Drill Bits

Faithfull Cobalt Quick-Change Impact Drill Bits feature a revolutionary tip design that is far superior to any other drill bit in the industry. These innovative drill bits have 7 cutting edges and 3 peaks that offer several distinct competitive advantages - Super-accurate self-centring - you can make a hole in a round-pipe with one hand. - Speed - twice as fast as split point drill bits. - Tool lifetime - up to 10 times longer life in mild steel. Manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance. The cutting performance is fantastic, both on precision and degree of finish, leaving much less defects (burr) than other drill bits. Its protruding centre …

Dewalt DT9526 Extreme 2 SDS Plus Drill Bit 7mm x 210mm The Dewalt DT9526 drill bits are suitable for use on masonry, stone and brick. The optimised flute design allows for clean, precise debris removal and the superior carbide grade calls for longer life and greater durability Features:
- Longer life, faster drilling and greater durability
- Hardened body for extra strength and reduced breakage Specification:
- Diameter:  7mm
- Length:  210mm
- Working Length:  150mm
- Pack Quantity:  1

Bosch 2608900580 HEX-9 Multi Construction Drill Bit 7mm The Bosch 2608900580 HEX-9 drill bit has a 7mm diameter and 150mm overall length. It is ideal for drilling practically all materials including concrete, brick, wood, plastic and more. The 1/4" shank provides optimum power output whilst the carbide centering tip ensures a precise start-up and good control. This model is extremely durable thanks to its diamond ground-cutting edges. Features:
- Suitable for drilling practically all materials including concrete, brick, wood, plastic, thin sheet metals, ceramic and tile
- 1/4" hex shank for optimum power transfer
- The carbide centering tip ensures a precise start up and good control …

Expert CYL-9 Multi Construction Drill Bit - start holes accurately with a specially-designed centering tip The Bosch 2608900619 has a 7mm diameter, working length of 90mm and an overall length of 150mm with a straight shank. This drill bit is ideal for drilling practically all materials including concrete, brick, wood, plastic and more. The modern construction site requires working on many different materials, and you never know what you will need to drill next. Finding the right drill bit can be difficult and time-consuming - unless you have the EXPERT MultiConstruction Drill Bit. The Bosch EXPERT CYL-9 MultiConstruction Cylindrical Drill Bit is the one drill bit that should always be in your …

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck. For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

Designed for fast and efficient drilling in brickwork, concrete and breeze block. Drills up to 60% faster than competitive drill bits and still with the same high durability. Unique, pressed carbide tips for aggressive cutting. Drill speed up to 60percent faster than competitive drill bits whilst maintaining the same high durability. Single flute design. Pressed diamond-ground carbide tip. Unique carbide tip design. Chrome vanadium body. High durability.

Bosch 2608587159 CYL-9 Ceramic Tile Drill Bit 5mmSimplify your ceramic tile drilling tasks with the Bosch 2608587159 CYL-9 Ceramic Tile Drill Bit. This 5mm diameter bit ensures clean and precise holes in soft to medium-hard tiles, making it perfect for various projects.Features:
- Unlike some tile drill bits, the Bosch CYL-9 eliminates the need for messy lubricants. This allows for dry drilling, keeping your workspace clean and reducing prep time
- The unique flute-less design of this bit minimises friction during drilling. This translates to smoother penetration into tiles, reducing chipping and ensuring clean hole edges
- The cylindrical shank is compatible with a wide range of corded and …

Bosch 2608587161 CYL-9 Ceramic Tile Drill Bit 6mm The Bosch 2608587161 drill bits for tile are ideal for drilling soft-to-medium hard tiles thanks to their simple flute-less design. You can dry drill without lubrication with these drill bits which makes working effortless and convenient for optimum productivity. They are extremely durable and long-lasting for the most precise drilling tasks. Features:
- Dry drilling without lubrication is possible, which makes working with this bit effortless and convenient
- The simple flute-less design makes these bits suitable for drilling through soft-to-medium hard tiles
- The bit is compatible with corded or cordless non-impact drills with a cylindrical …

