Car Pumps & Compressors

Pistol - grip fitted with a clip-on connector compatible for most vehicles including; cars commercial vehicles motorbikes and trailers and the easy to read 65mm digital gauge is attached with a heavy-duty rubber cover for increased protection. Maximum inflation pressure 20 bar (300psi). Supplied with a 1/4 BSP male adaptor.PTDDRPDIR91313"

Features: Easy to use:Just plug into your car cigarette lighter for power, slip universal adapter over tire valve and youre ready to inflate. Portable and Lightweight:The inflator is made of ABS, it is lightweight and has compact design, convenience to put it in trunk of car and not occupy any space. Pressure Checking Gauge:The inflator is equipped with pressure checking gauge.Powered by your 12V car cigarette lighter. Scene:It is good for the emergency needs when you are on highway and countryside road or rush for office on the morning while the tire low pressure. Application:The prouct is suitable for highway or outdoor emergency when the tyre is flat, swiming ring, air bed, kayaks, ball and …

Pressure is reduced to operating pressure Condensation water is filtered out Filter pressure regulators extend the advantages of the pressure regulator through semi-automatic drainage Pressure gauge for operating pressure settings International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Composite body and dial type gauge with rubber protector. Calibrated in bar and psi. Fitted with 500mm rubber hose and single clip-on connector.Tyre Inflator with Clip-On Connector• Composite body and dial type gauge with rubber protector.• Range: 0-10bar/0-145psi.• Fitted with 500mm rubber hose and single clip-on connector. • Model No. SA9302Model No: SA9302:Brand: Sealey:Inlet Size: 1/4BSP:Maximum Air Supply: 12bar(175psi):Minimum Air Supply: 145psi:Nett Weight: 0.56kg:Range: 0-10bar(0-145psi):PTDSEASA9302

Features: Pump is made of stainless steel , hard to rust, which is non-toxic materials, anti-corrosion and enduring. Fixed filter is not removable when you use it. Dirty filter can be detached, easy to clean. It can transfer diesel oil, fuel water or kerosene and safely. It is forbidden to pump gasoline, alcohol, acid and alkali and other flammable, explosive and corrosive liquids. It is suitable for harvester, large agricultural machinery, construction machinery, big wheel towing and other field operation refueling inconvenient means of transportation and equipment and machinery that cannot reach the gas station refueling. The pump adopts DC 12V/24V DC motor, put 12V/24V plug in a car battery …

Spare parts for PCL tyre inflators. Features and Benefits Allows you to replace most aspects of your PCL tyre tools Department of Transport inspected to ensure quality and safety of your equipment

The Mini Bike Shock Pump is a powerful lightweight bicycle pump,you need to easily repair a flat tire and get back on the road quickly. Features: 300 PSI for front suspension and front fork,universal for schrader valve. Constructed with lightweight aluminum alloy body and ergonomic plastic handle. With a built-in pressure gauge to prevent damage from over inflation. Precise-adjust button 2-3 psi air pressure control for per push. 360 degrees rotary hose and level lock for easy pumping. Specification: Vale: Standard Schrader Valve Barrel: Aluminum alloy Pressure: Max. 300 PSI / 20.7 bar Pump Length: 255 - 385 mm / 10.0 - 15.2 in Hose Length: 180 mm / 7.1 in Pressure Gauge Diameter: 40 mm / 1.…

Manual double action inflator valid for any type of inflatable paddle surfboard.As it includes standard accessories, you can also use it with beds, mattresses, etc.The great advantage of this model is that you will use all your energy because it inflates both during the ascent and during the descent of the crank being thus a faster and more efficient inflation.Features:Maximum pressure:30 PSI.Pressure gauge.Detachable pump.Product weight:1,2 kg

Use For Inflating Sups Or Wing Or Kite Bladders. Supplied With Varied Adaptors.Features:- Foot Stand For Easy Bracing- Easy Read Pressure Gauge- Various Adaptors Provided- Ergo Shaped Handles- Compact Size

Material: Metal + Rubber Color: Silver+Black Using tire can be inflated fast without removing the side wheel, Such as truck, bus and other vehicle which have two wheels at the back of themselves. Using valve core of the inside wheel can be easily replaced and fitted, in order to the compressing air fast going into the inside tire.Lock on clip, rubber flexible air hose, male thread. Ideal for inflating tires on trucks, campers, etc. Male Thread Diameter: About 1.2cm/0.47" Total Length: Approx. 37.5cm/ 14.76" Quantity:1Pc Note: Due to the difference between different monitors, the picture may not reflect? the actual color?of the item. Thank you!

QS-3/8-8 8mm OD-3/8" BSPT Hex Body Male Stud Coupling Festo by Festo

This 230V air pump inflates the biggest towable in a flash. This nifty little thing comes with 3 different nozzles.

