Drill Bits

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 Specifications Contents: 1 x Masonry Drill Bit, 14 x 150mm

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. Sizes 10mm and above feature cutting spurs.1 x Bahco 9629-38 Flat Bit 38mmAdditional Information:• Diameter: 38mm• Overall Length: 160mm• Pack Qty.: 1

The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials.The Irwin IRW10502256 HSS Pro Drillbits comes in a bulk pack of 10. Specifications:Drillbit diameter: 2.5mmTotal length: 57mmWorking Length: 30mmAdditional Information:• Tip Diameter: 2.5mm• Working Length: 30mm• Overall Length: 57mm• Pack Qty.: 10

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60. Manufactured to BS 3066.

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Specifications: • Shank Diameter: 1/4 hex • Dia Metric: 12 • Overall Length Metric: 152

• Tungsten carbide tipped with optimized geometry for drilling concrete and stone • Vacuum brazed tips for durability • Ground flutes designed for optimum debris removal • SDS-plus shank • Diameter: 12 mm • Working length: 140 mm • Total length: 200 mm Specifications: Diameter = 12mm Working length = 140mm Overall length = 200mm

Expert Quality, metric-sized high speed steel drills (with 5% COB alt). The addition of COB alt to HSS prevents wear for longer life. Contents: 1 x HSS Cobalt Drill Bit, 8.3mm

Octagonal shank chisel with recessed end to accept toothed or plain edge scutches. Supplied with one replaceable comb scutch. Generally in accordance with BS3066 Contents: 1 x Scutch Holding Chisel, 25 x 200mm (Display Packed)

The Blue Spot Tools 4-22mm Step Drill is specially designed for precision drilling of holes in aluminium, brass, copper, plastic, steel and wood. Manufactured from high steel for increased durability and cutting power. Titanium coated to reduce friction and heat. 2mm step increments. Additional Information:• Size Range: 4-22mm• No. of Steps: 10

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.Specifications:Diameter: 22mm.Working length: 50mm (2in).Overall length: 100mm (4in).Additional Information:• Diameter: 22mm• Overall …

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill …

The solid carbide construction ensures exceptional hardness and wear resistance, making it perfect for drilling through tough materials like stainless steel, cast iron, and hardened metals. The TiN (Titanium Nitride) tip coating enhances the drill's cutting efficiency and longevity by reducing friction and heat buildup. This allows for faster drilling speeds and extended tool life. Designed with a jobber length, the Dormer R003 offers optimal balance between rigidity and reach, ensuring accurate and clean holes every time. Features & Benefits • Bright and TiN tip coating • Hard material solid carbide • 120° drill point • Cylindrical shank/straight shank • Standard …

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

This drill bit has a hexagonal shank system and works with all drill drivers with a 13-mm chuck. The Auger Bit is ideal for fast drilling-accuracy when producing through-holes, pre-drilling for rafter nails and drilling deep dowel holes in wood. The heavy-duty self-feeding tip pulls the bit through completely, which allows for quick and effortless precision-drilling. Straight holes and a high chip removal rate and increased speed are made possible by the bit's optimised low-friction flute geometry with a solid centre. Its optimised scoring spur and precision-ground main cutting edge produce accurate holes. It is ideal for use in the ancillary building trades, for carpenters and roofers, and …

Rotabroach RAP120 Pilot Pin For 12mm Cutters Only

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

These Faithfull SDS Plus Chisel Bits are made from drop-forged chrome molybdenum with a heat-treated tempered edge. Molybdenum is ideally suited for chisels because of its known reputation for hardness, toughness and wear resistance. Used mainly for light demolition, chiselling, stripping plaster, mortar chasing, channelling and breaking through brickwork.1 x Faithfull SDS Plus Chasing Gouge 22mm Length 250mmAdditional Information:• Type: Gouge• Size: 22 x 250mm

Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high quality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank. Contents: 1 x Draper Expert Flat Wood Bit, 38mm

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…

Bosch 2608587163 CYL-9 Ceramic Tile Drill Bit 7mm The Bosch 2608587163 drill bits are suitable for drilling through soft-to-medium hard tiles thanks to their simple flute-less design. They are compatible with both corded or cordless non-impact drills with a cylindrical shank system, and allow for dry drilling without lubrication. This makes working effortless and convenient for optimum productivity. In addition to this, they are extremely durable and long lasting. Features:
- Dry drilling without lubrication is possible, which makes working with this bit effortless and convenient
- Simple flute-less design makes these bits suitable for drilling through soft-to-medium hard tiles
- The …

Milwaukee MX4 SDS Plus drill bits have a symmetrical 4 cutter geometry (4 x 90°) and are ideal for making perfect round holes when fitting anchors. The high volume flutes ensure efficient removal of dust and debris while drilling, and a centering tip enables quick and accurate starting. Features & Benefits • Symmetrical 4 cutter geometry • High volume flutes ensure efficient removal of dust and debris • Centering tip for easy spot drilling with pinpoint accuracy • Welded solid carbide tips on sizes 5mm - 10mm • Increased carbide results in higher durability • Four breaker points pulverize material for faster drilling • Enhanced rebar guards for improved …

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…