UPS

Origin Storage Uniti Power Symphony Online Double Conversion 230V 2U 3kVA / 2.7kW 8 x IEC C13 + 1 x IEC C19

High efficiency up to 94% Built-in active PFC function (SDR-120/240/480/960) Can be installed on DIN rail TS-35 / 7.5 or 15 Built-in DC OK relay contact 3 years warranty

EU PLUG.Voltage stabilizer PNI SVM-10K, 10 KVA, with servomotor, 230V output.Automatic voltage stabilizer:- PNI SVM-10K voltage stabilizer with servomotor consists of a contact voltage regulator, a servo-electric motor and a self-control circuit.The self-sampling circuit that sends a signal for the operation of the actuator and for adjusting the position of the brush carbon, will ensure a continuous adjustment and an output voltage as constant as possible.Automatic voltage adjustment:- The PNI SVM-10K single-phase voltage stabilizer has been designed to maintain a constant voltage level at the output.When the mains voltage fluctuates, the stabilizer will automatically adjust the voltage as close …

Eaton Cable 13A UK plug to IEC C19 Female

ATEN's SP100 (SNMP card) is an UPS monitoring equipment. Allows connection of the UPS directly to the ethernet network through a RJ-45 connector without using RS-232 ports on the computer and without loading any individual UPS management software on the network server. User can remotely control the UPS and monitor UPS current status from any off site location. SP100 can communicate the status of a UPS and issue commands to it.N/A1x SP100N/A1x Installation CDN/A1x User Instructions

Origin Storage Uniti Power Symphony Online Double Conversion 230V 2U 1.5kVA / 1.5kW 4 x IEC C13

Teltonika BAT120 uninterruptible power supply (UPS) Line-Interactive 22 W

Schneider Elec. (APC) ASY System UPS 3KVA SRVS3KI Input voltage: 220..240V Primary frequency: 40..70 Hz Output voltage: 220-240V Delivery: Schneider Elec. (APC) ASY UPS System 3KVA SRVS3KI, Packaging Unit: 1 Piece, EAN: 0731304338147

EU PLUG.IGOR STEADY is the range that improves the control and power reliability of your critical devices.The ZGR STEADY series offers a SAI/UPS solution with optimal levels of efficiency and reliability for all critical devices that need continuity and reliability in the power supply.They feature a very compact tower format to save space in server rooms, small offices and home use.

Line interactive High Frequency (Sinewave, Booster, Fader) UPS - Tower/Rack 2U format Power: 3000 VA / 27000 Watts - Standard runtime: 10 minutes Power supply with 8 total IEC-C13 outlets + 1 IEC-C19 outlet Delivery Contains: 1 UPS + 1 IEC input cable + 2 IEC output power cords + USB Cable + Serial Cable + 2 feet for tower installation + 1 rail kit for 19’ rack mounting + 2 output cable lockers + Safety guide + Quick Start 2 years standard warranty

Intuitive LCD interface Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. High frequency design Reduces or eliminates bulky transformers resulting in lighter units for ease of handling. Auto recognition of external batteries UPS recognizes when external battery packs are attached and automatically adjusts runtime. Predictive replace battery date Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve …

The regulator monitors the exciter excitation current as a function of the alternator output voltage. Very simple in design,the alternator with shunt excitation has no sustaining short-circuit capacity. Voltage Regulation:around +/- 0.5; Voltage supply/sensing range 85 -139 V (50-60Hz) Rapid response time (500 ms) for a transient voltage variation amplitude of 20 Voltage setting P1; Stability setting P2. Initial potentiometer settings : 1) P1 potentiometer (AVR voltage adjustment): fully anti-clockwise. 2) Remote voltage adjustment potentiometer: centre position. Run the alternator at its rated speed. If the voltage does not increase, the magnetic circuit should be remagnetized (see section …