Drill Bits

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate generates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

DeWalt DT90292-QZ Spade Bit Tri Flute Extreme 14 x 152mm Impact Rated Self Feed 6 X Faster versus Traditional Spade Bit

DeWalt DT90240-QZ Spade Bit Tri Flute Extreme 16 x 152mm Three cutting edges allow for up to 6x faster cutting* combined with tri-flute design for optimum chip removal. Three cutting spurs for cleaner, faster holes and extended drilling life. Tri-flute tapered design for faster removal of wood chips and less binding.

The IRWIN® SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have …

Faithfull Plug Cutters are used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes. For best performance, the power drill should be held in a stand. For a perfect grain match use an offcut from the timber being plugged. To ensure an accurate fit we suggest you use the same screwsink from the Faithfull brand. The set of 4 contains sizes No 6, 8, 10 and 12.Cuts Size 12 Plugs (11.5mm)Additional Information:• Type: Plug Cutter• Screw Compatibility: No.12

Milwaukee MX4 SDS Plus drill bits have a symmetrical 4 cutter geometry (4 x 90°) and are ideal for making perfect round holes when fitting anchors. The high volume flutes ensure efficient removal of dust and debris while drilling, and a centering tip enables quick and accurate starting. Features & Benefits • Symmetrical 4 cutter geometry • High volume flutes ensure efficient removal of dust and debris • Centering tip for easy spot drilling with pinpoint accuracy • Welded solid carbide tips on sizes 5mm - 10mm • Increased carbide results in higher durability • Four breaker points pulverize material for faster drilling • Enhanced rebar guards for improved …

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.Specifications:Diameter: 18mm.Working length: 50mm (2in).Overall length: 100mm (4in).Additional Information:• Diameter: 18mm• Overall …

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size.7 mm x 300 mm.Additional Information:• Diameter: 7.0mm• Overall Length: 300mm• Pack Qty.: 1

• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 130mm Working length. • Supplied in a plastic wallet.HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 130mm Working length. Supplied in a plastic wallet.• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 130mm Working length. • Supplied in a plastic wallet. • Model No. BSB16.5Technical Specification:Size: ø16.5 x 180mmDimensions: Length: 20mm x Height: 200mmWeight: 0.17KgWarranty: Consumable…

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Specifications: • Diameter: 6mm • Length: 260mm • Working Length: 200mm • Pack Qty: 1Features & Benefits• The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry …

The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials.The Irwin IRW10502251 HSS Pro Drillbits comes in a bulk pack of 10. Soecifications:Drillbit diameter: 2.0mmTotal length: 49mmWorking Length: 24mmAdditional Information:• Tip Diameter: 2.0mm• Working Length: 24mm• Overall Length: 49mm• Pack Qty.: 10

The innovative DeWalt Extreme 2 SDS Plus drill bit is amongst the best available on the market in terms of speed, lifetime and endurance. Suitable for fast drilling of plug, anchor or clearance holes in masonry, stone, concrete and brick/block work. It features an optimised mounting shank which provides perfect grip and optimum power transmission, with a hardened steel body for extra strength and reduced breakage. Solid two cutter head is flanked by two individual cutting tips delivering a fast and efficient drilling speed. Specifications • Diameter: 8mm • Length: 260mm • Pack Quantity: 1 Features & Benefits • Superior carbide grade for long life and greater durability • …

Milwaukee MX4 SDS Plus drill bits have a symmetrical 4 cutter geometry (4 x 90°) and are ideal for making perfect round holes when fitting anchors. The high volume flutes ensure efficient removal of dust and debris while drilling, and a centering tip enables quick and accurate starting. Features & Benefits • Symmetrical 4 cutter geometry • High volume flutes ensure efficient removal of dust and debris • Centering tip for easy spot drilling with pinpoint accuracy • Welded solid carbide tips on sizes 5mm - 10mm • Increased carbide results in higher durability • Four breaker points pulverize material for faster drilling • Enhanced rebar guards for improved …

Dewalt DT4774 Extreme Impact Flatwood Drill Bit 30mm x 152mm The Dewalt DT4774 drill bits are designed for drilling wood materials such as chipboard, softwood and hardwood. It has been manufactured with a robust steel shank for increased durability and champered outer cutting spurs for razor sharp, clean precise drilling. Features:
- Ideal for door locks, electrical and plumbing work Specification:
- Cutting Diameter: 30mm 
- Length: 152mm
- Pack Quantity: 1

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bit suitable for a variety of applications. Drills are fully hardened and ground.Technical Specification:Size: ø18 x 250mmDimensions: Length: 10mm x Height: 320mmWeight: 0.2KgWarranty: Consumable

The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.Diameter: 8.0mm.Working Length: 75mm.Overall Length: 117mm.Additional Information:• Tip Diameter: 8.0mm• Working Length: 75mm• Overall …

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill …

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Specifications: • Shank Diameter: 1/4 hex • Dia Metric: 10 • Overall Length Metric: 152

The CYL-9 Ceramic Tile Drill Bit is the standard choice when drilling in tiles. Dry drilling without lubrication is possible, which makes working with this bit effortless and convenient. Additionally, it has a simple flute-less design, which is especially suitable for drilling through soft-to-medium hard tiles. Drill without impact at low speeds. The bit is compatible with corded or cordless non-impact drills with a cylindrical shank system. Pack of 1 • Standard for Drilling in Tiles • CYL-9 Ceramic Tile Drill Bit is the standard choice when drilling in tiles • Dry drilling without lubrication for convenient use • Simple flute-less design is especially suitable for drilling …

Get Extreme results with The Dewalt DT9517 SDS+ Drill Bit The Dewalt DT9517 SDS+ Extreme drill bit is 6mm in diameter with a working depth of 200mm. It has great performance in terms of speed, life, and endurance. Perfect for drilling materials such as concrete, masonry, stone and brick thanks to its superior carbide grade construction and hardened body. The new tip design ensures better bit penetration for optimum drilling performance and precision. Features:
- Optimised flute design allows efficient debris removal
- Hardened body for extra strength and reduced breakage
- Superior carbide grade for long life and greater durability
- New tip design ensures better bit penetration, longer …

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The Blue Spot Brick Bolsters are manufactured from induction hardened, drop forged steel with a heavy-duty grip.Size: 57mm (2.1/4in).Additional Information:• Width: 57mm

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Specifications: • Diameter: 6.5mm • Length: 210mm • Working Length: 150mm • Pack Qty: 1Features & Benefits• The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry …