Welding Helmets

Outside Protection Plate Replacement Part

Auto-darkening LCD mask, for electrode welding; MIG/MAG; TIG and plasma. Solar cells power supply and lithium batteries for outstanding LCD filter lifeViewing area: 98x43 mmDarkening shade: DIN 9-13, externally adjustableUV/IR protectionLight to dark time: 1/25000 sDark to light time: 0.25-1sAdjustable darkening sensitivity and delayAuto on/offGrinding featureOptimized shape to make it easier to breathe with pulled-down screen

Replacement lithium-ion battery for use with the Air-Fed PAPR Auto-Darkening Welding Helmet (Stock No. 02518). Contents:1 x Battery for use with Welding Helmet - Stock No. 02518Replacement battery for use with the Air-Fed PAPR Auto-Darkening Welding Helmet (Stock No. 02518)SpecificationType: Lithium, rechargeableVoltage: 12VCapacity: 4,300mAhOperating time (on full charge): 8hCharging time (from flat): 2.5hCharging cycles: >500Dimensions: W 87 x H 63 x D 43mm

G40 is a combined welding and grinding helmet of which the G40 houses a passive mineral glass. The large plastic lens gives the welder and unobstructed field of view when the visor is flipped up The helmet is rated B in the impact resistance classification which means they are approved for grinding. Fix shade, Lens shade - Din 10 Large inner grinding visor (Clear)

External shading degree adjustment from DIN 9 according to DIN 13 and optical class 1/1/1/2. Delay and sensitivity can be adjusted from the inside Four arc sensors to increase the response rate of the filter, self-darkening Larger range and larger field of view with dimensions 100 x 50 mm (3.93 x 1.96 inches) for easy orientation in space ✅ The sensitivity setting is useful for low TIG/TIG welding by electricity. This allows a better filter response to darker the light of the arc With the delay setting, you can set the time interval during which the glass turns off the welding arc. A short delay speeds up work during the execution of staple connections, while a longer delay is useful when hi…

Outside Protection Plate Scratch Resistant Replacement Part Country of origin: Taiwan

Colour: transparent Product line: Welding Safety Easy to use

auto

Arc flash shield with helmet and chin protection. Shield thickness 1.5mm. Certified EN166,GS-ET-29. Part of the EV/Hybrid range.

Please read description before ordering.

The Clarke GWH8 Arc Activated Grinding/Welding Headshield provides a clear view when not welding but instantly changes to required shade or filter when the arc is struck. Suitable for Arc, MIG and TIG welding. This Clarke Welding Headshield provides eye protection to EN379 standards.

Colour: multi-coloured Package dimensions: 15 x 10 x 5 cm Gasket shaft seal for speed glass Quality product