125 mm cutting discs

Bosch Expert Multi Material Diamond 125mm 2.2mm 22mm 26089006

Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …

from £50.95

Bosch Expert Multi Material X Lock Diamond 125mm 2.4mm 22mm 2

Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …

from £39.56 up to £50.95

Bosch Professional X-lock Pipe 125 Mm Diamond Cut Disc 2608901391

from £63.49

Bosch Expert Carbide Multi 125mm Pack of 1 2608901189

Bevels tubes as they cut and lasts longer than conventional cutting wheels.Features:- Long-lasting tube cutting and beveling- Specialized disc that bevels tubes as you cut- Advanced steel body maintai more→ns constant speed and depth- Does not splinter, does not smell like chemicals, has no expiration dateSpecifications:- Diameter mm: 125- Hole diameter mm: 22,23- Cutting width mm: 2.8- Segment height mm: 3.2- X-Lock: Yes

from £13.95 up to £17.95

Bosch Professional X-lock Expert Carbide Multi Wheel: 125x22.23 Mm Wood Cu

Cuts materials that angle grinders previously couldn’t - Professionals value angle grinders for their ability to cut tough materials like concrete, stone and metal. With the EXPERT Carbide Multi Wheel more→this wonderful tool can be even more versatile, efficiently cutting all kinds of softer materials such as wood, plastic and modern composites. The EXPERT Carbide Multi Wheel uses sharp carbide grits on its rim to cut multiple materials extremely effectively. The grits are joined to a steel body by a laser technique for an extra strong bond, giving a safe and reliable cutting disc that maintains a constant speed and depth throughout a long lifespan. With the EXPERT Carbide Multi Wheel, your angle gr…

from £117.99

Bosch Expert X Lock Carbide Multi 125mm Pack of 1 2608901193

Professionals Value Angle Grinders For Their Ability To Cut Tough Materials Like Concrete, Stone And Metal. With The Expert Carbide Multi Wheel This Wonderful Tool Can Be Even More Versatile, Efficien more→tly Cutting All Kinds Of Softer Materials Such As Wood, Plastic And Modern Composites. With The Expert Carbide Multi Wheel, Your Angle Grinder Becomes Even More Versatile. For Many Tradesmen, It May Be The Only Power Tool They Need.Features:- Exceptional Durability Is Built In With Bosch Carbide Technology.- Advanced Steel Body Keeps Constant Speed And Depth.- Extra Strong Laser Bonding Of Carbide Grit And Steel Body.- Long Life Cutting Multiple Materials- Click It On With X-Lock – The Fastest Ac…

from £12.95 up to £15.59

Compare prices₇→

Bosch Standard for Universal 125 mm (2608615059)

from £10.99 up to £18.08

Compare prices₃→

Diamond Cutter / Concrete / Quantity 1 Piece / Disc Diameter 125 mm / Disc Thickness 2 mm / Bore 22.23 mm

Bosch Expert X Lock Diamond Metal 125mm 1mm 22mm 2608900533

from £19.95 up to £20.99

Lenox MetalMax Diamond Metal 125mm 2030866

Lasts up to 100x longer than a bonded cutting disc - Cutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical sme more→ll of bonded discs burning away while they cut. With the EXPERT Diamond Metal Wheel, this smell can be consigned to the past – as can regular trips to a shop to buy new metal discs. The EXPERT Diamond Metal Wheel uses Bosch Diamond Technology, which means optimum quality diamond grits fixed to a steel body. This super-hard edge lasts many times longer than even the best bonded discs and can cut a wide variety of ferrous and non-ferrous metals with ease. It doesn’t shatter if dropped, produces no c…

from £10.50 up to £20.95

Compare prices₄→

Lenox MetalMax is a new alternative to abrasive cut-off discs. Its breakthrough diamond technology delivers extreme durability to help you maximise work efficiencies and reduce costs in your metal cut more→ting jobs. MetalMax blades are recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminium and non-ferrous metals. Designed for use in the same power tools as bonded abrasive discs, at the same RPMs and feed forces, MetalMax blades can be used without having to change any operating settings. Specifications • Diameter: 125mm • Thickness: 1.3mm • Arbor: 22.23mm

Makita A41 Flat Metal 125mm D-18677

from £1.49

Makita Diamak Turbo Rim Diamond 125mm D-61167

A flat metal cutting disc which is ideal for working on steel. Part of a range of Makita reinforced abrasive cutting and grinding discs which are suitable for use with grinders and disc cutters. Speci more→fications • Model No: D-18667 (replaces A-85313) • Diameter: 125mm • Thickness: 2.5mm • Bore: 22.2mm • Quantity: 1 Note generic image is shown for illustration purposes. Please refer to the description for the specifications of the item you will be purchasing Features and Benefits • Flat centre cutting disc • Ideal for cutting steel

from £9.95

Makita X Lock A60T Metal 125mm 1.2mm 22mm E-00418

The Turbo Rim design enhances cutting speed and efficiency, reducing vibration and providing a smoother, cleaner cut. Its advanced diamond technology ensures extended tool life and superior cutting po more→wer, making it perfect for heavy-duty applications. Compatible with standard angle grinders and saws, the Makita Diamak Turbo Rim is built for reliable performance and versatility. Features & Benefits • Ideal for concrete Specifications • Diameter: 125mm • Bore Size: 22.23mm • Quantity: 1

from £3.49 up to £4.95

Makita Pro Thin for Stainless Steel 125mm Pack of 10 B-12239

The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock cutting discs can be used in standard angle grinders as well as X Lock machines. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in …

