Drill Bits

The Dormer R510 Solid Carbide Tin CDX Jobber Drill is a high-performance tool designed for precision drilling in tough materials. Constructed from solid carbide, this drill offers exceptional hardness and durability, making it ideal for cutting through hardened steel, cast iron, and stainless steel with ease. The Titanium Nitride coating further enhances its wear resistance, reducing friction and heat buildup for longer tool life and superior performance. Engineered for efficiency, the R510 features a unique point geometry that ensures precise, clean cuts and optimal chip evacuation. This design minimises the risk of tool breakage and increases drilling accuracy, making it perfect for demanding …

The Marcrist PC850 Universal Diamond Core Bit offers lightning fast drilling, without breakout, and without the need for special machinery. Material from common brickwork to hard concrete can now be drilled dry. Ideal for everyday use by plumbing, heating and electrical specialists.

High performance, unrivalled drilling system. They drill the hardest of tiles with ease; leave clean precise holes in any tile however hard, with any drill, even cordless. Broken tiles are a thing of the past, along with the need for expensive specialist drills. Test the tile drills the trade has been waiting for.Features:- Extreme speed- Universal- Extreme long life- Lowest cost per hole drilled- For professional everyday useMaterial:- All Tiles However Hard- Natural StoneSpecifications:Diameter - 15mm

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

This bench-mounted compact drill bit sharpener offers a quick, simple and effective way to sharpen drill bits. It is capable of sharpening points to a 118° angle to help make drilling with the bit easier. Suitable for 3–13mm drill bits made from HSS titanium, cobalt, carbon steel and split point bits.

Makita's Nemesis II SDS Plus drill bits are PGM Sichersafe certified, with centering tips and symmetrical 4-cutter heads. Drilling into reinforced concrete is no longer a hit and miss application, reinforcing bar being no obstacle for the Nemesis drill. Also perfect for use in the hardest of natural stone. Nemisis II drill bits have a wear mark on the head that highlights any compromise in PGM certified drilling accuracy. As long as the wear mark is still visible, the drill bit is suitable for making anchor holes. Its unique symmetrical head geometry ensures precision drill holes. Perfect for critical anchor fixings and where spot drilling is required. The Nemesis will drill up to 50% more holes …

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Features & Benefits • The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry delivers maximum hole concentricity for better fixing retention • Optimised four flute design allows …

DeWalt Extreme SDS Plus hollow drill bits have an Airlock compatible dust extraction port built into them which is simply connected to an external dust extractor to suck out the drilling dust while the bit is in use. Compared to some alternative dust extraction solutions this frees up weight on the tool for reduced fatigue and can be easily swapped between machines as required. Integrated dust extraction helps prevent workers from being exposed to harmful dusts and saves time required for cleaning out holes as the dust is simply sucked away whilst the hole is drilled. Specifications • Diameter: 14mm

These ultra-sharp bevel edge chisels come pre-sharpened ready for use and are 50% stronger than the previous Stanley DynaGrip chisels The 2-16-269 is a 5 piece bevel edge chisel set from Stanley. These Thru Tang Chisels are 50% stronger than the previous Stanley DynaGrip chisels thanks to their new design and blades which are made from quality chrome alloy steel. Their ergonomic soft-grip handles ensure maximum comfort upon use and lacquered coating prevents rusting. Designed for intensive use. Features:
- 50% stronger than old DynaGrip Pro Chisel on handle side impact test
- Superior Thru Tang design - 50% stronger handle for extra reassurance and durability
- Steel strike cap - can …