Drill Bits

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 6.8mm • Total Length: …

For use with SDS+ hammer drills. Packed on storage hanger.

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60. Manufactured to BS 3066.

The Milwaukee Shockwave Multi-Material Drill Bits have been designed with a 2 cutter carbide tip to provide durability along with versatility for drilling into a wide range of tough materials including; Concrete, Bricks, Roof Tiles, Thin Metal, Ceramic, Tiles, Wood, PVC, Aluminum, Drywall and More. Equipped with a 1/4" hex shank, these multi-material drill bits are compatible with impacts, drill/drivers, and hammer drills. Milwaukee Shockwave Multi-Material Drill Bits provides the ideal all-in-one solution for the widest variety of materials, tools, and applications. Specifications • Cutting Width: 6.5mm • Length: 200mm • Pack Quantity: 1Features & Benefits• For use with …

The Long HSS Twist Drill Bit Ground is for drilling deep holes through metal with maximum precision. Its extended length makes this long bit capable of drilling deeply. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. The Long HSS Twist Drill Bit Ground is manufactured to DIN 340. The drill bit is Type N (flute angle) with …

• Fully ground HSS drill bit manufactured to DIN 338.• 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration.• Efficient clog-free swarf clearance.• Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper.• High-density case for safe storage.Fully ground HSS drill bit manufactured to DIN 338. 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper. High-density case for safe storage.• Fully ground…

Crafted from high-speed steel (HSS) with a titanium nitride (TiN) coating, this drill bit offers exceptional durability and heat resistance, ensuring long-lasting performance in a variety of drilling applications. This jobber drill bit is ideal for creating precise and accurate holes in metal, wood, plastic, and other materials. The TiN coating reduces friction and heat buildup during drilling, resulting in smoother drilling and extended tool life. Features & Benefits • Versatile bit for both hand-held and machine drilling • Titanium Nitride Tipped (2mm and above) • Bright finish and conventional point (below 2mm) • DIN 338 • Specially designed 118° Point Angle Specifications …

The Faithfull Professional Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user. These drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.This Drill Bit has the following specification:Tip Diameter: 8.5mmWorking Length: 72mmOverall Length: 117mmAdditional Information:• Tip Diameter: …

Milwaukee Hex Shank Flat Drill Bit for fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard. Ideal for door locks, morticing, electrical and plumbing work. 1/4? Hex shank reception for direct insertion into the power tool or for secure chuck grip. Ground centre point for accurate positioning and sharp wings for improved cutting performance. Specifications • Cutting Width: 26mm • Length: 160mm • Pack Quantity: 1Features & Benefits• Fast drilling of big diameters • Suitable for drilling in natural hard and softwood and chipboard • Ideal for door locks, morticing, electrical and plumbing work • 1/4? Hex shank reception …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

These Faithfull Professional Cobalt Jobber Drill Bits are manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance and cutting performance. All bits are fully ground and feature a 135° non-slip split point for precise centring and are produced in accordance to DIN 388 for high precision tolerances and geometric accuracy. Cobalt bits cut faster and last longer and are suitable for heavy-duty industrial work in: Alloy steels, carbon steels, cast iron, hardened alloy steels, stainless steels, high temperature alloys, Titanium alloy, high strength steel and carbon fibre composite materials.These Faithfull Professional Cobalt Jobber Drill Bits are supplied …

These brad point drill bits have an SDS Plus shank and are intended for drilling into wood with an SDS Plus drill. The brad point tip helps to ensure accurate starting. Note that these drill bits should only be used with the hammer mode switched off. Specifications • Shank: SDS Plus • Diameter: 8.0mm • Overall Length: 147mm • Working Length: 75mm • Quantity: 1

Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.Diameter: 15mmOverall Length: 152mmAdditional Information:• …

The HSS-R construction of this drill bit guarantees exceptional durability and heat resistance, owing to the high-speed steel composition. Rapid chip removal during drilling minimizes heat buildup, extending the drill bit's lifespan. The precision-ground tip enhances cutting efficiency, allowing for smooth and precise drilling in metal surfaces. Features & Benefits • For drilling into soft steel and non-ferrous metals • High speed steel for general purpose drilling into metal • Round shanks for use with corded and cordless hammer drills • Reduced shank – Diameters 14-16mm have a reduced shank to 12.7mm Specifications • Diameter: 8mm • Drill Length: 117mm • He…

The Milwaukee Shockwave Multi-Material Drill Bits have been designed with a 2 cutter carbide tip to provide durability along with versatility for drilling into a wide range of tough materials including; Concrete, Bricks, Roof Tiles, Thin Metal, Ceramic, Tiles, Wood, PVC, Aluminum, Drywall and More. Equipped with a 1/4" hex shank, these multi-material drill bits are compatible with impacts, drill/drivers, and hammer drills. Milwaukee Shockwave Multi-Material Drill Bits provides the ideal all-in-one solution for the widest variety of materials, tools, and applications. Specifications • Cutting Width: 8mm • Length: 120mm • Pack Quantity: 1Features & Benefits• For use with Concrete,…

Advanced technology sets the STA53018 apart, ensuring precise and consistent results across a spectrum of tasks. Its ergonomic design ensures user comfort during prolonged use, providing a secure grip and precise control. Designed for efficiency and reliability, this Stanley accessory delivers top-notch results across diverse applications. Features & Benefits • For drilling into house bricks and masonry • For use in corded and cordless drills and impact drivers • Hex shank prevents bit slipping in standard drill chucks Specifications • Diameter: 6mm • Length: 127mm • Working Length: 69mm • Shank/Connection: Hex

Bosch 2608900570 HEX-9 Multi Construction Drill Bit 4mm The Bosch 2608900570 HEX-9 drill bit has a 4mm diameter and is ideal for drilling practically all materials including concrete, brick, wood, plastic and more. The 1/4" shank provides optimum power output whilst the carbide centering tip ensures a precise start up and good control. This model is extremely durable thanks to its diamond ground cutting edges. Features:
- Suitable for drilling practically all materials including concrete, brick, wood, plastic, thin sheet metals, ceramic and tile
- 1/4" hex shank for optimum power transfer
- The carbide centering tip ensures a precise start up and good control when drilling
- Diamond-ground …

Patented groove point and cutting edge. Parabolic scoop. Increased relief angle. Large shank. Durable design. Images are for illustration purposes only.

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.

This drill bit is compatible with a 1/4-inch hex-shank system for universal use with drill drivers, impact drivers and drill stands. The Impact Control HSS Twist Drill Bit offers highly robust drilling in metal, especially with impact drivers. Extremely strong body is extremely robust. The twist drill bit is precision-ground from solid metal and has an oxide-coated flute, giving it an excellent surface quality for slicing through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metals and plastics. Pack of 1 • Highly Robust with Impact Drivers • Impact Control HSS Twist Drill Bit …

The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP500PRO Professional Jobber Drill Bits have the following specifications: Diameter: 5.0mm. Pack quantity: 2.Additional Information:• Tip Diameter: 5.0mm• Working Length: 50mm• Overall Length: 85mm• Pack Qty.: 2

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck. For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…