. Subwoofer on the photo is not included.

V Cone with pressed paper membrane for maximum lightness High excursion foam surround combining high sensitivity and deep bass response Designed to be used in small sealed or reflex box ABS gasket provided for aesthetically pleasant installation Continuous 250 W power handling

Feature:1. The height of the inverted tube is 115mm and the opening is 100mm. It is suitable for speakers with 8-12 inch speakers. 2. The inner side is and the bell ends are designed at both ends. The airis very and the airis obviously improved. 3. Speaker inverting hole, also known as sound tube and air hole, often used in inverting type speakers.It is mainly to overpower the air sound of the speaker vibration in the box and overlap the sound pressure of the radiation in front of the speaker to produce a bass effect. 4. With anti - rat net to prevent rats from damaging the product, more considerate. . Made of high quality ABS plastic, this product is sturdy and . Specification:Item Type:

Car Subwoofer Speaker / Diameter 381 mm / 15 Inch / 1.800 watt / 88 dB

300 Watts RMS 1300 Watts Max PP Cone Rubber Surround Steel Basket

Membrane diameter: 165 mm Capacity: 180/90 Watt RMS/Max Impedance: 4ohm Mounting Depth: 63 mm

Reminder: 1.Due to the light, there is a slight difference between the actual color and the picture color, please take the received object as the standard. 2.Due to different measurement methods, there is a gap of 1-2cm between the measurement and the actual size. Item Name: Car Audio Speaker Sensitivity: 90dB/W/M Frequency Response: 55Hz-20KHz Voltage: 12V Magnet Specification: 60 Ferrite Distortion: ≤1Percent Features: Mid-bass, High-resolution, Low Impedance Impedance: 4Ohm Peak Power: 90W Rated Power: 45W Material : Magnet Size Details: 16cm x 4.7cm/6.3" x 1.85" (Approx.) Specifications: Adopting high temperature pure copper silver coil, the car speaker can

Flat Subwoofer / Diameter 200 mm / Nominal Load 150 Watt