Drill Bits

Milwaukee HSS-G Thunderweb Drill Bit design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the Tunderweb core is thicker than that of a standard drill bit. Specifications • Cutting Width: 1.1mm • Length: 36mm • Pack Quantity: 10Features & Benefits• Parabolic web cross section: Large web thickness and strength built in • Thunderweb flute form ejects hot chips rapidly • Dissipates heat better increasing life time • Precision starting, drill bit won't walk on material surface • Polished finish reduces friction …

Dewalt DT4772 Extreme Impact Flatwood Drill Bit 26mm x 152mm The Dewalt DT4772 drill bits are designed for drilling wood materials such as chipboard, softwood and hardwood. It has been manufactured with a robust steel shank for increased durability and champered outer cutting spurs for razor sharp, clean precise drilling. Features:
- Ideal for door locks, electrical and plumbing work Specification:
- Cutting Diameter: 26mm 
- Length: 152mm
- Pack Quantity: 1

Containing a 2.0mm and 3.0mm pilot drill bit, this compact set is ideal for pre-drilling holes for screws. The drill bits have hex shanks which mean they can be used in a wide variety of power tools, including electric screwdrivers. Features & Benefits • For drilling small pilot holes for screws • Hex shank: fits into screwdriver bit holders and corded or cordless drills • Suitable for drilling wood Specifications • Diameter: 2.0mm, 3.0mm • Shank: 1/4" Hex

The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like:BrickworkCeramic TilesBreeze BlockWoodDry WallGypsum BoardLimestoneSlateMarbleEternitePlastics/Reinforced plastics.Length: 200mm Diameter: 6.5mm Flute Length: 126mmAdditional Information:• …

For use with SDS+ hammer drills. Contents: 1 x SDS+ Flat Chisel, 40mm

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Specifications: • Diameter: 5.5mm • Length: 110mm • Working Length: 50mm • Pack Qty: 1Features & Benefits• The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry …

Fully ground HSS drill bit manufactured to DIN 338. 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper. High-density case for safe storage. Features & Benefits: • Fully ground HSS drill bit manufactured to DIN 338. • 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration. • Efficient clog-free swarf clearance. • Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper. • High-density case for safe sto…

Dewalt Black & Gold Hex Impact HSS Drill Bits are impact rated drill bits which are suitable for use in impact drivers as well as standard drills. Suitable for drilling into metal, wood and plastic. Features & Benefits • Impact rated: suitable for drills and impact drivers • Standard sized (1/4") hex shank • Tough Core for increased durablility • Split point for accurate starting with reduced walking • Black & Gold finish protects against rust Specifications • DeWalt Product Code: DT20611-QZ • Diameter: 7.5mm • Quantity: 1

Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet. Features & Benefits: • Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. • Fully hardened with a screw point to aid location and smooth drilling. • Supplied in a plastic wallet. • Model No. AW12X600 Specifications: Model No AW12x600 Brand: Worksafe Size: Ø12 x 600mm

HSS TiN metal drill bit set
Economy 6 piece set
Straight shank
2, 3, 4, 5, 6 and 8mmm bits

HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 115mm Working length. Supplied in a plastic wallet. Features & Benefits: • HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 115mm Working length. • Supplied in a plastic wallet. • Model No. BSB14.5 Specifications: Model No BSB14.5 Brand: Worksafe Size: Ø14.5 x 170mm

The IRWIN® Blue Groove 4X Flat Bits have a patented groove point and cutting edge, designed to cut and not scrape the timber. They are 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.1 x IRWIN® Blue Groove 4X Flat Bit 24 x 152mmAdditional Information:• Diameter: 24mm• Overall Length: 152mm• Pack Qty.: 1

Dewalt DT4775 Extreme Impact Flatwood Drill Bit 32mm x 152mm The Dewalt DT4775 drill bits are designed for drilling wood materials such as chipboard, softwood and hardwood. It has been manufactured with a robust steel shank for increased durability and champered outer cutting spurs for razor sharp, clean precise drilling. Features:
- Ideal for door locks, electrical and plumbing work Specification:
- Cutting Diameter: 32mm 
- Length: 152mm
- Pack Quantity: 1

