Drill Bits

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 4.8mm • Total Length: …

The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP200PRO Professional Jobber Drill Bits have the following specifications: Diameter: 2.0mm. Pack quantity: 3.Additional Information:• Tip Diameter: 2.0mm• Working Length: 23mm• Overall Length: 50mm• Pack Qty.: 3

The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP330PRO Professional Jobber Drill Bits have the following specifications: Diameter: 3.3mm. Pack quantity: 2.Additional Information:• Tip Diameter: 3.3mm• Working Length: 35mm• Overall Length: 65mm• Pack Qty.: 2

Faithfull Multi Construction Drill Bits are suitable for use in most materials encountered in the building industry. They can be used on brick, tile, concrete, metal, aluminium, wood and plastic, and are ideal for multi-layer materials. The diamond-ground carbide tip has advanced performance cutting edges for a long working life and the flute is designed for fast debris removal. Perfect for use in cordless drills when used on both rotary or hammer modes, dependent on the material being drilled (4mm bit rotary only).1 x Faithfull Multi Construction Drill Bit 4 x 75mmAdditional Information:• Tip Diameter: Working Length• Overall Length: Pack Qty.• 75mm: 1

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Milwaukee Hex Shank Flat Drill Bit for fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard. Ideal for door locks, morticing, electrical and plumbing work. 1/4? Hex shank reception for direct insertion into the power tool or for secure chuck grip. Ground centre point for accurate positioning and sharp wings for improved cutting performance. Specifications • Cutting Width: 12mm • Length: 160mm • Pack Quantity: 1Features & Benefits• Fast drilling of big diameters • Suitable for drilling in natural hard and softwood and chipboard • Ideal for door locks, morticing, electrical and plumbing work • 1/4? Hex shank reception …

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, iron and most metals. Manufactured to meet DIN 338 standard.Size. 9.00 mm Dia.Additional Information:• Tip Diameter: 9.0mm• Working Length: 81mm• Overall Length: 125mm• Pack Qty.: 1

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

The CYL-3 Drill Bit provides lasting performance when drilling concrete. Its stamina is a result of a highly durable carbide blend specially developed and manufactured by Bosch. The blend is adapted to meet the demands of repeated use and offers high wear resistance when working with concrete. Moreover, the effective 2-flute U-shape design of the bit provides good dust removal, reducing friction, heat development and wear, resulting in an extended lifetime. The bit delivers lasting performance when drilling holes for fixings in abrasive materials such as concrete and natural stone. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing …

Octagonal shank chisel from selected steel with polished cutting edge. Sold loose.

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. Sizes 10mm and above feature cutting spurs.1 x Bahco 9629-12 Flat Bit 12mmAdditional Information:• Diameter: 12mm• Overall Length: 152mm• Pack Qty.: 1

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60. Manufactured to BS 3066.

Sold with 2 attachments: a silicone baby teat (6-12 months) and a fixed toddler attachment (from 12 months)
Wide neck: easy filling and cleaning
Stable base: can stand upright
Complete with two spouts
Solid base: can be stands
Sold with 2 attachments: a silicone baby teat (6-12 months), strong and toddlers (from 12 months
Wide neck: Easy Filling and Cleaning
Soft refillable pouch which is perfect for weaning baby with its first food

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.

Expert Quality, manufactured from hardened and correctly tempered carbon steel. Suitable for use with hand and power drills. Packed one or two drill bits per hang up card.

Extremely robust: the manufacture of solid metal leads to an extremely robust body of the Impact Control HSS spiral drill bit.
High durability: Precision ground spiral groove for reduced wear when drilling. The use of e.g. oil as a coolant, also extends the life of the spiral drill
Precise work: active cutting with low contact force and perfect centering thanks to split-point drill bit.
Areas of application: suitable for use in alloy and non-alloy steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Compatibility: Suitable for all hammer drills, drills and drill stands with hexagonal shank

A long-standing product range in the Dormer catalogue, A100 jobber length drill bits are suitable use in the majority of general-purpose engineering applications, whether used in machines or handheld power tools. Features & Benefits • High Speed Steel • Steam Tempered • DIN 338 • 118° Point Angle

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.

These DeWalt drill bits have a carbide split-point tip and aggressive flute angles, they deliver the power to easily drill through a range of materials without the need to change bits. A no spin shank helps to increase efficiency by eliminating bit slippage. Features & Benefits • Suitable for wood, plastics, mild steel and non-ferrous metals and masonry • CrNiMo steel for optimal power transmission and breakage stability • Anti-slip shank with 3 milled clamping surfaces prevent rotation of the drill bit in the chuck Specifications • Head Type: Carbide Grit • Diameter: 5mm • Product Length: 113mm • Working Length: 83mm • Shank/Connection: Round

DEWALT Brad Point Drill bits are manufactured from chrome vanadium alloyed steel. A centre location point and outer cutting spurs ensure clean accurate holes. Suitable for drilling hardboard, plywood, chipboard and all natural hard and softwood. For diameters 11mm and above, the shank is reduced to 9.5mm. The DEWALT DEWDT4507QZ Brad Point drillbit has the following dimensions Size 7 x 110mm

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 2.5mm • Total Length: …

• HSS Roll forged drill bit manufactured to DIN 338.• 118° Point tip.• Efficient clog-free swarf clearance.• Suitable for hand and pillar drills.• High-density storage case.HSS roll forged drill bit manufactured to DIN 338. 118° Point tip. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills. High-density case for safe storage.• HSS Roll forged drill bit manufactured to DIN 338. • 118° Point tip. • Efficient clog-free swarf clearance. • Suitable for hand and pillar drills. • High-density storage case. • Model No. DB015RFTechnical Specification:Nett Weight: 0.02kgPack Qty: 10Size: ø1.5mmDimensions: Length: 15mm x Height: 90mmWeight: 0.016KgWar…