Car Pumps & Compressors

Not available.

Spray gun with gravity cup metal Spray brush with suction cup in metal design Tyre inflator with pressure gauge reading in bar and psi 4 m spiral air hose with quick coupling

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 8mm(5/16) bore hose. 90° Angled connector for the difficult to reach valves.8mm Bore 90° Angled Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 8mm(5/16) bore hose.• 90° Angled connector for the difficult to reach valves.• Model No. PCL8AModel

Main Features: 1.This air compressor enables to inflates a standard mid-sized car tire from 0~36PSI (0-248KPA) in only 4-6 minutes. 2.It makes inflating low and flat tires in emergency easier and more convenient. Pressure Gauge Display of the air compressor unit: PSI, BAR, KPA, KGF/CM2. 3.Up to 3 meters of 12V car power cord, can effectively ensure the operation of the product radius, press the button to charge immediately without tightening. 4.Built-in a cable storage slot and hose storage slot, no need to need worry the cord is too long to put, more convenient to use. 5.With the built-in LED light, you won't have trouble seeing what you're doing with your tire, even when you're working

FEATURES:-Air pump function with 2 modes - 300L/min (4.5kpa) & 150L/min (2.5kpa).-Rechargeable - USB-C input or integrated solar panel.-3 light modes - high (150 lm), medium (100 lm), low (50 lm).-4000mAh powerbank - charge your devices with USB-A output.-Light and compact.-Robens Valve Adapter, 5 nozzles & USB to USB-C charging cable included.-IPX4 - Water resistant.-Power indicator light - battery capacity and charge time.-Hanging loop for easy attachment.SPECIFICATIONS:-Weight:275 g.-Size:7.3 x 4.8 x 13.3 cm (LxWxH).-Batteries:4000 mAh Li rechargeable battery.-

Spare parts for PCL tyre inflators. Features and Benefits Allows you to replace most aspects of your PCL tyre tools Department of Transport inspected to ensure quality and safety of your equipment

Description: Product Name: Tire Inflator Material: ABS, metal Weight: Net weight 545G Gross weight: approximately 628g Cylinder block: 19 cylinders Size: approximately 141 x 121 x 57mm Power cord length: approximately 3 meters Tracheal length: Tracheal length is approximately 40cm Output power: 120 (W) Rated voltage: DC12 (V) Packing list: 1 x Air Pump 4 x Inflatable Nozzles 1 x Instruction Manual The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws.

Pistol-grip tyre inflator fitted with a clip-on connector that's compatible with most vehicles including; cars commercial vehicles motorbikes and trailers. The easy to read 65mm analogue gauge is attached with a heavy-duty rubber cover for increased protection. Maximum inflation pressure 12 bar (170psi). Supplied with a 1/4 BSP male adaptor.PTDDRPDIR91273"

Description Material: Copper+Rubber Color: As the picture Size: One size Length: 8cm Diameter: 3.5cm Quantity: 1Pc Washing Care: Hand wash Label:Yes The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.

These Twin Hold-on Connectors are suitable for inflation of twin tyres. A Closed End connector is used when air is supplied directly from a main air line (i.e. compressor or air receiver). A non-return valve unseats on connection to the tyre's valve allowing air to flow into the tyre. The handles on these connectors are red in colour. Twin Hold-on Connector. Inlet size Rp 1/4.

Label:Yes Air flow: 15LPM MAX PSI: 300PSI Power: 60w Colour: Black Product size: 165*125*85mm Trachea:approx.45cm Weight: 350g Power cord length: 300mm Name: Micro Locomotive Air Pump Material: ABS Power Type: Cigarette Lighter Applicable: Quickly inflate for cars, bicycles, motorcycles, kayaks, balls, etc., simple, convenient and practical. (Not applicable to trucks and large trucks) Voltage: 12V-24V Tips: Please start the car first and then plug in the cigarette lighter. If you plug it in first and then start it, it may directly burn the product, remember! ! ! Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from

Material: Zinc alloy Color: As the picture Size: One Size Length: 5.5cm Package Included: 1PC Kindly Tips: 1. Please allow 1cm differs due to manual measurement. Please compare the detailed size with yours before you buy. 2. The color of the actual items may slightly vary from the above images due to different computer screen, thanks for your understanding. Label:Yes ,The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws. ,The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product

Features: Easy to use:Just plug into your car cigarette lighter for power, slip universal adapter over tire valve and youre ready to inflate. Portable and Lightweight:The inflator is made of ABS, it is lightweight and has compact design, convenience to put it in trunk of car and not occupy any space. Pressure Checking Gauge:The inflator is equipped with pressure checking gauge.Powered by your 12V car cigarette lighter. Scene:It is good for the emergency needs when you are on highway and countryside road or rush for office on the morning while the tire low pressure. Application:The prouct is suitable for highway or outdoor emergency when the tyre is flat, swiming ring, air bed, kayaks, ball and …

Hose and AdaptersFeatures:- Double action works on both up and down strokes- Inflates and Deflates- Provides up to 15 PSI pressure- Includes a 50 accordian style hose with 4 nozzles to fit most valves- Use for rubber boats, inflateable mattresses, watertoys and more