Drill Bits

• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 125mm Working length. • Supplied in a plastic wallet.HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 125mm Working length. Supplied in a plastic wallet.• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 125mm Working length. • Supplied in a plastic wallet. • Model No. BSB17.0Technical Specification:Size: ø17 x 185mmDimensions: Length: 5mm x Height: 300mmWeight: 0.18KgWarranty: Consumable

The Faithfull Fluted Plugging Chisel has been designed to remove mortar from between bricks prior to re-pointing or the removal of a brick. The cutting edge is wider than the blade to give clearance, and the flute allows faster clearance of debris. Size 230 x 5mm (9 x 3/16in).

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 8.5mm • Total Length: …

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size.7 mm x 300 mm.Additional Information:• Diameter: 7.0mm• Overall Length: 300mm• Pack Qty.: 1

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Specifications: • Diameter: 5mm • Length: 160mm • Working Length: 100mm • Pack Qty: 1Features & Benefits• The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry …

Belongs in every toolbox: Masonry drilling made easy. This basic set with 7 masonry drill bits allows clean and precise drilling in masonry and stone. Covers the most common applications with drilling diameters between 3 and 8 mm.With cylindrical shank

Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 12.0mm.Total length: 300mm.Working length: 240mm. Note: Image is for illustrative purposes only and may differ from the actual product

• Suitable for drilling out spot welds, can be used on galvanized and high stress steels.• Solid Cobalt allows for resharpening which extends the product life.• Packed in high-density case for safe storage.Manufactured from HSS Cobalt. Can be resharpened for extended life. Supplied in high-density storage case.• Manufactured from HSS Cobalt. • Can be resharpened for extended life. • Supplied in high-density storage case. • Model No. AK4728Technical Specification:Length: 66mmNett Weight: 0.02kgSize: ø6mmDimensions: Length: 19mm x Height: 77mmWeight: 0.016KgWarranty: 1 year

Milwaukee HSS-G Thunderweb Drill Bit design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the Tunderweb core is thicker than that of a standard drill bit. Specifications • Cutting Width: 2.1mm • Length: 49mm • Pack Quantity: 10Features & Benefits• Parabolic web cross section: Large web thickness and strength built in • Thunderweb flute form ejects hot chips rapidly • Dissipates heat better increasing life time • Precision starting, drill bit won't walk on material surface • Polished finish reduces friction …

Blades manufactured from carbon steel hardened and tempered with blade guards. PVC oval handles. Display packed.

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

4 piece set adapted for SDS-Plus Hammers
Includes diameters 6mm, 8mm, 10mm and 12mm
Overall length 160mm
Supplied in a compact, easy to open butterfly type case
Bits can be easily located and removed
Ideal for masonry, indoor decorators, constructors and more

DeWalt's Extreme series Tri-Flute bits are impact rated with 1/4" hex shanks, making them suitable for use in impact drivers as well as all standard drills with a jawed chuck. They can be used for drilling holes up to 100mm deep into wood with corded and cordless machines. Specifications • Drilling Diameter: 16mm • Total Length: 152mm Please note 13mm bit is shown for illustration purposes only.Features & Benefits• Impact rated: suitable for use with impact drivers • Quick-change 1/4" hex shanks suitable for use in a wide range of machines • Tri-flute tapered design for faster removal of wood chips with less binding • Three cutting spurs for cleaner, faster holes …

This drill bit has a cylindrical shank system. The Brad Point Drill Bit offers precise drilling in soft and hard wood and can be used for through-holes and pocket holes. Its extremely sharp drill bit with a centring tip allows for exact hole positioning. Tear-free holes are produced by high-quality shoulder cutters with precise edges. For exact results, the two flutes prevent material from clogging the hole and provide good material removal. This drill bit is suitable for use on soft and hard wood. Pack of 1 • Precise Drilling in Wood • Brad Point Drill Bit offers precise drilling in soft and hard wood • Extremely sharp drill bit with a centring tip allows for exact positioning …

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bit suitable for a variety of applications. Drills are fully hardened and ground.Technical Specification:Size: ø18 x 250mmDimensions: Length: 10mm x Height: 320mmWeight: 0.2KgWarranty: Consumable

The CYL-9 Ceramic Tile Drill Bit is the standard choice when drilling in tiles. Dry drilling without lubrication is possible, which makes working with this bit effortless and convenient. Additionally, it has a simple flute-less design, which is especially suitable for drilling through soft-to-medium hard tiles. Drill without impact at low speeds. The bit is compatible with corded or cordless non-impact drills with a cylindrical shank system. Pack of 1 • Standard for Drilling in Tiles • CYL-9 Ceramic Tile Drill Bit is the standard choice when drilling in tiles • Dry drilling without lubrication for convenient use • Simple flute-less design is especially suitable for drilling …

The DT4910 Dewalt cobalt drill bit is 8% cobalt which maintains a sharper cutting edge and delivers 4x longer life versus DEWALT Black Oxide bits. The optimised tip and flute geometry delivers 2X the penetration speed, versus DEWALT Black Oxide bits, removes material faster and reduces heat build up. The stronger central core delivers 2X the resistance to breakage versus DEWALT Black Oxide drill bits. Specifications • Diameter: 6.8mm • Length: 109mm • Working length: 66mm • Pack Quantity: 1Features & Benefits

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

The IRWIN SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more …

The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135 split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.

The Faithfull Professional Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user. These drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.This Drill Bit has the following specification:Tip Diameter: 9.5mmWorking Length: 78mmOverall Length: 125mmAdditional Information:• Tip Diameter: …

The Milwaukee Metric HSS-G THUNDERWEB Metal Drill Bit design is unique, with a conical shaped web which gets thicker towards the back of the drill bit. It has a parabolic web cross section that gives a larger web thickness, increasing the strength of the bit and prevents breakage. The THUNDERWEB flute form ejects hot chips rapidly, dissipating heat better, increasing the life span and working time. The open flute form also reduces drill drawback, especially when drilling deeper holes. The 135 split point allows for precision starting, quick penetration, and requires less effort and feed pressure, and is perfect for drilling very hard materials. They are also great for drilling on curved surfaces.…

DeWalt's Extreme series Tri-Flute bits are impact rated with 1/4" hex shanks, making them suitable for use in impact drivers as well as all standard drills with a jawed chuck. They can be used for drilling holes up to 100mm deep into wood with corded and cordless machines. Specifications • Drilling Diameter: 22mm • Total Length: 152mm Please note 13mm bit is shown for illustration purposes only.Features & Benefits• Impact rated: suitable for use with impact drivers • Quick-change 1/4" hex shanks suitable for use in a wide range of machines • Tri-flute tapered design for faster removal of wood chips with less binding • Three cutting spurs for cleaner, faster holes …