Car Pumps & Compressors

The quick and easy way to inflate tyres this Airline Tyre Inflator is a must have for automotive workshops and repair garages. Featuring two pressure scales allowing for accurate inflation of a wide range of tyres fitted to various vehicles and comfort g- Two pressure scales 0-12 Bar & 0-174psi- BSP fitting to connect to an air supply- 400mm rubber hose- Comfort grip durable plastic body- Non-slip sleeve on trigger- Gauge has protective rubber cover- Weight: 600gPTDCLA3082105

QSL-3/8-10 10mm OD-3/8" BSPT Swivelmale Stud Elbow Festo by Festo

Features: 150PSI Smart & Automatic Tire Inflator -- Max 150PSI/10.3 BAR high-pressure capacity air compressor simply connect your tire and preset tire pressure level you expect, the smart air pump will automatically stop inflating when the inflation reaches the preset value which can be avoided over inflating, safe and reliable. Large LCD Pressure Gauge -- Built-in precision chip, simply connect your air pump to any of your tires, the tire inflator will automatic detect the current pressure status. Large LCD screen with 4 switcheable unit values as PSI, BAR, KPA, Kg/cm^2, easy read even under dark enviroment. Portable Design with Bright LED Light -- The cordless air compressor only in palm size …

Hose and AdaptersFeatures:- For Inflatable Boats, Toys, Towables, Air Beds, Balls, and more- High Volume air flow- Inflates or deflates quickly- Comes with various valves and 4.5 hose1- 2 liter per stoke 2 PSI

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose.6mm Bore Straight Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose.• Model No. PCL6STModel No: PCL6ST:Brand: Sealey:Description: Straight Swivel - 6mm(1/4) Bore:Nett Weight: 0.035kg:PTDSEAPCL6ST

Inflates P185/R14 from 0-28 PSI in approximately 2 minutes or less. Plug directly into Cigarette Lighter Socket of your vehicle. Starting your engine, and connecting the screw-on tire chuck to a tire valve stem before turning the unit on. AUTO SHUT OFF Fast and accurate. Easy to operate. Auto shut off when reaching the desired tire pressure. Overheat protection shuts off automatically when overloading. EASY TO READ TIRE PRESSURE GAUGE The tire inflator is Equipped with a large high-precision and bright display that will help you to calculate the required values. 4 display units available: PSI, KPA, BAR, KG/CM². BRIGHT LED FLASHLIGHT This air compressor has a built-in bright and

QSL-3/8-8 8mm OD-3/8" BSPT Swivelmale Stud Elbow Festo by Zoro Select

To customers: life is full of surprises. Package Includes: 1 x Electric Inflator Item Name: Electric Inflator Material: PP, Metal Air Flow: 35L/min Output Power: 120 (W) Rated Voltage: DC12 (V) Display Type: Pointer Applicable Cars: Universal Features: Quick Inflating, Portable, Easy Connect Product Cylinder Block: Horizontal Bar-19 Cylinder Size Details: 16cm x 8cm x 10.2cm Power Cord Length: 245cm Air Tube Length: 40cm Notes: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. We strive for excellence. And hope you have a nice day!

Smarter Shopping,Better Living! Features: 1. The car tire inflator has a large LED digital display screen with with 4 pressure measurement units- PSI, KPA, BAR, KGCM². This air compressor will pump accurate amount of air and automatically stop inflating when the tire pressure reaches to the preset value, offering you a safe, quick and reliable using experience. 2. With 2*1800mAh super power battery, It can work continuously for close to 30min, about 3-5 hours to be fully charged. No need to connect charging cablecigarette lighter when working. High efficiency power motor, providing airflow 16LMin. 3 kinds of lights, LED, SOS, flashing lights, for the dark night of inflation, travel to

Description: Product Name: Tire Inflator Material: ABS, metal Weight: Net weight 545G Gross weight: approximately 628g Cylinder block: 19 cylinders Size: approximately 141 x 121 x 57mm Power cord length: approximately 3 meters Tracheal length: Tracheal length is approximately 40cm Output power: 120 (W) Rated voltage: DC12 (V) Packing list: 1 x Air Pump 4 x Inflatable Nozzles 1 x Instruction Manual The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws.

Pistol-grip tyre inflator fitted with a clip-on connector that's compatible with most vehicles including; cars commercial vehicles motorbikes and trailers. The easy to read 65mm analogue gauge is attached with a heavy-duty rubber cover for increased protection. Maximum inflation pressure 12 bar (170psi). Supplied with a 1/4 BSP male adaptor.PTDDRPDIR91273"

Not available.

Spray gun with gravity cup metal Spray brush with suction cup in metal design Tyre inflator with pressure gauge reading in bar and psi 4 m spiral air hose with quick coupling

Main Features: 1.This air compressor enables to inflates a standard mid-sized car tire from 0~36PSI (0-248KPA) in only 4-6 minutes. 2.It makes inflating low and flat tires in emergency easier and more convenient. Pressure Gauge Display of the air compressor unit: PSI, BAR, KPA, KGF/CM2. 3.Up to 3 meters of 12V car power cord, can effectively ensure the operation of the product radius, press the button to charge immediately without tightening. 4.Built-in a cable storage slot and hose storage slot, no need to need worry the cord is too long to put, more convenient to use. 5.With the built-in LED light, you won't have trouble seeing what you're doing with your tire, even when you're working

FEATURES:-Air pump function with 2 modes - 300L/min (4.5kpa) & 150L/min (2.5kpa).-Rechargeable - USB-C input or integrated solar panel.-3 light modes - high (150 lm), medium (100 lm), low (50 lm).-4000mAh powerbank - charge your devices with USB-A output.-Light and compact.-Robens Valve Adapter, 5 nozzles & USB to USB-C charging cable included.-IPX4 - Water resistant.-Power indicator light - battery capacity and charge time.-Hanging loop for easy attachment.SPECIFICATIONS:-Weight:275 g.-Size:7.3 x 4.8 x 13.3 cm (LxWxH).-Batteries:4000 mAh Li rechargeable battery.-

Spare parts for PCL tyre inflators. Features and Benefits Allows you to replace most aspects of your PCL tyre tools Department of Transport inspected to ensure quality and safety of your equipment

Hose and AdaptersFeatures:- Double action works on both up and down strokes- Inflates and Deflates- Provides up to 15 PSI pressure- Includes a 50 accordian style hose with 4 nozzles to fit most valves- Use for rubber boats, inflateable mattresses, watertoys and more

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose. 90° Angled connector for the difficult to reach valves.6mm Bore 90° Angled Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose.• 90° Angled connector for the difficult to reach valves.• Model No. PCL6ATModel

Description Material: Copper+Rubber Color: As the picture Size: One size Length: 8cm Diameter: 3.5cm Quantity: 1Pc Washing Care: Hand wash Label:Yes The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.

These Twin Hold-on Connectors are suitable for inflation of twin tyres. A Closed End connector is used when air is supplied directly from a main air line (i.e. compressor or air receiver). A non-return valve unseats on connection to the tyre's valve allowing air to flow into the tyre. The handles on these connectors are red in colour. Twin Hold-on Connector. Inlet size Rp 1/4.