Drill Bits

1m SDS Drill Bit Set 3 Pcs~ Set of 3 drills each 1 meter length~ Impact Resistant Tungsten Carbide Tips for durability~ Contents each 1 piece: 12 x 1000, 16 x 1000, 24 x 1000 mmTechnical Specification:CE Certified: NoConflict Materials Content : YesConflict material Country of Origin: ChinaConflict material Name of substance: TungstenREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger Included: NoMains Powered: NoDimensions: Length: 28mm x Height: 1092mmWeight: 3.12KgWarranty: 12 months. AVIT products are guaranteed for 1year against imperfect materials or workmanship. Damage caused through normal wear and tear …

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

Bosch 2608685861 SDS Max-4 Drill Bit For Masonry 16mmTake on the toughest drilling challenges in concrete and masonry with the Bosch 2608685861 SDS Max-4 Drill Bit. This robust 16mm diameter bit is engineered for exceptional performance and durability, making it a reliable choice for professional contractors, construction workers, and serious DIY enthusiasts.Features:
- Featuring high-quality carbide construction, this drill bit boasts exceptional wear resistance. This ensures the bit stays sharp and delivers long-lasting performance, even after extensive use in tough drilling conditions
- The 4-cutter design minimises jamming and binding when encountering rebar within concrete. This reduces …

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The Bosch 2608577139 is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metals & plastics The extremely strong body provides extreme robustness. These drill bits are precision ground from solid metal with an oxide coated flute for slicing through materials with reduced wear. Active cutting and perfect centering due to pointed split point tip. 1/4" hex shank for universal use with drill drivers, impact drivers and drill stands. Features: Extremely strong body provides extreme robustness Suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metals & plastics Manufactured …

Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn't jam and presents no weakness on impact.For construction professionals drilling concrete and reinforced concrete regularly, for example for fixings and installations, the Bosch EXPERT SDS plus-7X Hammer Drill Bit offers peerless performance, reliability and longevity. It is THE EXPERT accessory for SDS plus rotary hammer drills.Features:- Long Life Drilling Reinforced Concrete- Exceptionally …

Drilling Through Reinforced Concrete Is A Tough Job, And It Has Traditionally Taken Its Toll On Drill Bits. Regular Two-Cutter Bits Get Stuck In Rebar And They Eventually Break. The Full Carbide Head On The Expert Sds Plus-7x Is An Advanced 4-Cutter Design Made From A Single Piece Of The Toughest Metal: It Doesn'T Jam And Presents No Weakness On Impact.For Construction Professionals Drilling Concrete And Reinforced Concrete Regularly, For Example For Fixings And Installations, The Bosch Expert Sds Plus-7x Hammer Drill Bit Offers Peerless Performance, Reliability And Longevity. It Is The Expert Accessory For Sds Plus Rotary Hammer Drills.Features: - Exceptionally Durable Drill Bit Tip With Bosch …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Hammer drill bit SDS plus-3: 5,5 x 100 x 160 mm, 6 x 100 x 160 mm, 7 x 100 x 160mm, 6 x 150 x 210 mm, 6,5 x 150 x 210 mm, 7 x 150 x 210 mm, Chisels: 250 mm centring tip for a precise drilling start 4-Flute Design Reinforced core section for better wear resistance and stability when drilling in concrete Long Life Chisels Self-sharpening pointed chisel. Suitable for drilling, demolition and correction in concrete and masonry

This drill bit has a hexagonal shank system and works with all drill drivers with a 13-mm chuck. The Auger Bit is ideal for fast drilling-accuracy when producing through-holes, pre-drilling for rafter nails and drilling deep dowel holes in wood. The heavy-duty self-feeding tip pulls the bit through completely, which allows for quick and effortless precision-drilling. Straight holes and a high chip removal rate and increased speed are made possible by the bit's optimised low-friction flute geometry with a solid centre. Its optimised scoring spur and precision-ground main cutting edge produce accurate holes. It is ideal for use in the ancillary building trades, for carpenters and roofers, and …

The SDS plus-7X Drill Bit provides an outstanding lifetime when drilling in reinforced concrete. Its full-carbide 4-cutter head is composed of the highest-quality carbide, which fortifies the head and provides exceptional impact resistance. Its consistent distribution of drilling power guarantees there is no power loss, which increases the overall lifetime. Bosch´s unique diffusion welding technology (IDS) provides a strong bond between head and flute. Moreover, the 4-flute design with wide channels reduces wear on the bit by allowing for effective dust removal. This bit is intended for hammer drilling in masonry, concrete and reinforced concrete. To achieve accurate results, the visibility o…

