Drill Bits

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

The SDS plus-9 Speed Clean Drill Bit is available as 4-cutter for bigger diameters and as 2-cutter for smaller diameters and features an accurate centring tip. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. It is made in Germany. It is compatible with rotary hammers with SDS plus shanks and works in combination with industrial M-class vacuum cleaners. The SDS plus-9 Speed Clean Drill Bit allows for dustless drilling. While working, the built-in vacuum attachment pulls dust though extraction holes in the drill bit, allowing optimum material removal without additional steps. This technology results …

The MAK4 is a premium SDS Max drill bit with a dynamic 4 cutter head. It has a symmetrical head geometry with centering tip which helps to limit the effects of rebar collision, with shortened spiral windings and conical shaped dust tracks for extra fast material removal. The MAK4 significantly raises the performance parameters of drilling speed and life expectancy, considerably reducing the cost per hole. Ideal for concrete, stone, masonry, engineering brick, fixings & anchors. Features & Benefits • Premium SDS Max drill bit with a dynamic 4-cutter head • Symmetrical head geometry with centering tip • Shortened spiral windings and conical shaped dust tracks for extra fast material …

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

Dewalt raises the bar still further with a superior range of SDS MAX drill bits. For use with SDS MAX drive hammer drills (Hilti type F, G, or Y) for anchor, fixing or clearance holes in masonry, concrete, brick or block work. Specifications: • Diameter: 32mm • Length: 570mm • Working Length: 450mmFeatures & Benefits• Drill bit tip delivers effective drilling / breaking longer. • Drill bit tip maintains its effective drilling / breaking edges longer. • 4 cutter tip enables a more circular hole to be drilled • Debris is removed more efficiently from the hole allowing impacts to perform more effectively

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

The IRWIN Marples M750 Splitproof Pro Bevel Edge Chisels have a carbon-rich blade that is solid forged, hardened and tempered up to the last inch for a long working life. They have guaranteed splitproof handles that help to absorb harmful vibrations. The chisels have a highly durable friction grip, sturdy neck and bolster, and are honed and sharpened. This IRWIN Marples M750 Splitproof Pro Bevel Edge Chisel Set is supplied in a wallet. Contains the following sizes 6, 10, 13, 19 and 25mm (1/4, 3/8, 1/2, 3/4 and 1in).

• HSS Dura 50 core bit with 3/4 in Weldon holder• TiN surface coating for outstanding service lives and the best glide properties.• Metric dimensions, cutting depth 50 mm.Specifications:Cutting depth: 50 mmBore Ø: 30 mm

• HSS Dura 50 core bit with 3/4 in Weldon holder• TiN surface coating for outstanding service lives and the best glide properties.• Metric dimensions, cutting depth 50 mm.Specifications:Cutting depth: 50 mmBore Ø: 31 mm

• HSS Dura 25 core bit with 3/4 in Weldon holder• TiN surface coating for outstanding service lives and the best glide properties.• Metric dimensions, cutting depth 25 mm.Specifications:Cutting depth: 25 mmBore Ø: 34 mm

Rotabroach Raptor cutters have a unique geometry designed to offer fast cutting, long life, and dependable accuracy and finish. Features & Benefits • Raptor cutters have a unique and exclusive geometry that you will only find on genuine Rotabroach cutters • Manufactured from M2AL material. Heat treated to a higher temperature, for greater hardness • Designed to ensure that they will last longer, cut faster and give a better and more accurate finished hole than any other annular cutter Specifications • Diameter: 47mm • Length: 25mm • Max. Tensile Strength: < 900N/mm² • Ideal For: Mild & Structural Steel • 19mm / 3/4" Weldon Shank

Rotabroach Raptor cutter set. Ideal for drilling into mild & structural steel. Maximum cutting depth 25mm.Contents• RAP120 12mm Diameter Cutter • RAP140 14mm Diameter Cutter • RAP180 18mm Diameter Cutter • RAP220 22mm Diameter Cutter • RAP240 24mm Diameter Cutter • SRA25 Pilot Pin • 19mm / 3/4" Weldon Shank

Designed for intensive dry cutting on brickwork and blockwork, and particularly suitable for plumbers, electricians and other installation engineers, our Dri-core Drills will be invaluable in the construction of flues, air vents and plumbing or electrical channels. Faster rate of cut than TCT alternatives with less pressure required. 300mm saw length on 22 and 28mm diameter saws, 150mm saw length on all other diameters. NOTE: Not for use on reinforced concrete.Recommended Cutting Depth: >13Body Material: SteelTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter metric: 22mm Diameter imperial: 7/8" Saw Length metric: 300mm Saw Length imperial: 11.13/16"

Crafted from high-speed steel (HSS) with a titanium nitride (TiN) coating, this drill bit offers exceptional durability and heat resistance, ensuring long-lasting performance in a variety of drilling applications. This jobber drill bit is ideal for creating precise and accurate holes in metal, wood, plastic, and other materials. The TiN coating reduces friction and heat buildup during drilling, resulting in smoother drilling and extended tool life. Features & Benefits • Versatile bit for both hand-held and machine drilling • Titanium Nitride Tipped (2mm and above) • Bright finish and conventional point (below 2mm) • DIN 338 • Specially designed 118° Point Angle Specifications …

The Dormer A130 HSS Morse Taper Shank Drill Bit is an essential tool for heavy-duty drilling applications. Engineered from high-speed steel, this drill bit delivers exceptional durability and performance, ensuring reliable and precise drilling in a variety of materials. Featuring a Morse taper shank, the A130 drill bit provides secure and stable mounting in machine spindles, minimising slippage and enhancing drilling accuracy. This design is particularly suitable for use in lathes, milling machines, and drill presses, making it ideal for both professional and industrial environments. Features & Benefits • High speed steel construction for superior durability • Steam tempered • …

The Dormer A510 HSS TiN ADX Jobber Drill Bit is a premium tool designed for high-efficiency drilling. Coated with Titanium Nitride, this drill bit offers superior durability and heat resistance, extending its lifespan and ensuring consistent performance. Made from high-speed steel, it delivers excellent cutting power and precision, making it ideal for a wide range of materials including steel, aluminium, and plastics. Featuring a 130° split point, the Dormer A510 ensures quick and accurate starts, minimising bit wandering and improving drilling efficiency. This design enhances cutting performance, reduces the amount of force required, and ensures cleaner, more precise holes. The ADX geometry …

The Dormer A520 HSS TiN ADX Stub Drill Bit is a high-performance tool engineered for precision and durability. Designed with a Titanium Nitride coating, this stub drill bit offers exceptional wear resistance and heat dissipation, ensuring extended tool life and consistent cutting efficiency. Made from high-speed steel, it provides robust performance across a variety of materials, including steel, aluminium, and plastics. The A520 features a 130° split point that ensures accurate and quick starts, minimising bit walking and enhancing drilling precision. The ADX geometry optimises chip removal, reducing friction and heat build-up, making it ideal for high-speed drilling applications. Its shorter …