Drill Bits

• HSS Cobalt drill bit set.• 135° Split point self-centring tip makes for easier penetration.• 5% Cobalt helps to increase life of drill bit.• Suitable for drilling high carbon steel and stainless steel.• Contents ø1.5 (x16), 2 (x16), 2.5 (x15), 3 (x10), 3.2 (x10), 3.5 (x8), 4 (x8), 4.5 (x3), 5 (x3), 5.5 (x2), 6 (x2), 6.5 (x2), 8 (x2), 10mm (x2).• Supplied in a metal storage case.HSS Cobalt drill bit set. 135° Split point self-centring tip makes for easier penetration. 5% Cobalt helps to increase life of drill bit. Suitable for drilling high carbon steel and stainless steel. Supplied in a metal storage case.• HSS Cobalt drill bit set. • 135° Split point self-centring tip makes for ea…

• No-Load Speed: 4200rpm.• Fast, simple and effective way to sharpen your drill bits.• Gives a perfect angle/sharpened head to make drilling with your bit easier.• Suitable for up to 118° HSS Titanium, Cobalt, Carbon Steel and Split Point bits in range ø3-13mm.Fast, simple and effective way to sharpen your drill bits. Gives a perfect angle/sharpened head to make drilling with your bit easier. Suitable for use with HSS Titanium, Cobalt and Carbon Steel bits in range ø3-13mm.• No-Load Speed: 4200rpm. • Fast, simple and effective way to sharpen your drill bits. • Gives a perfect angle/sharpened head to make drilling with your bit easier. • Suitable for up to 118° HSS Titanium, Co…

The IRWIN Marples M373 Splitproof Bevel Edge Wood Chisels are ideal for heavy-duty use and have splitproof handles. They are made from best in category steel for improved sharpness and edge retention. The blade, bolster and tang are forged from one piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles that will withstand heavy usage. The handle is also contoured to provide added control.This 8 Piece IRWIN Marples M373 Splitproof Bevel Edge Chisel Set is supplied in a wooden presentation box. Contains: Contains the following sizes: 6mm (1/4in), 10mm (3/8in), 13mm (1/2in), 19mm (3/4in), 25mm (1in), 32mm (1.1/4in),…

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

The Diamond Wet Drill Bit delivers long life when drilling hard ceramics. Its high-class diamond coating makes the bit very robust and wear-resistant, allowing for extended usage. The product is intended for a variety of materials from soft wall tiles to very hard floor tiles such as fine stoneware. This robust and compact set features a transparent storage box providing a good overview of its contents as well as safe storage and transport. Do not drill in impact mode. Use water cooling when operating drills with this product. It is suitable for use with cordless drills. 4-piece Robust Line diamond wet drill bit set • Long Life for Hard Ceramics • Diamond Wet Drill Bit delivers long …

Makita's Nemesis II SDS Plus drill bits are PGM Sichersafe certified, with centering tips and symmetrical 4-cutter heads. Drilling into reinforced concrete is no longer a hit and miss application, reinforcing bar being no obstacle for the Nemesis drill. Also perfect for use in the hardest of natural stone. Nemisis II drill bits have a wear mark on the head that highlights any compromise in PGM certified drilling accuracy. As long as the wear mark is still visible, the drill bit is suitable for making anchor holes. Its unique symmetrical head geometry ensures precision drill holes. Perfect for critical anchor fixings and where spot drilling is required. The Nemesis will drill up to 50% more holes …

DeWalt raises the bar still further with a superior range of SDS MAX drill bits. For use with SDS MAX drive hammer drills (Hilti type F, G, or Y) for anchor, fixing or clearance holes in masonry, concrete, brick, or block work. Features & Benefits • Drill bit tip delivers effective drilling / breaking longer. • Drill bit tip maintains its effective drilling / breaking edges longer. • 4 cutter tip enables a more circular hole to be drilled • Debris is removed more efficiently from the hole allowing impacts to perform more effectively Specifications • Diameter: 20mm • Length: 920mm • Working Length: 800mm

DeWalt raises the bar still further with a superior range of SDS MAX drill bits. For use with SDS MAX drive hammer drills (Hilti type F, G, or Y) for anchor, fixing or clearance holes in masonry, concrete, brick, or block work. Features & Benefits • Drill bit tip delivers effective drilling / breaking longer. • Drill bit tip maintains its effective drilling / breaking edges longer. • 4 cutter tip enables a more circular hole to be drilled • Debris is removed more efficiently from the hole allowing impacts to perform more effectively Specifications • Diameter: 26mm • Length: 540mm • Working Length: 400mm

HSS Pro Drill long series drill bits have a body manufactured from high quality HSS steel and have a bright finish. The drill bits have precision ground cutting edges which enable fast drilling and ensure perfect finishing. They have a ground flute for maximum accuracy and fast chip removal. The universal 118º point shape makes the drill bits suitable for drilling a wide selection of materials. They are perfect for drilling low carbon steel, soft metals, wood and plastics. They are manufactured to DIN 340 standards and have a cylindrical shank.The Irwin HSS Long Pro Drill Bits come in a bulk pack of 5. Specification: Size: 12.0mm.Additional Information:• Tip Diameter: 12.0mm• …

Length: 165mm, Fitment: " BSP Female

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications: Cutting depth: 25 mm Bore Ø: 57 mm

• HSS Nova 25 core bit with QuickIN holder• Industrial standard. Metric dimensions, cutting depth 25 mm.Specifications:Cutting depth: 25 mmBore Ø: 40 mm