Bosch 2608831014 SDS+ 3 Drill Bit For Masonry 6.5mm x 200mm x 260mm The Bosch 2608831014 is a single SDS plus-3 drill bit with a diameter of 6.5mm and a working depth of 200mm. The drill bit is suited to drilling in masonry and concrete. It is extremely long-lasting and wear-resistant thanks to its high-alloy steel construction and features a 4-flute dura design which provides effective dust removal for optimised drilling performance. For use with rotary hammers with SDS plus holders. Features:
- SDS plus-3 Drill Bit offers durability while drilling concrete
- 4-flute dura design provides effective dust removal for increased endurance
- High-alloy steel produced with optimised hardening …

The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill (2). Size 8.5 x 117mm.Working Length: 70mmAdditional Information:• Tip Diameter: 8.5mm• Working Length: 70mm• Overall Length: 117mm• Pack Qty.: 1

Stanley drill bits are designed to resist the impacts and fast drilling on concrete. The flute design removes the debris from the hole contribution for longer drill bit life. The hardened steel construction of the drill bit ensures exceptional strength, allowing it to withstand the toughest drilling applications. Whether you are working on soft or hard surfaces, its reinforced carbide tip provides maximum durability and longevity, ensuring consistent performance throughout projects. Features & Benefits • For drilling into house bricks and masonry • Shank diameter of drill bits 10-13mm is reduced to 9.5mm • Diameters larger than 13mm shank is reduced to 12.7mm • For use with …

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Manufactured to ISO 5468 Specifications Contents: 1 x SDS+ Masonry Drill, 12.0 x 210mm

Up to 5x more precise than a standard drill bitThe modern construction site requires working on many different materials, and you never know what you will need to drill next. Finding the right drill bit can be difficult and time-consuming – unless you have the Expert MultiConstruction Drill Bit.This highly versatile drill bit can drill accurately into hard materials such as tile and granite without skidding, thanks to its sharp tip and advanced geometric design. Made from optimised carbide using our fine grinding manufacturing technique, it can also tackle concrete, brick, wood and metal. It can always do a professional job – whatever the material.The Bosch Expert CYL-9 MultiConstruction Cyli…

Octagonal shank chisel from selected steel with polished cutting edge. Generally in accordance with BS3066 Contents: 1 x Octagonal Shank Cold Chisel, 19 x 250mm (Sold Loose)

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The Faithfull Professional Long Series HSS Jobber Drill Bits have a longer length for deeper drilling requirements. Designed to meet the requirement of the professional user, these drills are manufactured from M2 grade steel and are fully ground to meet the requirements of DIN 338 and feature a 135 degree non slip split point. Their robust design gives less breakage, easier hole start and improved penetration. Suitable for use in: Alloy Steels, Carbon Steels, Cast Iron, Hardened Alloy Steels, Stainless Steels.The Faithfull FAIPP330LS Pre Pack HSS Jobber Drills Long Series 3.3mm have the following specifications:Diameter: 3.3mm. Overall Length: 106mm. Pack quantity: 2.Additional Information:• …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The DeWalt Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability. A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures. Features & Benefits • Typically used for drilling anchor, plastic plug, fixing or pipework clearance holes • Anti-Slip shank • Suitable for masonry, brick, stone, tiles and light concrete • Unique hard metal with low-stress …

Bosch 2608577174 HSS PointTeQ Twist Drill Bit 10mm The Bosch 2608577174 drill bit is suitable for fast drilling in metal thanks to its PointTeQ tip design. The self-centering tip prevents wandering, making quick and easy drilling starts possible. Increased drilling rate generates less heat and wear keeping the tips sharper for longer and ensuring continuous durability. Features:
- PointTeQ tip design allows for fast drilling in metal
- Self centring tip
- Made from high speed steel for long life Specification:
- Pack Qty: 1
- Size: 10mm