Drill Bits

The IRWIN SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more …

The 9529 Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.Size: 38mm.

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø12 x 600mmWeight: 0.242KgWarranty: Consumable

Bosch 2608587164 CYL-9 Ceramic Tile Drill Bit 8mm The Bosch 2608587164 drill bits are suitable for drilling through soft-to-medium hard tiles thanks to their simple flute-less design. They are compatible with both corded or cordless non-impact drills with a cylindrical shank system and allow for dry drilling without lubrication. This makes working effortless and convenient for optimum productivity. In addition to this, they are extremely durable and long lasting. Features:
- Dry drilling without lubrication is possible, which makes working with this bit effortless and convenient
- Simple flute-less design makes these bits suitable for drilling through soft-to-medium hard tiles
- The bit …

Drills for professional use. Tungsten carbide tip for strength and durability. Fits to all machines with SDSplus or Hilti-chucks. For use in concrete, brick and masonry. Specially designed flutes for fast efficient dust removal. TMS treatment provides stress relief for superior strength.

This Milwaukee Concrete Drill Bit has the following specification: Diameter: 7mmWorking Length: 60mmOverall Length: 100mm

• Fully ground HSS drill bit manufactured to DIN 338.• 135° Split point is self-centring for easier penetration.• Efficient clog-free swarf clearance.• For use with both hand and pillar drills.• Suitable for drilling high carbon steels and copper.• High-density case for safe storage.Fully ground HSS drill bit manufactured to DIN 338. 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper. High-density case for safe storage.• Fully ground HSS drill bit manufactured to DIN 338. • 135° Split …

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck. For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135 split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.

SDS-plus-5X drill bits are specially designed with a centring tip for active and accurate centring in concrete. They have a 4-cutter geometry that prevents jamming in rebar and the drill bit tip does not break off. They have a 4-flute design for fast dust removal giving higher drilling speeds and longer life. Centring tip for active and accurate centring in concrete. The asymmetrical drilling head design is unique, ensuring outstanding dust removal and reduced wear. 4-cutter geometry prevents jamming in rebar. The drill bit tip does not break off. 4-flute design gives fast dust removal for higher drilling speed and less wear. Suitable for masonry, concrete and reinforced concrete. Appropriate …

• Fully ground HSS drill bit manufactured to DIN 338.• 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration.• Efficient clog-free swarf clearance.• Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper.• High-density case for safe storage.Fully ground HSS drill bit manufactured to DIN 338. 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper. High-density case for safe storage.• Fully ground…

Bosch EXPERT SelfCut Speed Spade Bit for Fast and Efficient Wood Drilling 16mm x 152mmThe Bosch EXPERT SelfCut Speed Spade Bit is the fastest and most efficient way to drill holes in wood. The unique Bosch Tip Technology features a self-feeding thread that pulls the bit into the wood, so you can drill with less effort and get cleaner, faster results. The clever wave-shaped spade design also helps to remove chips quickly and easily, so you can drill through even the thickest wood without clogging. These Bosch Spade Bits are perfect for electricians, carpenters, and other professionals who need to drill holes in wood for cables, pipes, and other hardware installations. It is also ideal for DIYers …

Bosch 2608584676 HSS-G Hole Saw Pilot Drill 6.35mm x 38mm x 80mm 1/4in Hex Shank The Bosch 2608584676 has a 1/4 Inch Hex Shank, a 6.35mm diameter and a working length of 38mm. The Pilot Drill Bit drills the pilot hole in order to guide the hole saw into position. Use this pilot bit when cutting holes through a wide variety of materials. It is suitable for use with all corded and cordless drill drivers. Features:
- The Pilot Drill Bit HSS G delivers more robustness and precision than its predecessor
- Pilot Drill Bit drills the pilot hole in order to guide the hole saw into position
- Pilot bit cuts holes through a wide variety of materials Specification:
- Diameter: 6.35mm
- Working …

The Bosch 2608597165 HSS Installation Drill Bit with tapered flute, offset drill bit and shank end
The Bosch 2608597165 HSS Drill Bit has a 6mm drilling diameter and an overall length of 400mm. The drill bit and straight shank end are screw-connected, ensuring a low risk of breakage, keeping operations running smoothly. The tapered flute, offset drill bit and shank end prevent jamming in moist wood or cutting through embedded nails. The cylindrical shank is compatible with three-jaw drill chucks. This drill bit is suited to drilling in softwood, hardwood, drywall board and aluminium.
Features:
- Installation Drill Bit is very robust for formwork

- Tapered flute, offset drill bit and shank e…

The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135 split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.

Bosch 2608900583 HEX-9 Multi Construction Drill Bit 12mm x 150mmThe Bosch 2608900583 HEX-9 drill bit has a 12mm diameter, 90mm working depth and 150mm overall length. It is ideal for drilling practically all materials including concrete, brick, wood, plastic and more. The 1/4" shank provides optimum power output whilst the carbide centering tip ensures a precise start-up and good control. This model is extremely durable thanks to its diamond ground-cutting edges.Features:
- Suitable for drilling practically all materials including concrete, brick, wood, plastic, thin sheet metals, ceramic and tile
- 1/4" hex shank for optimum power transfer
- The carbide centering tip ensures a precise start …

The Bosch 2608596335 HSS Drill Bit for versatile drilling in multilayer building materials or sandwich materials
The Bosch 2608596335 HSS Drill Bit has an 8mm drilling diameter and an overall length of 400mm. The drill bit and straight shank end are screw-connected, ensuring a low risk of breakage, keeping operations running smoothly. The tapered flute, offset drill bit and shank end prevent jamming in moist wood or cutting through embedded nails. The cylindrical shank is compatible with three-jaw drill chucks. This drill bit is suited to drilling in softwood, hardwood, drywall board and aluminium.
Features:
- Installation Drill Bit is very robust for formwork

- Tapered flute, offset drill …

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck. For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

This Faithfull Lip amp; Spur Wood Drill Bit has the following specification: Diameter: 14mm.Working Length: 105mm.Overall Length: 160mm. Note: Image is for illustrative purposes only and may differ from the actual product

This range of Bosch HSS drill bits have a reduced shank. Suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. Key Features of this Bosch Reduced Shank Drill Bit: - PointTeQ tip design remains sharp and ensures continuous durability for fast drilling in metal - Increased drilling rate generates less heat and wear - Self-centering tip prevents wandering for quick and easy drilling starts - High elasticity for low risk of breakage - Black-oxide coated flute provides fast chip removal - Manufactured to DIN 338, Type N (flute angle), 135 tip

Forged from high quality S2 steel. Colour-coded for guaranteed fast identification. Fitted with magnetic screw holder.

The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118 point shape for drilling a wide selection of materials.

• Fully ground HSS drill bit manufactured to DIN 338.• 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration.• Efficient clog-free swarf clearance.• Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper.• High-density case for safe storage.Fully ground HSS drill bit manufactured to DIN 338. 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper. High-density case for safe storage.• Fully ground…

Wera Zyklop HMA 1/4in Drive Metric Production Sockets for hex-head fasteners are suitable for manual and (non-impact) machine applications. Knurling at lower end to enable easy gripping when used in manual applications. Equipped with a ball stop groover. Utilises the Wera 'Take it Easy' tool finder size stamping on the socket and a colour-coded band for rapid and easy identification of the required size. Made from chrome vanadium steel with a matt chrome-plated finish. Manufactured to ISO 2725 Part 3.