Torsion zone for absorption of peak loads
1/4in Hexagon drive x 25 mm Card of 2 x Pozidriv 2 point
855/1 TH Pozidriv Torsion PZ2 Extra Hard Bit 25mm Carded Pack of 2

For Fein, Bosch, Holz-Her, Metabo, and Lecurex hexagon drives
Torsion zone for absorption of peak loads
Extra hard

Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Extra-hard. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Suitable for Pozidriv screws • Torsion zone for absorption of peak loads • Enhanced service life of the bits • Particularly hard for semi-hard materials • 1/4" hexagon drive (Wera connecting series 1) Contents: 1x 855/1 TH SB bits, PZ 3 x 25 mm, 2 pieces; 2x 855/1 TH bits: PZ 3x25

The CYL-9 MultiConstruction Drill Bit delivers stable drilling in all kinds of materials. Its centring tip provides a steady drilling start and good guidance universally. The diameter-optimised AWB brazing and hardening technology increases the robustness of the 2-cutter drill bit and reduces vibration during use. Additionally, the bit's 4-flute dura design with a reinforced core section delivers better wear resistance and stability when drilling soft concrete. The bit is intended for practically all materials in interior fitting work, e.g. soft concrete, masonry, brick, cement asbestos, light building materials, multilayer materials, ceramics and tiles, wood, plastic, sheet metals and aluminium.…

The IRWIN® Blue Groove 4X Flat Bits have a patented groove point and cutting edge, designed to cut and not scrape the timber. They are 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.The Irwin IRW10502810 Blue Groove 4x flat bit has the following specific dimension:Diameter: 17mmAdditional Information:• Diameter: 17mm• Overall Length: 152mm• Pack Qty.: 1

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The Irwin Granite drill bit range has been designed for impact / percussion drilling in very hard materials such as granite, concrete and natural stone. They can drill 40% more holes than conventional masonry drill bits due to an extra hard, thicker and more robust carbide tip. The rounded cutting edges mean higher durability resulting in 50% more accurately sized holes per drill bit.The Irwin IRW10501907 Granite drill bit has the following dimensions:Drillbit diameter: 8.0mmTotal length: 120mmWorking Length: 70mmAdditional Information:• Diameter: 8.0mm• Overall Length: 120mm• Working Length: 70mm• Pack Qty.: 1

The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like:BrickworkCeramic TilesBreeze BlockWoodDry WallGypsum BoardLimestoneSlateMarbleEternitePlastics/Reinforced plastics.Length: 160mm Diameter: 5.5mm Flute Length: 109mmAdditional Information:• …

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

The Stanley Flatwood Drill Bit is high quality combined with other hard materials with modern design. Quick drilling without the “drill” effect thanks to the special construction of the drill head. Clean CNC burr holes used in the production and unique tip design make this drill ideal for drilling in wood. With its superior construction, this drill bit ensures longevity and reliability throughout extensive use. The solid steel body offers enhanced strength and stability, resulting in a longer lifespan compared to other standard drill bits. Features & Benefits • Ground central point for accurate drilling • Cutting edges for fast, clean drilling • Hex shank prevents bit slipping in s…

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bit suitable for a variety of applications. Drills are fully hardened and ground.Technical Specification:Size: ø15 x 210mmDimensions: Length: 10mm x Height: 270mmWeight: 0.148KgWarranty: Consumable

The IRWIN® SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have …

High carbon steel hardened and tempered. Shank diameter 6mm. For use with power drills. Display packed in plastic hang up wallets.

The Multi-Sharp® ATT2003 Silicon Carbide Replacement Grinding Wheel fits the ATT 2001 Multi-Sharp® Drill Bit Sharpener.For resharpening masonry and hammer bits, flat wood bits and re-edging small tools. Comes with two replacement nylon bearings and fitting instructions. Specifications: Diameter: 36mm.Max 3000rpm.Additional Information:• Type: Replacement Part

• Fully ground HSS drill bit manufactured to DIN 338.• 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration.• Efficient clog-free swarf clearance.• Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper.• High-density case for safe storage.Fully ground HSS drill bit manufactured to DIN 338. 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper. High-density case for safe storage.• Fully ground…