Very glad to see you in my shop. Specification: Product name: NPT female thread connector Product material: brass Product color: yellow Product size: about 20*56mm Interface diameter: about 8mm Product Type: 14NPT Thick Copper Solid Brass Quick Connect Air Connector Packing List: 1 * Female Thread Connector Wish you a happy shopping We warrant that the products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.

Description: Name: Automobile Tire Inflator Power: 120W Voltage: 12V 7.4V Cylinder diameter: 17mm Battery capacity x number of cells: 1800mA x 2 cells Charging time: 4 hours Color: Black Packaging size: 165 x 80 x 117mm Product weight: 0.538kg Air pump flow rate: 30L/min Inflation noise (at one meter): less than 85 decibels Number of fully charged tires: 3 tires (195/55R15 tires) Maximum set pressure: 150PSI Vehicle line length: 3 meters Packing list: 1 x car wireless air pump 1 x inflatable nozzle 3 x inflatable adapter 1 x USB charging cable 1 x user manual Note: 1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding. 2. Due to the difference of

In-line tyre inflator fitted with a clip-on connector compatible for most vehicles including; cars commercial vehicles motorbikes and trailers and the easy to read 65mm digital gauge is attached with a heavy-duty rubber cover for increased protection. Maximum inflation pressure 20 bar(300psi). Supplied with a 1/4 BSP male adaptor.PTDDRPDIR91327"

Very glad to see you in my shop. Specifications: Type item: Tire inflation valve connector Material: copper + zinc alloy Product size: 52*50mm Thread diameter: approx. 8mm0.31" Color: as shown Specification: can be deflated Scope of application: American tire orifice Product Description: 1. Full metal structure 90 degree lock tire inflation chuck, suitable for bicycle, motorcycle, automobile tire nozzle. 2. The inflatable nozzle can be inflated to the American tire nozzle quickly, quickly connect the tire nozzle, no air leakage. 3. Easy to operate and suitable for most of the vehicle air charging pump. 4. The external thread is the same as American tire nozzles, suitable

Suitable for textiles, boxes, mesh crates, etc. For staplers Bostitch, Esco, KWB, Lux, Novus, Rocafix, Rocagraf, Swingline Width in mm: 13 Length in mm: 8 Thickness in mm 0.75

Die-cast body and digital type gauge with rubber protector. Displayed in psi bar kpa and kg/cm². Fitted with 500mm rubber hose and single clip-on connector. Supplied with 2 x AAA batteries.Digital Tyre Inflator with Clip-On Connector• Die-cast body and digital type gauge with rubber protector.• Displayed in psi bar kPa and kg/cm².• Range: 0-10bar(0-150psi).• Display Type: backlit LCD.• Fitted with 500mm rubber hose and single clip-on connector.• Batteries: 2 x AAA (supplied).• Inlet Size: 1/4BSP.• Model No. SA400Model No: SA400:Accuracy: +- 3psi:Battery: 2 x AAA (supplied):Brand: Sealey:Inlet Size: 1/4BSP:Maximum Air Supply: 150psi:Nett Weight: 0.388kg:Pressure Units: psiPTDSEASA400

Material: Metal + Rubber Color: Silver+Black Using tire can be inflated fast without removing the side wheel, Such as truck, bus and other vehicle which have two wheels at the back of themselves. Using valve core of the inside wheel can be easily replaced and fitted, in order to the compressing air fast going into the inside tire.Lock on clip, rubber flexible air hose, male thread. Ideal for inflating tires on trucks, campers, etc. Male Thread Diameter: About 1.2cm/0.47 Total Length: Approx. 37.5cm/ 14.76 Quantity:1Pc Note: Due to the difference between different monitors, the picture may not reflect? the actual color?of the item. Thank you!

Pump your SUP effortlessly with this easy-to-use, double-action high-pressure hand pump. The integrated pressure gauge is easy to read and allows you to easily see the desired pressure.Tip: As the pressure increases, flip the switch to return to a single action for easier pumping experience.Features:- Durable aluminum shaft- Lightweight and easy-to-use foot stand- Extra strong inflation hose- Built-in air pressure gauge- Quick swollen and deflated- Single / double switch design- Removable T-handleSpecifications:- Maximum pressure of 27 PSI / 1.9 BAR- Capacity: 2000 cubic cm- 1.25 m / 4.5 ft air hose

This is the most convenient pump on the market.It is great to use to inflate small inflatables and airbeds or to use with a 12V pump to top off your larger inflatables so they are nice and firm.The double action hand pump provides a continuous stream of air on the up and down stroke for faster inflation.It is made from lightweight non-corrosive plastic and comes with 4 inflation adapters for just about any valve you will come across.Double Volume/Double Action With Continuous Airflow On The Up And Down Stroke0.3 Bar Pressure And 2 × 2 LiterHose Locking System That Allows The Hose To Lock Into The Body So It Won´t Fall Off During Use4 Universal Valve AdaptersHeavy-Duty Molded Construction with Er…