Car Pumps & Compressors

Maximum pressure up to 110 psi. Designed for inflating all type of bicycle tires with the ability to top up a car tire pressure from 26 psi to 36 psi. Maximum running time up to 15 mins at the optimum pressure range 30 to 55 psi Equipped with a bright LED light that allows you to working in dark environments. Noise level around 72 dB, similar to vacuum cleaner or hair dryer. It is relatively quieter when compare with other compressors in the market. High-capacity 2200mAh built-in rechargeable Li-ion battery, last longer after one charge.

The KOHALA foot pump is a convenient and efficient way to inflate your surfing equipment, such as paddleboards or inflatable kayaks. With its sleek design and sturdy construction, this foot pump is designed to make the inflation process quick and easy. Simply place your foot on the pedal and use your body weight to quickly pump air into your equipment.Whether you're heading out for a day of surfing or exploring the waters on a kayak, the KOHALA foot pump is a must-have accessory for any water sports enthusiast. Its compact size makes it easy to transport and store, allowing you to take it with you on all of your aquatic adventures.Say goodbye to struggling with hand pumps or bulky electric pumps …

Heavy-duty extruded aluminium body and zinc head. Linear pressure scale in psi and bar. Fitted with 0.5m rubber hose with steel protection sleeve and clip-on air connector.Tyre Inflator with Clip-On Connector• Heavy-duty extruded aluminium body and zinc head. • Linear pressure scale in psi and bar. • 0.5m Rubber hose with steel protection sleeve. • Range: 0-9.6bar(0-140psi). • Fitted with clip-on connector.• Hose Length: 350mm.• Model No. SA395Model No: SA395:Brand: Sealey:Inlet Size: 1/4BSP:Maximum Air Supply: 13.8bar(200psi):Minimum Air Supply: 6.9bar(100psi):Nett Weight: 1.01kg:Range: 0-9.6bar(0-140psi):PTDSEASA395

3/8" x 1/4" Reducing Bush Male - Female by Carborundum

A patented double-flow SAFE pump with air gauge for the inflation of the inflatable sup boards , with the possibility of inflating up to pressure 26psi. The pump has a slightly elongated shape , is very robust and has the aluminum shaft , these characteristics make it suitable to inflate a table in 4/5 minutes of time allowing a minimum of effort. CAPACITY_ 1.8+1.8L, max. pressure 26psi as DIN EN 16051 CHARACTERISTICS_ seals and anti-sand filter for long life of pump and sup board, high-airflow piston for an easier inflation, switch tap for double/single action.Specifications:- Dimention: 8 x 22 cm- Capacity: 500 ml- Material: Stainless steel

Quickly pump up flocks, airbeds, inflatable furniture, and other smaller items with the high power, rechargable Outwell Air Mass Pump.With a 12v and 230V input, this compact pump is ideal for camping trips.Not suitable for tent inflation.FEATURES:Powerful and compact.Rechargeable.Suitable for 12V and 230V.For inflating and deflating.Supplied with 3 different nozzles.Ergonomic design.Batteries:1000 mAh NI-MH battery.

Not available.

Spray gun with gravity cup metal Spray brush with suction cup in metal design Tyre inflator with pressure gauge reading in bar and psi 4 m spiral air hose with quick coupling

34021904 Double Tubingclip by Norgren

Fast Inflation: HOTO electric air compressor use 19mm large cylinder and high-power magneto enable super-fast inflation. With maximum pressure 150PSI. It can air up a car flat tyre in 8.5mins or a mountain bike flat tyre in just 129s. 5 Modes: With 4+1 modes, air pump can inflate cars, motorcycles, bikes, balls or manual control. Enabled by 0.1bar accurate digital tyre pressure measuring technique, it will auto-stop when reaching preset value, thus avoiding overinflation. USB-C Charging: The built-in 2500mAh capacity 7.2V battery allow for inflating 2.5 tyres if fully charged. The standard Type-C charging port is compatible with the charging cable of other smart devices, allowing for charging …

QSL-1/4-6 6mm OD-1/4" BSPT Swivelmale Stud Elbow Festo by Festo

TRUSTED: Suitable for all makes and models, the ResQ Inflator provides powerful and reliable tyre inflation for when needed. AirMan products are made to the highest OEM standards and approved by leading vehicle manufacturers SIMPLE: Our compressor uses a high quality, workshop specification analogue gauge to give accurate readings. No fancy digital gauges to go wrong or misread, just simple no-nonsense readings every time. CONVENIENT: Supplied with a compact case, the ResQ weighs only 855g and measures a small 150 x 140 x 61mm to fit in glove boxes, under seats or in the boot. The long power cable measures 3 meters long to provide access to all tyres EASY TO USE: Simply plug in the 12v connector,…

Pistol-grip tyre inflator fitted with a clip-on connector that's compatible with most vehicles including; cars commercial vehicles motorbikes and trailers. The easy to read 65mm analogue gauge is attached with a heavy-duty rubber cover for increased protection. Maximum inflation pressure 12 bar (170psi). Supplied with a 1/4 BSP male adaptor.PTDDRPDIR91273"

Manufactured to comply with EN 12645. Aluminium body with rubber bumper. Linear pressure scale dual calibrated in psi and bar with parallax correction. 0.5m Flexible hose fitted with 240mm twin push-on air connector.Tyre Inflator with 0.5m Hose & Twin Push-On Connector• Manufactured to comply with EN 12645.• Aluminium body with rubber bumper.• Linear pressure scale dual calibrated in psi and bar with parallax correction.• 0.5m Flexible hose fitted with 240mm twin push-on air connector.• Range: 0-9.5bar(0-138psi).• Model No. SA371Model No: SA371:Brand: Sealey:Inlet Size: 1/4BSP:Maximum Air Supply: 15bar(218psi):Minimum Air Supply: 5.5bar(80psi):Nett Weight: 1.15kg:Range:

These Twin Hold-on Connectors are suitable for inflation of twin tyres. A Closed End connector is used when air is supplied directly from a main air line (i.e. compressor or air receiver). A non-return valve unseats on connection to the tyre's valve allowing air to flow into the tyre. The handles on these connectors are red in colour. Twin Hold-on Connector. Inlet size Rp 1/4.