125 mm cutting discs

Bosch X Lock Medium Backing Pad 125mm 2608601715

The Tiles Used In Modern Construction Are Often Large, Very Hard And Expensive. Cutting Them To A High Standard Every Time Is Therefore Crucial Yet Difficult. The Expert Hardceramic Tile-Cutting Disc more→Uses Diamond Technology And A Range Of Design Features To Deliver The Best Results Consistently, Even In The Hardest Ceramics. The Bosch Expert Hardceramic X-Lock Diamond Tile Cutting Disc Offers The Best Cut In Hard Tiles. You Can Be Confident Of Achieving A Professional Finish On Every Job With This Diamond Cutting Disc.Features: - Clean, High Quality Cutting With Bosch Diamond Technology.- Chip-Free Cut With Purpose-Designed Continuous Rim.- Efficient Thin Blade Cuts Smoothly And Stays Cool.- …

from £10.49 up to £15.49

Bosch Professional X-lock Pipe 125 Mm Diamond Cut Disc Silver 2608901391

The X-LOCK Backing Pad Medium is ideal for medium grit sanding (P80). It features a rigid multi-rib construction that maximises contact pressure between disc and workpiece, enabling fast work results. more→The ribs increase contact pressure and allow for a cooling air flow between disc and backing pad. Manufactured from thermostable plastic, it resists high temperatures and breakage. Use this pad for X-LOCK fibre sanding discs with grit size P80. Changing backing pads is fast and convenient thanks to the keyless X-LOCK system. It is suitable for use with X-LOCK angle grinders. X-LOCK Backing Pad Medium Ideal for medium grit sanding P36 to P60 Extended lifetime thanks to ventilation ribs for cooling …

from £66.99

Compare prices₂→

Bevels tubes as they cut and lasts longer than conventional cutting wheels.Features:- Long-lasting tube cutting and beveling- Specialized disc that bevels tubes as you cut- Advanced steel body maintai more→ns constant speed and depth- Does not splinter, does not smell like chemicals, has no expiration dateSpecifications:- Diameter mm: 125- Hole diameter mm: 22,23- Cutting width mm: 2.8- Segment height mm: 3.2- X-Lock: Yes

DeWALT Extreme Diamond Metal 125mm DT40252

from £15.89 up to £15.95

Compare prices₅→

DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, a more→luminium and non-ferrous metals. Specifications • Diameter: 125 mm • Thickness: 1.3 mm • Bore Size: 22.23 mmFeatures & Benefits• Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in airborne …

DeWALT Extreme Runtime Flap Disc 125mm 125mm 40g Pack of 1 DT99583

from £8.95

DeWALT INOX Thin Stainless Steel 125mm DT42340TZ

DeWalt's Extreme Runtime series of accessories were designed in conjunction with the Flexvolt range and have been optimised for use with cordless power tools.

from £10.12 up to £11.95

Compare prices₅→

DeWalt thin fast cutting discs for stainless steel. Supplied in storage tin. Specifications • Pack Qty: 10 • Applications: Cutting • Material: INOX • Type: 1Features & Benefits&bul more→l; Aluminum oxide grains • Reinforced fibreglass backing • High quality resin bond • Fast cut • Designed for stainless steelContents• 10 Discs (125mm) • Metal Storage Tin

DeWALT Laser Welded Diamond 125mm DT3761

from £17.95

DeWALT Thin Stainless Steel 125mm Pack of 10 DT43922

DeWalt's Laser welded Diamond Cutting Disc is manufactured using advanced bond technology which increases blade productivity and operating life. The blade has a layer of pre-alloyed metal which enclos more→es the diamond creating a pellet that is held more securely and distributed better within the segment. Specifications • Diameter: 125mm • Bore: 22.2mm • Thickness: 2mm • Performance: Extreme • Applications: Cutting Features & Benefits• Pre-alloyed metal layer • Laser welded segments • High quality, low carbon steel core • For use with corded and cordless angle grinders

from £13.95

Draper Metal , 125 x 1 x 22.23mm

High performance bonded discs for general metal cutting work on stainless steel, ferrous and non ferrous metals. Suitable for use with corded or cordless machines. Specifications • Partcode: DT43 more→922 • Type: Thin Cutting Disc for INOX • Diameter: 125mm • Thickness: 1.2mm • Bore: 22.3mmContents• 10 Discs • Storage Tin

from £0.95 up to £1.48

Draper Zirconium Oxide Flap Disc, 125mm, 80 Grit

Flat cutting disc designed for fast straight cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which h more→as been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.