from £14.99

Makita X Lock Tungsten Carbide Grit 125mm 2mm 22mm E-11776

These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting more→wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 125mm • Thickness: 1.2mm • Bore: 22.23mm Contents • 10 Discs

from £26.95

Marcrist BF850 AkkuMAX Turbo Diamond Blade 125mm 22mm 1851.0125.22

These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for sa more→fe and easy disc installation and removal. Specifications • Diameter: 125 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 • TC Grit: 30/40 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal

from £31.95

Compare prices₄→

The Marcrist BF850 AkkuMAX Turbo Diamond Blade is a high-performance cutting solution specifically designed for use with cordless power tools. Featuring advanced diamond segment technology, this blade more→delivers exceptional cutting speed and durability. The BF850 is engineered with a turbo rim design that enhances cutting performance, ensuring smooth, fast cuts through a variety of materials, including concrete, stone, and masonry. Its optimised segment structure reduces friction and heat buildup, allowing for longer runtimes and extended blade life, even when used with battery-powered tools. Suitable For • General Purpose • Masonry • Concrete • Facing Bricks • Dry Wall …

RUBI superpro r31933 S7914543

from £21.99 up to £63.84

Compare prices₃→

If you like to take care of every detail in your home and own the latest products that will make your life easier, purchase Cutting disc RUBI superpro r31933 at the best price.. Colour: Silver

Bosch Professional 125 Mm Velcro Sanding Plate Grinder 2608601077

from £14.49

Bosch 125x1 Mm Cube Of Standard Metal Discs 100 Units 061599765G

The BOSCH PROFESSIONAL 125 mm Velcro Sanding Plate Grinder Black is a high-quality electric tool designed for efficient and precise sanding and grinding applications. This grinder features a 125 mm Ve more→lcro sanding plate, which ensures quick and secure attachment of sanding discs for smooth and consistent sanding results.The grinder is powered by a powerful motor that delivers exceptional performance, allowing users to tackle tough sanding and grinding tasks with ease. The motor is designed to run smoothly and quietly, minimizing vibrations and reducing user fatigue during prolonged use.This electric tool is also equipped with a cutting disc feature, making it versatile for various applications.…

from £36.99

Bosch Professional 125x2.2x3 Mm Diamond Disc Marble 2608602690

125x1 mm cube of standard metal discs 100 units.Electric tool accessories.Discs.ROBERT BOSCH SPAIN SL.

from £36.49

Bosch 2608602202 Standard For Ceramic Diamond 125mm

Best For Marble Diamond Cutting Disc Provides Clean Cuts In All Sorts Of Marble And Plastic Material.Features:- Thin And Even Layer Of Diamonds Is Electroplated To Steel Body To Ensure Neat Results- D more→eep Cutting Segments Are Equipped With High-Quality Cutting Edges That Grind Through Material, Producing Spotless Work- With 22.23 Mm Bore For Standard Locking Nut Angle Grinders.Specifications:Material:- Diameter Mm: 125- Bore Diameter Mm: 22.23- Cutting Width Mm: 2.2- Segment Height Mm: 3

from £8.47 up to £11.95

Bosch 2608603255 Standard for Inox Rapido Discs 125mm (Box of 10)

Bosch 2608602202 Standard For Ceramic Diamond Cutting Disc 125mmThe Bosch 2608602202 Diamond Cutting Disc is designed for use on ceramic and tile. It has a 125mm diameter and gives a 1.6mm cutting wi more→dth. It gives exact accurate cutting results in all types of tile thanks to its continuous cutting rim.Features:
- To be used with an angle grinder or circular saw
- This diamond cutting disc is suitable for cutting ceramics, porcelain, tile and fine stonewareSpecification:
- Diameter: 125mm

- Bore diameter: 22.23mm

- Cutting width: 1.6mm

- Segment height: 7mm

from £9.48 up to £16.95

Bosch Professional Best Universal Turbo 125x22.23x5 Mm Diamond Cut Disc 26

Bosch 2608603255 Standard for Inox Rapido Straight Cutting Discs 125mm (Box of 10) The Bosch 2608603255 is a pack of 10, WA 60 T BF Standard for Inox Cutting Discs measuring 125mm in diameter in a tin more→. The disc is made of aluminium oxide specifically designed for use with Inox. It is free of ferrous, sulphurous and chlorinated fillers. Use this disc for cutting Inox. It is compatible with Bosch angle grinders. Features:
- An aluminium oxide disc specifically designed for use on Inox
- Free of ferrous, sulphurous and chlorinated fillers
- The Standard for Inox Cutting Disc is a reliable choice for working on Inox
- Bosch cutting discs comply with the maximum safety requirements, such …

from £95.99

Bosch A30S BF Depressed Centre Metal 125mm 2608600221

Best For Universal Turbo Diamond Grinding HeadFeatures:Best For Universal Turbo Diamond Grinding Head Grinds Fine Surfaces From Granite To Concrete:- Turbo-Shaped Segment Provides Great Performance, P more→roviding The First Step In Polishing Applications- High-Class Mixture Of Diamonds Offers High Robustness And Wear Resistance- With 22.23 Mm Bore For Concrete Grinders And Angle Grinders With Locking Nut.- Bosch´s Dynamic Counter-Balancing Results In Vibration-Free Work, Which Also Protects The Power Tool.- It Is Suitable For Use With Concrete Grinders.Specifications:- Unbalance, Max. G*Mm: 50- Diameter Mm: 125- Bore Diameter Mm: 22.23- Segment Height Mm: 5.0

from £1.95