Drill Bits

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. 1 x Bahco 9629-38 Flat Bit 38mm

Octagonal shank chisel with recessed end to accept toothed or plain edge scutches. Supplied with one replaceable comb scutch. Generally in accordance with BS3066 Contents: 1 x Scutch Holding Chisel, 25 x 200mm (Display Packed)

Stanley drill bits are designed to resist the impacts and fast drilling on concrete. The flute design removes the debris from the hole contribution for longer drill bit life. The hardened steel construction of the drill bit ensures exceptional strength, allowing it to withstand the toughest drilling applications. Whether you are working on soft or hard surfaces, its reinforced carbide tip provides maximum durability and longevity, ensuring consistent performance throughout projects. Features & Benefits • For drilling into house bricks and masonry • Shank diameter of drill bits 10-13mm is reduced to 9.5mm • Diameters larger than 13mm shank is reduced to 12.7mm • For use with …

These Faithfull chisels are suited to cutting bricks during building work. This chisel has a suitably hardened cutting edge, but should not be used on concrete containing reinforcing bars.

This spade bit has a 1/4-inch hex shank system and it is best for use with portable power drills. The Self-Cut Speed Spade Bit performs extremely fast hole drilling. Its self-feeding threaded tip enables the drill bit to effortlessly pull itself into the wood for high-speed drilling with little exertion. Fast chip removal for rapid results is made possible by the specially shaped spade. In product tests, this drill bit produces holes 10 times faster than a standard spade bit. It is suitable for use on soft and hard wood, light building materials and plasterboard. Total length 152 mm • Extremely Fast Holes • Self-Cut Speed Spade Bit performs extremely fast hole drilling • Self-feeding …

Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high quality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank. Contents: 1 x Draper Expert Flat Wood Bit, 38mm

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 Specifications Contents: 1 x Masonry Drill Bit, 15 x 150mm

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck. For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

The CYL-5 Drill Bit guarantees extra-long durability when drilling concrete and stone. The combination of a carbide blend developed in-house by Bosch and diamond-ground cutting edges makes the bit extremely wear-resistant. Friction on the flute from drilled material is notably reduced thanks to a 2-flute vario design with a short, variable incline providing good dust removal and wear reduction. The Bosch Power Grip Shank System enables 100% power transfer from machine to drill bit. This allows a direct use of power for drilling with no power loss and thus less wear. For use when drilling holes for fixings in concrete, natural and artificial stone. As proof of quality, the drill bit bears the …

The HEX-9 Ceramic Tile Drill Bit performs fast drilling in tiles. High-speed drilling is made possible by the 7-sided asymmetrical diamond-ground cutting edges, which efficiently slice through materials. The 2-flute U-shape design provides effective dust removal, which allows the drill to glide through the material quickly for fast results. This drill bit is intended for work in soft-to-medium density tiles, porcelain and ceramic. Only use this drill bit at low speeds and without the impact and hammer function. No cooling is required. It is compatible with impact drivers due to its hex-shank and it is suitable for use with standard drivers with chucks. Pack of 1 • Fast Drilling in Tiles …

14.0 x 150 x 210mm Drill Bit The Bosch SDS-Plus-3 14.0x150x210mm with entring tip and 4-flute design, Suitable for masonry and concrete. 4-flute design Rienforced core section 2-cutter

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

High quality metal twist drill bits for precise drilling in metal. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for a long service life. Very good concentricity. Tough viscous tempered bits ensure a particularly long service life. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Twist bit for metal applications • Hex shaft for very good power transfer • HSS = high speed steel with split point • Finely-tuned material elasticity for great durability • Very good concentricity Contents: 848 HSS Metal Twist Drill Bits, 6 x 50 mm

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Milwaukee Hex Shank Flat Drill Bit for fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard. Ideal for door locks, morticing, electrical and plumbing work. 1/4? Hex shank reception for direct insertion into the power tool or for secure chuck grip. Ground centre point for accurate positioning and sharp wings for improved cutting performance. Specifications • Cutting Width: 38mm • Length: 160mm • Pack Quantity: 1Features & Benefits• Fast drilling of big diameters • Suitable for drilling in natural hard and softwood and chipboard • Ideal for door locks, morticing, electrical and plumbing work • 1/4? Hex shank reception …

The solid carbide construction ensures exceptional hardness and wear resistance, making it perfect for drilling through tough materials like stainless steel, cast iron, and hardened metals. The TiN (Titanium Nitride) tip coating enhances the drill's cutting efficiency and longevity by reducing friction and heat buildup. This allows for faster drilling speeds and extended tool life. Designed with a jobber length, the Dormer R003 offers optimal balance between rigidity and reach, ensuring accurate and clean holes every time. Features & Benefits • Bright and TiN tip coating • Hard material solid carbide • 120° drill point • Cylindrical shank/straight shank • Standard …

The SDS plus-5 Drill Bit allows for effortless drilling. For smooth work, the carbide plate is grooved and bears notches that penetrate material more easily and prevent jamming in concrete. Drill guidance for easy starts without jarring or wandering is provided by the Activeteq centring tip, which keeps the drill in place for a precise hole diameter. Furthermore, AWB brazing and hardening technology reduces vibration during drilling to minimise strain on the user. The bit is intended for use on masonry and concrete. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill …

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 9mm • Total Length: …

Full length bevel edged blades manufactured from carbon steel hardened, tempered, finely ground and clear lacquer coated for corrosion protection. Impact - resistant polypropylene handles. All blades have blade guards. Contents: 1 x Bevel Edge Wood Chisel, 10mm

Superior quality SDS Plus drill bits suitable for a variety of applications. Drills are fully hardened and ground. Features & Benefits: • Superior quality SDS Plus drill bit suitable for a variety of applications. • Drills are fully hardened and ground. • Model No. SDS14X450 Specifications: Model No SDS14X450 Brand: Worksafe Size: Ø14 x 450mm

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Manufactured to DIN 8039. Zinc plated finish and packed individually. Size.10 mm x 400 mm.Additional Information:• Diameter: 10.0mm• Overall Length: 400mm• Pack Qty.: 1

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…