Drill Bits

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size. 5.5 mm x 150 mm.Additional Information:• Diameter: 5.5mm• Overall Length: 150mm• Pack Qty.: 1

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

The Milwaukee Hammer Drill Bits have been designed with a 2 cutter carbide tip to allow for drilling into concrete, brick, block and soft material for electrical installations, lighting fixtures and holders. Our Hammer Drill Bits also features a red flute for easy identification along with a wide flute design to remove dust faster, while also reducing heat build-up, resulting in more holes per charge. Specifications • Cutting Width: 4mm • Length: 90mm • Pack Quantity: 1Features & Benefits• Tungsten carbide tipped drill bit allow drilling into concrete, aerated concrete blocks, masonry and granite • Wide red flute for optimal material extraction and easy identifiable …

Octagonal shank chisel from selected steel with polished cutting edge. Sold loose.

The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP150PRO Professional Jobber Drill Bits have the following specifications: Diameter: 1.5mm.Pack quantity: 3.Additional Information:• Tip Diameter: 1.5mm• Working Length: 16mm• Overall Length: 40mm• Pack Qty.: 3

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø13 x 155mmDimensions: Length: 10mm x Height: 220mmWeight: 0.094KgWarranty: Consumable

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size. 5 mm x 150 mm.Additional Information:• Diameter: 5.0mm• Overall Length: 150mm• Pack Qty.: 1

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

These DeWalt drill bits have a carbide split-point tip and aggressive flute angles, they deliver the power to easily drill through a range of materials without the need to change bits. A no spin shank helps to increase efficiency by eliminating bit slippage. Features & Benefits • Suitable for wood, plastics, mild steel and non-ferrous metals and masonry • CrNiMo steel for optimal power transmission and breakage stability • Anti-slip shank with 3 milled clamping surfaces prevent rotation of the drill bit in the chuck Specifications • Head Type: Carbide Grit • Diameter: 5mm • Product Length: 113mm • Working Length: 83mm • Shank/Connection: Round

Concrete drill bit with SDS quick shank Specifications: Diameter mm: 5,0 Working length mm: 55 Total length mm: 100 Materials: Concrete Stone Materials in Detail: Concrete Natural stone Masonry Reinforced concrete

The CYL-3 Drill Bit provides lasting performance when drilling concrete. Its stamina is a result of a highly durable carbide blend specially developed and manufactured by Bosch. The blend is adapted to meet the demands of repeated use and offers high wear resistance when working with concrete. Moreover, the effective 2-flute U-shape design of the bit provides good dust removal, reducing friction, heat development and wear, resulting in an extended lifetime. The bit delivers lasting performance when drilling holes for fixings in abrasive materials such as concrete and natural stone. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing …

The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP300PRO Professional Jobber Drill Bits have the following specifications: Diameter: 3.0mm. Pack quantity: 2.Additional Information:• Tip Diameter: 3.0mm• Working Length: 30mm• Overall Length: 60mm• Pack Qty.: 2

A brad point drill bit has a centering tip for fast and accurate drilling. They give clean and precise holes when drilling through wood and wood-based materials. Features & Benefits • Centering tip for accurate starting • Chrome- vanadium alloyed steel for strength and durability • Round shank for use with standard corded and cordless drills • Suitable for general purpose use in soft or hard woods, laminates and chipboard Specifications • Diameter: 6mm • Length: 100mm

Milwaukee Hex Shank Flat Drill Bit for fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard. Ideal for door locks, morticing, electrical and plumbing work. 1/4? Hex shank reception for direct insertion into the power tool or for secure chuck grip. Ground centre point for accurate positioning and sharp wings for improved cutting performance. Specifications • Cutting Width: 10mm • Length: 160mm • Pack Quantity: 1Features & Benefits• Fast drilling of big diameters • Suitable for drilling in natural hard and softwood and chipboard • Ideal for door locks, morticing, electrical and plumbing work • 1/4? Hex shank reception …

The Stanley Fatmax Precision Metal Drill Bits are pilot point tipped for precise, accurate drilling on contact with the material. Sharp cutting edges for faster drilling and clean holes. With its HSS construction, these drill bits offer exceptional durability and superior performance. The HSS material ensures the bits longevity even under heavy use. The CNC design allows for precise and accurate drilling, resulting in clean and perfectly round holes. This ensures minimal damage to the workpiece and reduces the risk of the hole being misaligned or uneven. Features & Benefits • For use with corded and cordless hammer drills • For very fast, accurate drilling in soft steel, non-ferrous …

The SDS plus-5 Drill Bit allows for effortless drilling. For smooth work, the carbide plate is grooved and bears notches that penetrate material more easily and prevent jamming in concrete. Drill guidance for easy starts without jarring or wandering is provided by the Activeteq centring tip, which keeps the drill in place for a precise hole diameter. Furthermore, AWB brazing and hardening technology reduces vibration during drilling to minimise strain on the user. The bit is intended for use on masonry and concrete. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill …

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. Sizes 10mm and above feature cutting spurs.1 x Bahco 9629-12 Flat Bit 12mmAdditional Information:• Diameter: 12mm• Overall Length: 152mm• Pack Qty.: 1

Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.10.50mm.Additional Information:• Tip Diameter: 10.5mm• Working Length: 83mm• Overall Length: 132mm• Pack Qty.: 1