180 mm cutting discs

DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, aluminium and non-ferrous metals. Specifications • Diameter: 180 mm • Thickness: 1.5 mm • Bore Size: 22.23 mmFeatures & Benefits• Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in airborne …

Dronco Perfect Line - The best-seller. Not only brilliant with its price/performance ratio. It has proven itself a million times. The perfect line shows best results on every angle grinder.Features & Benefits:• Resin bonded• Reinforced with glass fibre• Good lifetime• Good removal rateSpecifications:Disc diameter: 180 mmDisc thickness: 3 mmBore diameter: 22.2 mmApplication:All types of metal, primarily sheet steel, construction steel and welding seams.

The C 24 R Perfect - Good service life and fast cutting at a reasonable price. The craftsman's disc that has proved itself in millions of cutting operations.Features & Benefits:• Good quality• Good lifetime• Good cutting efficiency Specifications:Disc diameter: 180 mmDisc thickness: 3 mmBore size: 22.2 mmApplications:All types of material found on the construction site, such as concrete, stone, roof tiles, sand-lime stone.

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's …

Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs with a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …

The Faithfull Porcelain Series Diamond Blades are ideal for cutting ceramic, porcelain, granite, porcelain based paving and marble. Wet cutting is recommended for a longer blade life and dust suppression, but they can also be used dry. The long-lasting, 10mm deep, continuous sintered rim enables fast and clean cuts. All blades have a centre core reinforcement plate that prevents the blade de-tensioning to increase blade life and reduce vibration. Conforms to EN 13236.This Faithfull Porcelain Diamond Blade has the following specification: Disc Diameter: 180mmBore: 25.4mmBush: 22.23mmMax. rpm: 13,300Additional Information:• Diameter: 180mm• Bore: 25.4mm

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Stone Cut Off Disc …

Lenox MetalMax is a new alternative to abrasive cut-off discs. Its breakthrough diamond technology delivers extreme durability to help you maximise work efficiencies and reduce costs in your metal cutting jobs. MetalMax blades are recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminium and non-ferrous metals. Designed for use in the same power tools as bonded abrasive discs, at the same RPMs and feed forces, MetalMax blades can be used without having to change any operating settings. Specifications • Diameter: 180mm • Thickness: 1.5mm • Arbor: 22.23mm

FEATURES:- Diamond saw blade for dry cutting- Particularly high cutting speed and above-average service life thanks to ribbed segment structure- Diameter: 180 mm- Drilling diameter: 22.23 mm- Segment width: 2.2 mm- Segment height: 7.7 mm- Max. speed: 8700 min-1