Car Pumps & Compressors

Composite body and dial type gauge with rubber protector. Calibrated in bar/psi. Fitted with 500mm rubber hose and a twin push-on connector.Tyre Inflator with Twin Push-On Connector• Composite body and dial type gauge with rubber protector.• Range: 0-10bar/0-145psi.• Fitted with 500mm rubber hose and a twin push-on connector. • Model No. SA9312Model No: SA9312:Brand: Sealey:Inlet Size: 1/4BSP:Maximum Air Supply: 12bar(175psi):Minimum Air Supply: 145psi:Nett Weight: 0.57kg:Range: 0-10bar(0-145psi):PTDSEASA9312

Specifications: Condition: Brand New Material: Plastic ABS Size: 14*20*7cm Working voltage: DC 12V Maximum Current: 10 A Max air pressure: 150PSI Power Cord Length: 3Meters Hose Length: 50cm Continuous Working Time: 10 Mins Features: Easy to operate when you need inflate the tire or sport ball. High quality construction. Built in Pressure Gauge. Convenience 12V cigarette lighter plug power source which means you can inflate your tires on road. Automation and Rapid Performance: Its maximum air flow is 35L/min, can fully inflate each wheel  within 5-6 minutes very fast and automatically shuts off when the set psi is reached. 3 Units Reading: PSI/BAR/KPA unit displays for

This double foot pump is gauge-calibrated to 0-7 bar and 0-100 psi and fitted with an easy to read dial gauge. The all steel construction provides added strength, and the barrel is pressure-sealed. It has a sturdy anti-slip pedal and rubber feet, and is supplied with adaptors for airbeds, cycle valves and football. Features and Benefits Constructed from high strength steel for overall product longevity Has been barrel pressure sealed to prevent any leakage Boasts and anti-corrosive finish Anti-slip rubber pedal to ensure optimum grip when pumping up your desired object Typical Applications Ideal for use when inflating footballs, airbeds and bicycles Notes Supplied with adaptors to allow you …

Voltage : 12V Material Type : Copper Motor + ABS Body Item Diameter : 0 Item Weight : 0.5 Item Height : 6 Item Width : 14 Item Length : 21 Model Name : Small wireless handheld air pump Origin : Mainland China Item Type : Pumps label：yes

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose. 90° Angled connector for the difficult to reach valves.6mm Bore 90° Angled Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose.• 90° Angled connector for the difficult to reach valves.• Model No. PCL6ATModel

Material: Zinc alloy Color: As the picture Size: One Size Length: 5.5cm Package Included: 1PC Kindly Tips: 1. Please allow 1cm differs due to manual measurement. Please compare the detailed size with yours before you buy. 2. The color of the actual items may slightly vary from the above images due to different computer screen, thanks for your understanding. ,The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws. ,The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and

Wheel Hub Cleaning Tool 160mm 1/2"D by Zoro Select

This 12V analogue tyre inflator is designed primarily for the rapid inflation of car bicycle motorcycle and small commercial vehicle tyres. It’s also supplied with a range of adaptors (three) to make it suitable for the inflation of balls toys and other inflatable products. It features a built-in LED worklight and has a three metre power cord with 12V power plug and includes a spare fuse. Dial readings are in psi/bar and the inflator has built-in compartments for the power cord air hose and accessories.PTDDRPDIR13274

Very glad to see you in my shop. Specifications: Type item: Tire inflation valve connector Material: copper + zinc alloy Product size: 52*50mm Thread diameter: approx. 8mm0.31" Color: as shown Specification: can be deflated Scope of application: American tire orifice Product Description: 1. Full metal structure 90 degree lock tire inflation chuck, suitable for bicycle, motorcycle, automobile tire nozzle. 2. The inflatable nozzle can be inflated to the American tire nozzle quickly, quickly connect the tire nozzle, no air leakage. 3. Easy to operate and suitable for most of the vehicle air charging pump. 4. The external thread is the same as American tire nozzles, suitable

Pressure is reduced to operating pressure Condensation water is filtered out Filter pressure regulators extend the advantages of the pressure regulator through semi-automatic drainage Pressure gauge for operating pressure settings International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Correctly inflated tyres can result in improved fuel efficiency. This Air Compressor is recommended for use on cars, 4x4s, vans, motorcycles, bicycles and many other inflatable items.