• HSS Nova 25 core bit with QuickIN holder• Industrial standard. Metric dimensions, cutting depth 25 mm.Specifications:Cutting depth: 25 mmBore Ø: 41 mm

• TCT Ultra 50 core bit with 3/4 in Weldon holder• Very long service life and outstanding cutting performance. Metric dimensions, cutting depth 50 mm.Specifications:Cutting depth: 50 mmBore Ø: 55 mm

18-piece wood twist drill bit and bit set. High quality, metal twist drill bits for precise, splinter-free drilling in soft wood, hard wood and laminated panel material. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for great durability. Very good concentricity. The hexagonal shaft ensures very good power transfer. The Rapidaptor universal holder ensures rapid bit change without any extra tools. Drive: ¼" hexagon, suitable for holders with take-up as per DIN ISO 1173-D 6.3. Features and Benefits: • Ideal for mobile repair and assembly work • Rapidaptor holder for rapid bit change • 1/4" drive suitable for power screwdrivers • Rapidaptor u…

The Osborn HSS Co8 M42 Long Series Cobalt Drill Bit is great for drilling deep holes in stainless steels and difficult to cut materials such as titanium and inconel. Specifications • Diameter: 11.8mm • Working Length: 128mm • Total Length: 195mm

The Osborn HSS Co8 M42 Long Series Cobalt Drill Bit is great for drilling deep holes in stainless steels and difficult to cut materials such as titanium and inconel. Specifications •Diameter: 12mm •Working Length: 134mm •Total Length: 205mm

The Rotabroach M42 series employs a unique and exclusive geometry that you will only find on genuine Rotabroach cutters. This unique design ensures that the cutter will last longer, cut faster and give a better and more accurate finished hole. Rotabroach M42 cutters are manufactured from high speed steel with 8% cobalt. The cobalt allows the material to absorb more heat and makes it stronger and less prone to chipping. Designed for low grade rail. Specifications • Max. Tensile Strength: < 1100N/mm² • Ideal For: Mild & Structural Steel & Rail Track • Diameter: 29mm • Length: 50mm

Engineered to tackle tough materials, the Rotabroach hole cutter ensures smooth, accurate cuts through steel, stainless steel, and other hard metals. The carbide tips maintain sharpness longer than traditional cutters, providing consistent, reliable performance and reducing the need for frequent replacements. The cutter's advanced design minimises vibration and reduces operator fatigue, ensuring a more comfortable and efficient cutting experience. Its robust construction and superior materials ensure longevity and optimal performance, even in demanding conditions. Features & Benefits • Ideal for construction steel, stainless steel, high strength steel • Tungsten carbide tips harder …

Rotabroach Raptor cutters have a unique geometry designed to offer fast cutting, long life, and dependable accuracy and finish. Features & Benefits • Raptor cutters have a unique and exclusive geometry that you will only find on genuine Rotabroach cutters • Manufactured from M2AL material. Heat treated to a higher temperature, for greater hardness • Designed to ensure that they will last longer, cut faster and give a better and more accurate finished hole than any other annular cutter Specifications • Diameter: 46mm • Length: 25mm • Max. Tensile Strength: < 900N/mm² • Ideal For: Mild & Structural Steel • 19mm / 3/4" Weldon Shank

Crafted from high-speed steel (HSS) with a titanium nitride (TiN) coating, this drill bit offers exceptional durability and heat resistance, ensuring long-lasting performance in a variety of drilling applications. This jobber drill bit is ideal for creating precise and accurate holes in metal, wood, plastic, and other materials. The TiN coating reduces friction and heat buildup during drilling, resulting in smoother drilling and extended tool life. Features & Benefits • Versatile bit for both hand-held and machine drilling • Titanium Nitride Tipped (2mm and above) • Bright finish and conventional point (below 2mm) • DIN 338 • Specially designed 118° Point Angle Specifications …

This comprehensive set features 24 high-speed steel (HSS) drills with a titanium nitride (TiN) coating, ensuring enhanced durability and extended tool life. Ideal for a variety of materials including steel, stainless steel, aluminium and wood, these drills offer precision and reliability for your drilling tasks. Features & Benefits • Suitable for use in both machine and hand-held applications • Diameters in set: 1-10.5mm + 3.3, 4.2, 6.8, 10.2mm • Standard helix, right hand spiral, wider flutes • Comes in a useful plastic storage case • For use on steel, aluminium and other materials, wood, and chipboard Specifications • Material: HSS • Tip Angle: 118° • …

Dormer A095 TiN coated tipped HSS jobber drills in a plastic case, ideal general purpose engineering drills. This set contain the Dormer A002 general purpose jobber drills, which are made from High-Speed Steel with TiN coated for high wear resistance, lower friction, longer life, with good self-centring capability on a wide range of materials. Features & Benefits • Suitable for both hand and machine use • Ideal for steel, aluminium and other materials, wood and chipboard. Contents • 51 drill bits - Range of sizes from 1mm to 6mm by 0.1mm

The Dormer A110 HSS Long Series Drill Bit is a premium-quality tool designed for precision drilling in various materials. Made from high-speed steel, this long series drill bit offers exceptional durability and performance. Featuring a 118° point angle, the Dormer A110 ensures accurate and efficient drilling, reducing the risk of bit wandering and ensuring clean, precise holes. Its high-speed steel construction provides excellent resistance to wear and heat, ensuring a long tool life and reliable performance even in demanding conditions. Features & Benefits • High speed steel • DIN 340 • Steam tempered • 118° point angle • Long series Specifications • Diameter: …