Multi Tool Blades

Stainless steel brushes do not cause "after rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel.Specifications:• Shank diameter: 3.2 mm• Working diameter: 19.0 mm• Accessory length: 44.0 mm• Maximum RPM: 15.000 1/min

Stainless steel brushes do not cause "after rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel.

Brass brushes are non sparking and softer than steel. They will not scratch soft metals like gold, copper or brass.Specifications:• Working diameter: 19mm• Shank diameter: 3.2mm

Brass brushes are non sparking and softer than steel. They will not scratch softer metals like gold, copper or brass.Specifications:• Working Diameter: 13mm• Shank Diameter: 3.2mm• Weight: 9.1g

Piloted Corner Rounding Bit. Rounding over edges and corners. Suitable for use on Veneered woods, fibreboard, chipboard, plywood, softwood, hardwood, rubber, plastic, plexiglass and carbon Technical Specifications Shank diameter: 3.2mm. Working diameter: 6.4mm. Working length: 2mm Accessory length: 36mm Usage: straight. Maximum speed: 35,000rpm. Essential attachment: Shaper /Router table Ref.231

For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Sanding bands are easily replaceable.Specifications:Shank diameter: 3.2 mm Working diameter: 6.4 mm Grit: 60 Pack of 2

Saw blade for detailed cuts in wooden materials. This blade has 7 teeth per centimeter ensuring the finest cutting results.Technical specifications:Total length - 100 mm Cutting depth - 12 mm Teeth per centimeter - 7 Blade width - 0,2 mm Blade depth - 1,9 mm

Saw blade for straight and large diameter curved cuts in wooden and plastic materials. This blade has 6 teeth per centimeter ensuring a good balance between speed and precision.Technical specifications:Total length - 100 mm Cutting depth - 18 mm Teeth per centimeter - 6 Blade width - 0,4 mm Blade depth - 2,5 mm

The DeWalt DT20712 Multi-Tool Roofing Blade is a multi-material blade for cutting through many different materials. The blade is quick and easy to change and is fits all common oscillating tools. Suitable for the following materials: • Asphalt roofing shingles • Carpet • Cardboard • Vinyl flooring • Foam insulation

Use for finishing work and light deburring. For paint and rust removal without removing any of the base material.Specifications:Shank diameter: 3,2 mm Working diameter: 13,0 mmMaximum RPM: 20.000 1/min

Ideal for polishing metals and plastics. Using polishing compound no. 421 with wheels produces a high luster. Use 414, 422 and 429 with mandrel 401. Use 423 and 425 with mandrel 402.Specifications:Shank diameter: 3,2 mm Working diameter: 10,0 mmPack of 4

Versatile brush for removing rust and corrosion, polishing metal surfaces, deburring and blending surface junctures or cleaning electrical components.Specifications:• Shank diameter: 3.2 mm• Working diameter: 19.0 mm• Accessory length: 44.0 mm• Maximum RPM: 15.000 1/min

Precision ground for quick, easy sharpening of chain saw blades. Use with Dremel Chainsaw sharpening attachment No. 1453Specifications:Shank diameter: 3,2 mm Working diameter: 4,8 mm Pack of 3

Precision ground for quick, easy sharpening of chain saw blades. Use with Dremel Chainsaw sharpening attachment No. 1453Specifications:Shank diameter: 3,2 mm Working diameter: 5,6 mm Pack of 3

Precision ground for quick, easy sharpening of chain saw blades. Use with Dremel Chainsaw sharpening attachment No. 1453Specifications:Shank diameter: 3,2 mm Working diameter: 4,5 mm Pack of 3

Use on metals, castings,welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding of most materials.Specifications:Shank diameter: 3,2 mm Working diameter: 4,8 mm Pack of 3

Use on metals, castings,welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding of most materials.Specifications:Shank diameter: 3,2 mm Working diameter: 3,4 mmMaximum RPM: 25.000 1/min Pack of 3

The Dremel SC541 Grinding Wheel is ideal for grinding and deburring different types of metal. Because of the glass fibre reinforced 38mm diameter wheel you can grind faster and more efficiently. The SpeedClic system enables quick, easy and keyless accessory change. Specifications:Shank diameter: 3,2 mm Working diameter: 38,0 mm

Diamond blade suitable for cutting ceramic. 60mm Cutting length.Features & Benefits:• Diamond blade suitable for cutting ceramic.• 60mm Cutting length.• Model No. SMTA60TCSpecifications:Model No SMTA60TCBrand: SealeyNett Weight: 0.024kg

BlueSpot 20 piece cleaning and polishing set comprising the following: 3 x 1in Polishing wheels.1 x Polishing compound.1 x Felt polishing wheel with shank.3 x Nylon brushes: 7/8in, 1/2in, 1/8in nylon brush.1 x 7/8in Steel brush.2 x Mandrels.2 x 7/8in Emery polishing wheels.1 x Felt polishing tip.6 x 1/2in Felt polishing wheels.Additional Information:• Application: Cleaning & Polishing• No. Pieces: 20

To be used with Dremel glue gun model 940 (195 °C). To glue wooden materials.Specifications:Length: 100 mm Diameter: 11 mm Operating temperature: 165-195 °CPack of 12

Quality cutters for detail engraving, carving, routing in wood, fiberglass, plastic and soft metals.Specifications:Shank diameter - 3.2 mmWorking diameter - 0.8 mmMaximum RPM: 35.000 1/minPack of 3

Quality cutters for detail engraving, carving, routing in wood, fiberglass, plastic and soft metals.Specifications:Shank diameter - 3.2 mmWorking diameter - 1.6 mmMaximum RPM: 35.000 1/minPack of 3

Quality cutters for detail engraving, carving, routing in wood, fiberglass, plastic and soft metals.Specifications:Shank diameter - 3.2 mmWorking diameter - 2.4 mmMaximum RPM: 35.000 1/minPack of 3