Car Pumps & Compressors

Maximum pressure up to 110 psi. Designed for inflating all type of bicycle tires with the ability to top up a car tire pressure from 26 psi to 36 psi. Maximum running time up to 15 mins at the optimum pressure range 30 to 55 psi Equipped with a bright LED light that allows you to working in dark environments. Noise level around 72 dB, similar to vacuum cleaner or hair dryer. It is relatively quieter when compare with other compressors in the market. High-capacity 2200mAh built-in rechargeable Li-ion battery, last longer after one charge.

Pistol-grip tyre inflator fitted with a clip-on connector that's compatible with most vehicles including; cars commercial vehicles motorbikes and trailers. The easy to read 65mm analogue gauge is attached with a heavy-duty rubber cover for increased protection. Maximum inflation pressure 12 bar (170psi). Supplied with a 1/4 BSP male adaptor.PTDDRPDIR91273"

Heavy-duty extruded aluminium body and zinc head. Linear pressure scale in psi and bar. Fitted with 0.5m rubber hose with steel protection sleeve and clip-on air connector.Tyre Inflator with Clip-On Connector• Heavy-duty extruded aluminium body and zinc head. • Linear pressure scale in psi and bar. • 0.5m Rubber hose with steel protection sleeve. • Range: 0-9.6bar(0-140psi). • Fitted with clip-on connector.• Hose Length: 350mm.• Model No. SA395Model No: SA395:Brand: Sealey:Inlet Size: 1/4BSP:Maximum Air Supply: 13.8bar(200psi):Minimum Air Supply: 6.9bar(100psi):Nett Weight: 1.01kg:Range: 0-9.6bar(0-140psi):PTDSEASA395

These Twin Hold-on Connectors are suitable for inflation of twin tyres. A Closed End connector is used when air is supplied directly from a main air line (i.e. compressor or air receiver). A non-return valve unseats on connection to the tyre's valve allowing air to flow into the tyre. The handles on these connectors are red in colour. Twin Hold-on Connector. Inlet size Rp 1/4.

Fast Inflation: HOTO electric air compressor use 19mm large cylinder and high-power magneto enable super-fast inflation. With maximum pressure 150PSI. It can air up a car flat tyre in 8.5mins or a mountain bike flat tyre in just 129s. 5 Modes: With 4+1 modes, air pump can inflate cars, motorcycles, bikes, balls or manual control. Enabled by 0.1bar accurate digital tyre pressure measuring technique, it will auto-stop when reaching preset value, thus avoiding overinflation. USB-C Charging: The built-in 2500mAh capacity 7.2V battery allow for inflating 2.5 tyres if fully charged. The standard Type-C charging port is compatible with the charging cable of other smart devices, allowing for charging …

GB1021914-01 Quick Release Plug without Valve by Zoro Select

Easy to read, accurate and made from a robust aluminium tube with strong ABS plastic parts.

Spray gun with gravity cup metal Spray brush with suction cup in metal design Tyre inflator with pressure gauge reading in bar and psi 4 m spiral air hose with quick coupling

Ideal for inflating car tyres, bike tyres or sports balls, it will top up a car tyre to 32PSI in just 42 seconds Rapid inflation up to 11 Bar/160 PSI at 16l/min Easy to use controls allow automatic shut off at any pressure you choose and there is a digital pressure readout for accurate inflation Includes thumb lock tyre valve, sports ball needle, presta valve and high pressure tapered nozzle with convenient on-board storage 60cm hose allows for flexible reach

Hose and AdaptersFeatures:- For Inflatable Boats, Toys, Towables, Air Beds, Balls, and more- High Volume air flow- Inflates or deflates quickly- Comes with various valves and 4.5 hose1- 2 liter per stoke 2 PSI

TRUSTED: Suitable for all makes and models, the ResQ Inflator provides powerful and reliable tyre inflation for when needed. AirMan products are made to the highest OEM standards and approved by leading vehicle manufacturers SIMPLE: Our compressor uses a high quality, workshop specification analogue gauge to give accurate readings. No fancy digital gauges to go wrong or misread, just simple no-nonsense readings every time. CONVENIENT: Supplied with a compact case, the ResQ weighs only 855g and measures a small 150 x 140 x 61mm to fit in glove boxes, under seats or in the boot. The long power cable measures 3 meters long to provide access to all tyres EASY TO USE: Simply plug in the 12v connector,…

In-line tyre inflator fitted with a clip-on connector compatible for most vehicles including; cars commercial vehicles motorbikes and trailers and the easy to read 55mm gauge is attached with a heavy-duty rubber cover for increased protection. Maximum inflation pressure 12 BAR (170psi). Supplied with a 1/4 BSP male adaptor.PTDDRPDIR91320"

Manufactured to comply with EN 12645. Aluminium body with rubber bumper. Linear pressure scale dual calibrated in psi and bar with parallax correction. 0.5m Flexible hose fitted with 240mm twin push-on air connector.Tyre Inflator with 0.5m Hose & Twin Push-On Connector• Manufactured to comply with EN 12645.• Aluminium body with rubber bumper.• Linear pressure scale dual calibrated in psi and bar with parallax correction.• 0.5m Flexible hose fitted with 240mm twin push-on air connector.• Range: 0-9.5bar(0-138psi).• Model No. SA371Model No: SA371:Brand: Sealey:Inlet Size: 1/4BSP:Maximum Air Supply: 15bar(218psi):Minimum Air Supply: 5.5bar(80psi):Nett Weight: 1.15kg:Range:

Open ended twin hold on tyre valve inflator connector. 1/4in. female thread. With an overall length of 250mm. For use on standard bore tyre valves. Features and Benefits Black colour coded handle to allow you to easily identify the correct tool (black for open ended) Suitable for use with MK3 tyre inflator, PCL wall gauges and PCL portable gauges

Thank you for ordering wireless intelligent portable air pump, making inflating easier and more convenient. This product can be used for inflating cars, motorcycles, bicycles, electric cars and balls, small inflatable toys, etc., and can also be used as tire pressure meter and flashlight. Features: There are two types for you to select: wire and wireless.  Four Modes Optional:cars, electric vehicles, bicycles and balls are switched by one press, with various functions and a wide range of uses. Preset tire pressure, full stop, automatic operation. Working light at night, ensuring the safety of charging at night and can be used as a night lighting when come across emergency. Updated LED light w…

This single foot pump is gauge-calibrated to 0-7 bar and 0-100 psi and fitted with an easy to read dial gauge. The all steel construction provides added strength, and the barrel is pressure-sealed. It has a sturdy anti-slip pedal and rubber feet, and is supplied with adaptors for airbeds, cycle valves and football. Features and Benefits Constructed from high strength steel for overall product longevity Has been barrel pressure sealed to prevent any leakage Boasts and anti-corrosive finish Anti-slip rubber pedal to ensure optimum grip when pumping up your desired object Typical Applications Ideal for use when inflating footballs, airbeds and bicycles Notes Also available as a single foot pump …

QS-4 4mm OD Equal Coupling by Zoro Select

Bosch Miscellaneous Part Original Manufacturer