Sds Plus-5x Drill Bit Offers Highly Efficient Drilling In Reinforced Concrete Turn-Angle Head And 4-Flute Design Provide Fast Dust Removal For Increased Drilling Speeds And Reduced Wear Centring Tip Guides Drilling From The Start For Efficient Work And Exact Hole Diameters Pgm Guarantee In Compliance With Tight Tolerances, Exactly Drilled Holes And Firm Hold Of Fixings As Proof Of Quality, The Drill Bit Bears The Test Mark Of The Pgm Masonry Drill Bit Association Board, Guaranteeing Compliance With Tight Tolerances, Exact Drilling And The Firm Hold Of Fixings. It Is Compatible With Rotary Hammers With Sds Plus Holders. Geometrical Form Of The 4-Cutter Head Prevents Jamming And Breakage For Optimal …

Up to 5x more precise than a standard drill bitThe modern construction site requires working on many different materials, and you never know what you will need to drill next. Finding the right drill bit can be difficult and time-consuming – unless you have the Expert MultiConstruction Drill Bit.This highly versatile drill bit can drill accurately into hard materials such as tile and granite without skidding, thanks to its sharp tip and advanced geometric design. Made from optimised carbide using our fine grinding manufacturing technique, it can also tackle concrete, brick, wood and metal. It can always do a professional job – whatever the material.The Bosch Expert CYL-9 MultiConstruction Cyli…

This 10 Piece SDS+ Drill & Chisel Set is suitable for drilling and chiselling in Masonry and Concrete Supplied in a handy aluminium carry case, this 10 piece SDS+ drill and chisel set is ideal for tough drilling and chiselling in Masonry and Concrete. This set contains multiple sizes of SDS+bits varying in size from 5mm to 20mm in diameter. Features:
- Designed to be used with both corded and cordless SDS Plus Hammer Drills
- Suitable for drilling and chiselling Masonry and Concrete
- Varying lengths of bit ranging from 5mm to 20mm diameter
- Also with 2 chisels Contents:
- Aluminium carry case with handle
- Drill Size: 1 x 5.5 x 110mm
- Drill Size: 1 x 6 x 110mm
- Drill Size: …

The Complete Set for Any Project
The Makita P-90358 60-Piece Pro Power Drill Accessory Set is the perfect solution for any professional or DIYer. This comprehensive set includes a variety of drill bits, screwdriver bits, and nut drivers, all of which are made from high-quality materials and built to last. The set also comes in a stylish, heavy-duty case for easy storage and transport.Features:
- 60 pieces of high-quality drill bits, screwdriver bits, and nut drivers
- Made from durable materials
- Built to last
- Stylish, heavy-duty case for easy storage and transportApplications:
- Drilling holes in wood, metal, and plastic
- Driving screws
- Tightening nuts
- Any other task that requires …

Makita's Nemesis II SDS Plus drill bits are PGM Sichersafe certified, with centering tips and symmetrical 4-cutter heads. Drilling into reinforced concrete is no longer a hit and miss application, reinforcing bar being no obstacle for the Nemesis drill. Also perfect for use in the hardest of natural stone. Nemisis II drill bits have a wear mark on the head that highlights any compromise in PGM certified drilling accuracy. As long as the wear mark is still visible, the drill bit is suitable for making anchor holes. Its unique symmetrical head geometry ensures precision drill holes. Perfect for critical anchor fixings and where spot drilling is required. The Nemesis will drill up to 50% more holes …

Makita's Nemesis II SDS Plus drill bits are PGM Sichersafe certified, with centering tips and symmetrical 4-cutter heads. Drilling into reinforced concrete is no longer a hit and miss application, reinforcing bar being no obstacle for the Nemesis drill. Also perfect for use in the hardest of natural stone. Nemisis II drill bits have a wear mark on the head that highlights any compromise in PGM certified drilling accuracy. As long as the wear mark is still visible, the drill bit is suitable for making anchor holes. Its unique symmetrical head geometry ensures precision drill holes. Perfect for critical anchor fixings and where spot drilling is required. The Nemesis will drill up to 50% more holes …

Makita's Nemesis II SDS Plus drill bits are PGM Sichersafe certified, with centering tips and symmetrical 4-cutter heads. Drilling into reinforced concrete is no longer a hit and miss application, reinforcing bar being no obstacle for the Nemesis drill. Also perfect for use in the hardest of natural stone. Nemisis II drill bits have a wear mark on the head that highlights any compromise in PGM certified drilling accuracy. As long as the wear mark is still visible, the drill bit is suitable for making anchor holes. Its unique symmetrical head geometry ensures precision drill holes. Perfect for critical anchor fixings and where spot drilling is required. The Nemesis will drill up to 50% more holes …

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

Forged and tempered cold chisel. Applications: Concrete, demolition, render, tiles, bathrooms etc. Specifications • Diameter: 40mm • Overall Length: 250mm • Shank: SDS-PLUS • Working Length: 190mm • Pack Quantity : 1Features & Benefits• Made of good quality product • Designed for easy use • Quality Makita accessories that compliment power tools and garden tools