from £2.49 up to £3.84

Faithfull Metal Cut Off Disc 125mm 3.2mm 22mm FAI1253M

Expert Quality, Zirconium Oxide tapered flap discs, ideal for grinding and finishing ferrous or non-ferrous metals. Manufactured from fibre backed abrasive sheet, which is securely fixed to a reinforc more→ed backing disc with a chrome plated metal centre with a 22.2mm bore. Achieves a longer life when compared to resin fibre discs.

from £1.49

Faithfull Depressed Centre Metal Cut Off Disc 125mm 3.2mm 22mm FAI1253MDC

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thi more→ckness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's …

from £1.49

Faithfull Depressed Centre Metal Grinding Disc 125mm 6.5mm 22mm FAI1256MDG

Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …

from £1.49

Faithfull Zirconia Abrasive Jumbo Flap Disc 125mm 40g Pack of 1 FAIFD12540

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …

from £5.49

Faithfull Zirconia Abrasive Jumbo Flap Disc 125mm 120g Pack of 1 FAIFD1251

The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia A more→lumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc ZA40 125mm. 40 grit is suitable for rough grinding. The slightly conical shape is ideal for grinding at 15–25-degree angles on contoured surfaces. For use with a 125mm angle grinder. Max. Speed: 80m/s 12,200 RPM.Additional Information:• …

from £5.49

Faithfull Zirconia Abrasive Jumbo Flap Disc 125mm 80g Pack of 1 FAIFD12580

The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia A more→lumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc ZA120 125mm. 120 grit is suitable for smooth grinding. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces. For use with a 125mm angle grinder. Max. Speed: 80m/s 12,200 RPM.Additional Information:• …

from £5.49

Faithfull Aluminium Oxide Abrasive Flap Disc 125mm 120g Pack of 1 FAIFD125

The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia A more→lumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc ZA80 125mm. 80 grit is suitable for final grinding. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces. For use with a 125mm angle grinder. Max. Speed: 80m/s 12,200 RPM.Additional Information:• …

from £1.95

Faithfull Aluminium Oxide Abrasive Flap Disc 125mm 40g Pack of 1 FAIFD125A

The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasive discs, with less vibration and reduced glazing. Benefitting from a longer life (30 x longer than fibre discs) and self-sharpening flaps, resulting in fewer disc changes. The slightly conical shape is ideal for grinding at 15-25 degree angles on contoured surfaces. For use with angle grinders.This Faithfull …

from £1.95

Faithfull Aluminium Oxide Abrasive Flap Disc 125mm 80g Pack of 1 FAIFD125A

from £1.95

Faithfull Professional Diamond 125mm RA3012522

from £11.95

Faithfull Stone 125mm 3.2mm 22mm FAI1253S

The Faithfull Professional Trade Level Diamond Blade with 10mm sintered segments allowing for a longer working life and less blade changes. The aerated core allows for better cutting performance and a more→ids cooling. Ideal for cutting materials of medium hardness commonly found on the worksite such as class B engineering bricks, concrete kerbs, concrete lintels and beams, reinforced concrete, building blocks, roofing tiles, 30-60 newton block paviours, York stone, concrete pipes and other less abrasive materials.Blade Diameter: 125mm.Bore Size: 22.2mm.Segment Height: 10mm.Additional Information:• Diameter: 125mm• Bore: 22.2mm

from £1.49

Faithfull Turbo Cut Diamond 125mm GPT12522

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Stone Cut Off Disc …

from £17.95 up to £24.99

Faithfull Zirconium Abrasive Flap Disc 125mm Coarse FD127C

The Faithfull Turbo Cut Diamond Blade has been designed to offer excellent performance levels and a faster cut than standard sintered segmented blades. Perfect for a wide range of materials, this blad more→e excels in very hard materials such as hard concrete, class A engineering bricks, 65-100 Newton clay paviours, hard flint aggregates, reinforced concrete lintels, kerbs, hard concrete paving slabs, some clay products, granite and hard slate.Blade Diameter: 125mmBore Size: 22.2mmSegment Height: 10mm.Additional Information:• Diameter: 125mm• Bore: 22.2mm

from £5.95