Description: The air pump that even girls can also use can pump up in time. The metal cylinder is 30 cylinders. It just takes 30s for fast replenishment and will stop when full. Strong power quickly increases the air inflation speed, let the air inflation enter the speed-up era. Metal cylinder has stable and fast heat dissipation, reducing the air pump's heat during use, while reducing noise. Stable current does not hurt the car. Pure copper coil motor can improve performance, reduce energy consumption and make the air pump safer. The length of this product is 14cm, the width is 20cm and the height is 6.5cm. It is suitable for car. For household vehicles, it is recommended that the tire

The air pump uses pure copper coil motor and whole metal cylinder block, support quick inflation and tire pressure detection, digital display with high brightness lamp. Features: Pure copper coil motor, strong energy, lowe consumption, small noise. Tire pressure detection, just plug the inflation nozzle into tire valve and press it to display current tire pressure. Concealed storage of cable, say goodbye to the messy. Automatically stop, press to start, no need to watch it. Whole metal cylinder block, quick heat dissipation, long service life. High brightness lamp, strong lighting effect, long-lasting illumination. Digital display, night vision, easy to operate and view. Specifications: Material: …

Style: wired pointer, lighter style, USB charging style Specifications: Material: ABS Host weight: 500G Voltage: 7.4v/DC12v Current: 10A Power: 120w Battery capacity: 2000mAh Function: inflation/lighting/automatic charging and stopping Air pressure flow rate: 35L/min Size: 132 * 53 * 203mm Wireless power cord length: 1 meter Cable power cord length: 3 meters Inflation tube length: approximately 45cm Cylinder specification: 19 cylinders Features: 1. Blue backlit digital large screen, convenient for users to set preset pressure. When the tire pressure reaches the preset pressure, the car tire pump will automatically stop working. 2. Turn on the car tire pump, connect the pump to the nozzle,

Item Name:Car Air Pump Material:ABS,Electronic Component Features:Quick Inflation, Low Noise, Multi-protection Type C Battery Capacity:6000mAh(Included) Air Flow:About 20L/Min Amperage:6A Output Power:120W Rated Voltage:DC12V Size Available: Measurement in CM Product Size:17cm x 13.5cm x 7cm/6.69 x 5.31 x 2.76 (Approx.) Power Cord Length:300cm/118.11 (Approx.) Inflatable Tube Length:50cm/19.69 (Approx.) Description: Brand New & High quality. A high-quality intelligent chip is used in this inflatable pump, which features overload protection, short circuit and power failure protection as well as stable output and long life.This inflatable pump is equipped with an inflatable tube reinforced by …

Features: 1.With its own lighting, easy to use: LED lighting, to help you operate freely in the night 2.Static and mechanical compartment, safe and durable: small body with excellent heat dissipation, shock pad to resolve the working vibration of the cylinder, more comfortable for hand-held operation. 18650 power lithium battery, high power supply, excellent endurance 3.Precise inflation: let technology integrate into sports to inflate the ball, without needing to press and check repeatedly. Precisely inflate once to the right pressure to help you enjoy your passion and sweat on the court. 4.Universal interface, with no worries: Micro USB charging interface, compatible with most smart phone …

High-pressure hand pump with pressure gauge.This hand pump comes standard with all Talamex SUPs.Anti-sand cover gasket.Alloy shaft.Capacity 2200cc.Max pressure 1,8bar/27,5PSI.With bayonet adapter.Dimensions 8cm x 22cm x 60cm.Weight 1,1kg.Functions inflate.

Description: Featuring a compact and portable design, this inflator pump is easy to carry around, so you can refill it whenever and wherever you want. Besides, it is designed with digital display for easy reading of data. Designed with a LED light, this car inflator is easy for you to use at night. Besides, with its full self-stop design, it is very safe and you can use it with confidence. It is made of high-quality plastic and metal material. The length of this product is 16cm, the width is 15.2cm and the height is 7cm. This product is suitable for tire inflation and other items that need to be inflated to inflate. Item Name: Car Air Pump Material: Plastic, Metal Features: