Car Subwoofers Incar DTA-1825  all car subwoofers →

Boss Audio Systems BX-10 Subwoofer Ripper Series 350 RMS, 700 Watt max. Factory packaging

Features THE ULTIMATE PARTY BOX SPEAKER ENCLOSURE: Say hello to the greatest 8 inch speaker box you'll ever . Say goodbye to unwelcome rattling disrupting your music's sound quality and the vibe- thanks to the -, resonant free recessed side panels sealed with our special aliphatic resin wood glue, our car audio speakers enclosure vastly improves the overall sound quality and of your system. PREMIUM QUALITY BUILD YOU CAN COUNT ON: Eachtruck speaker box is with high-grade MDF is 15mm thick for solid frequency response and music reproduction. You'll love the way the sounds in our 8 inch speaker enclosure. Unique Appearance Design: The plush grade charcoal carpeting of our car and truck speaker …

Flat Subwoofer / Diameter 200 mm / Nominal Load 150 Watt

30 cm marine subwoofer. load capacity: 200 watts rms / 400 watts max. Impedance: 4 + 4 Ohm. Fs 28.5 Hz, Qts 0.59, VAS 107.7 litres. Sound pressure: 89 dB. Xmax: 7 mm. Black grid. Polypropylene membrane with UV protection, black. Aramid fibre resistant to moisture, cracks, wear and tear. Can be used in closed, bass reflex or free air. Installation depth: 122 mm. Installation opening: 2 mm. 76 mm.

Suitable for speakers: no more than 2 inches high pitch , no more than 4 inches of mid-range The central hole is divided into two sections. Install a 4-inch midrange speaker, then remove the washer to install a 100mm diameter 4-inch midrange speaker. Install a 3-inch 3.5-inch midrange and use the washer on the pad. (If you install a 3.5-inch midrange speaker to install the aperture and speaker cover, you need to pay attention to the car a column is wider than 111mm). Tweeter Outer Diameter: 58mm Tweeter Internal Diameter: 47mm Mid-range External Diameter: 102mm Mid-range Internal Diameter: 85mm Maximum width of the bracket: 111mm Bracket length: 270mm color: White material: plastic Package Contents: …

Flat Subwoofer / Nominal Load 130 Watt

Kicker 10 Inch 4 Ohm 500W Subwoofer for Marine Audio / Part # 45KM104 Compatible with: Marine Package Contains One Subwoofer The KICKER KM 10-inch Marine Subwoofer is made to work perfectly in a sealed or ported enclosure. You want the kind of bass that makes your friends want to be where the party is. KICKER Marine subs make it happen, with 10 and 12-inch drivers made for sealed or ported enclosures. Completely weather-resistant, these 10 and 12-inch marine subs are real-world tested for salt/fog and UV exposure, meeting or exceeding ASTM standards for marine durability.

2) NEW ROCKFORD FOSGATE **R2D4-12** 12" 1000W 4-Ohm DVC Prime R2 Car Audio Subwoofer Power Handling (Max): 500 Watts per sub (1000 Watts per pair) Power Handling (RMS): 250 Watts per sub (500 Watts per pair) Features: 12-gauge compression terminals

10"/250mm Subwoofer Grille for Kenwood KFC-W2516PS 1 Grille Only. Subwoofer on the photo is not included.

300 Watts RMS 1300 Watts Max PP Cone Rubber Surround Steel Basket

Car Subwoofer Speaker / Diameter 178 mm / 7 Inch / 90 watt / Nominal Load 60 Watt / 88 dB / Impedance 2 x 4 Ohm

Inserts slugly into Gen-2 P3S trim rings. Protects against surround and cone damage. Sized to fit Gen-2 P3S woofers

Gehäusesubwoofer

100 watts RMS 300 Watts Maximum Impedance 4 Ohm 16.5 cm SPL 90db 1 W 140 mm, 42 mm/1 m frequency response: 35 Hz – 21 kHz EÖ: Woofer Tweeter et: 47 mm, 14 mm woofer tweeter

Car Subwoofer Speaker / Diameter 300 mm / 12 Inch / 300 watt / Nominal Load 150 Watt / Impedance 1 x 4 Ohm

Aluminum rear link plate 10-inch Front ABS / Steel reinforced port link Center link stabilizing dowels Alpine logo plate All hardware included

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Made for marine use: Life on the water can be hard on audio gear, with sun, spray, salt, and extreme temperatures, not to mention post-cruise washdowns and the occasional loose fish on the deck. This rugged JBL sub is ready for it all, with a one-piece polymer basket, marine-ready componentry, stainless steel mounting hardware, and a sealed, UV-resistant grille that will stand up to spray and sunlight for years to come. IPx5 Rated: Marine-grade materials & components to suit the demands of a harsh outdoor environment with an IPx5 marine rating Power handling: 200 watts RMS (600 watts peak power) / Sensitivity: 88 dB at 2.83 volts / Frequency response: 30-250 Hz / Impedance: 4 ohms Available …

Fully maximized Sealed motor structure UV resistant one-piece cast-polymer baskets Sealed magnet & rubber surrounds Polypropylene cone

1.Size: height 7.2* diameter of upper mouth 7.7* diameter of lower mouth 6.9cm, small size is easy to carry, does not take up space, convenient 2..Blue Light ; Ingenuity Design - when you open and lift the lid, the cup holder ashtray cool blue LED's light up automotive. The led illumination increases night vision and make sure that you can see the tray, keep the ash in your car ashtray, prevent ash flying. The inside of the ashtray consists of cigarette holder and no smoke station, which made of stainless steel, no rust and easy to clean. 3..Detachable ; Easy Clean Up Design - This cigarette cup is divided into two parts: the head and cup body. You can take off the cup by twisting it. It has …

Boxed Subwoofer / Diameter 200 mm / 8 Inch / 250 watt / Impedance 1 x 4 Ohm