Drill Bits

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

The Long HSS Twist Drill Bit Ground is for drilling deep holes through metal with maximum precision. Its extended length makes this long bit capable of drilling deeply. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. The Long HSS Twist Drill Bit Ground is manufactured to DIN 340. The drill bit is Type N (flute angle) with …

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

The Long HSS Twist Drill Bit Ground is for drilling deep holes through metal with maximum precision. Its extended length makes this long bit capable of drilling deeply. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. The Long HSS Twist Drill Bit Ground is manufactured to DIN 340. The drill bit is Type N (flute angle) with …

With an innovative carbide tip design, Stanley SDS-PLUS masonry drill bits power through masonry, concrete, and more with high grade carbide tip that maximizes bit life. The unique flute design of this drill bit allows for efficient dust removal while drilling, resulting in cleaner holes and reduced clogging. This feature not only enhances productivity but also prolongs the lifespan of the drill bit. Featuring a carbide tip, the Stanley SDS Plus Masonry Drill Bit effortlessly penetrates tough surfaces with ease, delivering fast and accurate results every time. This precision drilling tool ensures minimal vibration, reducing user fatigue and ensuring optimal control during operation. Features …

Octagonal shank chisel from selected steel with polished cutting edge. Sold loose.

The IRWIN® SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have …

The Faithfull Spoon Chisel Carving Chisel with wooden handle, deep seated tang, metal ferrule and fully polished blade. Spoon shaped chisels are used in place of straight chisels to reach deeper recesses in the wood. This product is made with FSC® 100% Certified Wood from well-managed forests. Please Note: Woodcarving chisels will require final sharpening prior to their first use. Specifications: Blade Width: 19mm (3/4in).Overall Length: 220mm.

The Stanley drill bit is used in conjunction with drills. They have a carbide tip that ensures durability. The shank of the tooling is securely fixed in the tool holder and is used for efficient drilling of tiles and glass. With its ultra sharp cutting edges, this drill bit effortlessly creates clean, smooth holes without chipping or cracking the fragile surface. Features & Benefits • Pointed carbide tip drills on contact for precise drilling • For use with corded and cordless drills • For use on ceramic tiles, glazed tiles, and non-toughened glass Specifications • Diameter: 5mm • Product Length: 70mm • Head Type: Tungsten Carbide • Shank: Round

Designed with efficiency in mind, the innovative flute design promotes swift material removal and efficient debris evacuation, reducing the risk of bit binding and ensuring a smooth drilling experience. The robust construction of the bit ensures it can withstand the demands of tough applications, maintaining its sharpness and performance over time. The carbide tip ensures durability and longevity, making it the ideal tool for drilling into concrete, brick, stone, and other masonry materials. Features & Benefits • Flat carbide tip design for less breakage in the hardest of materials • Four flute design removes debris quickly for fast drilling • Hardened steel body for maximum strength …

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…

The SDS plus-7X Drill Bit provides an outstanding lifetime when drilling in reinforced concrete. Its full-carbide 4-cutter head is composed of the highest-quality carbide, which fortifies the head and provides exceptional impact resistance. Its consistent distribution of drilling power guarantees there is no power loss, which increases the overall lifetime. Bosch´s unique diffusion welding technology (IDS) provides a strong bond between head and flute. Moreover, the 4-flute design with wide channels reduces wear on the bit by allowing for effective dust removal. This bit is intended for hammer drilling in masonry, concrete and reinforced concrete. To achieve accurate results, the visibility o…

• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 120mm Working length. • Supplied in a plastic wallet.HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 120mm Working length. Supplied in a plastic wallet.• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 120mm Working length. • Supplied in a plastic wallet. • Model No. BSB15.5Technical Specification:Size: ø15.5 x 180mmDimensions: Length: 20mm x Height: 250mmWeight: 0.148KgWarranty: Consumabl…

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bit suitable for a variety of applications. Drills are fully hardened and ground.Technical Specification:Size: ø16 x 300mmDimensions: Length: 10mm x Height: 365mmWeight: 0.23KgWarranty: Consumable

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bit suitable for a variety of applications. Drills are fully hardened and ground.Technical Specification:Size: ø18 x 200mmWeight: 0.21KgWarranty: Consumable

With an innovative carbide tip design, Stanley SDS-PLUS masonry drill bits power through masonry, concrete, and more with high grade carbide tip that maximizes bit life. The unique flute design of this drill bit allows for efficient dust removal while drilling, resulting in cleaner holes and reduced clogging. This feature not only enhances productivity but also prolongs the lifespan of the drill bit. Featuring a carbide tip, the Stanley SDS Plus Masonry Drill Bit effortlessly penetrates tough surfaces with ease, delivering fast and accurate results every time. This precision drilling tool ensures minimal vibration, reducing user fatigue and ensuring optimal control during operation. Features …

Octagonal shank chisel from selected steel with polished cutting edge. Display packed.

Faithfull Combination Augers can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be used in timber, plywood, MDF and blockwood and can be resharpened using a hand file. Short series or stubby auger bits are for use in confined spaces, such as between joists. Overall Length 120mm.

Advanced technology sets the STA53028 apart, ensuring precise and consistent results across a spectrum of tasks. Its ergonomic design ensures user comfort during prolonged use, providing a secure grip and precise control. Designed for efficiency and reliability, this Stanley accessory delivers top-notch results across diverse applications. Features & Benefits • For drilling into house bricks and masonry • For use in corded and cordless drills and impact drivers • Hex shank prevents bit slipping in standard drill chucks Specifications • Diameter: 10mm • Length: 152mm • Working Length: 82mm

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

Scutch combs are designed to fit into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the comb holder being used. These Roughneck Scutch Combs are made from strong carbon steel, which is zinc coated for increased resistance to corrosion. They are contractor grade and come with a lifetime guarantee. Size: 25mm (1 inch).Pack of 5Additional Information:• Scutch Type: Scutch Combs• Size (mm): 25

Replacement drill bit. Specifications: • Dia Metric: 6 • Overall Length Metric: 93

Bosch 2608831034 SDS plus-3 Drill Bit For Masonry 12.0 x 200 x 260mm The Bosch 2608831034 is a single SDS plus-3 drill bit with a diameter of 12.0mm and a working depth of 200mm. The drill bit is suited to drilling in masonry and concrete. It is extremely long-lasting and wear-resistant thanks to its high-alloy steel construction and feature a 4-flute dura design which provides effective dust removal for optimised drilling performance. For use with rotary hammers with SDS plus holders. Features:
- SDS plus-3 Drill Bit offers durability while drilling concrete
- 4-flute dura design provides effective dust removal for increased endurance
- High-alloy steel produced with optimised hardening …