230 mm cutting discs

Not available.

The Backing Pad is resistant to high temperatures and breakage. It provides low vibration during use, which increases its endurance. The pad is compatible with fibre sanding discs that include a nut and has a maximum speed of 13,300 rpm. It is intended for use with angle grinders.Backing Pad with M14 flange thread• Resistant to High Temperatures and Breakage• Backing Pad is resistant to high temperatures and breakage• Provides low vibration during use, which increases endurance• Compatible with fibre sanding discs that include a nutSpecifications:Diameter mm: 230

Lasts up to 30x longer than a bonded cutting discCutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical smell of bonded discs burning away while they cut. With the Expert Diamond Metal Wheel, this smell can be consigned to the past – as can regular trips to a shop to buy new metal discs.The Expert Diamond Metal Wheel uses Bosch Diamond Technology, which means optimum quality diamond grits fixed to a steel body. This super-hard edge lasts many times longer than even the best bonded discs and can cut a wide variety of ferrous and non-ferrous metals with ease. It doesn’t shatter if dropped, produces no chem…

The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. It is compatible with angle grinders.Straight• Reliable Cutting in Metal• Standard for Metal Cutting Disc cuts reliably through metal• The aluminium oxide disc is designed for general use with metalSpecifications:Specification: A 30 S BFDiameter mm: 230Bore diameter mm: 22,23Thickness mm: 3,0Materials:Ferrous metalsMaterials in Detail:Steel/ferrous metal

Features:Multi Material Circular Saw Blade delivers powerful cuts in a wide range of materials:- Base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy- Expansion slots lower vibration during use, which dampens noise and reduces heat development- HLTCG (High-Low Triple Chip Ground) teeth make the blade robust for working with abrasive materials- The HLTCG (High-Low Triple Chip Ground) teeth make the Multi Material Circular Saw Blade robust for working with abrasive materials.- It is compatible with hand-held saws.- High-quality precision-ground carbide teeth make the blade robust enough for cutting various materialsSpecifications:- Outer diameter mm: 230- Bore …

The Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality standards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting building materials such as concrete and masonry. Pack of 1 • Reliable Cuts in Universal Building Materials • Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials • Optimised diamond matrix delivers solid results thanks to the disc's high-quality standards • High-quality standards ensured …

The Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, which copes with demanding applications while delivering good results. Moreover, the disc's precision-manufactured fibreglass net ensures high stability and safety when cutting. Use this disc for cutting metal. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413, FEPA and oSa. It is compatible with angle grinders. Straight • Fast and Powerful Cutting Performance • Expert for Metal Cutting Disc provides powerful cutting performance with maximum safety • A premium aluminium oxide …

Universal blades for quick & clean cutting of a wide range of building materials. Supplied with a Bosch SDS-Clic quick locking nut for angle grinders. This enables angle grinder accessories to be installed and removed without tools. Specifications • Diameter: 230mm • Bore: 22.23mm

It is compatible with angle grinders. The Standard for Ceramic Diamond Cutting Disc provides reliable cuts in tiles. Its continuous cutting rim achieves accurate results in all sorts of tiles. Additionally, the disc's high-quality standards are ensured by the Bosch diamond competence centre in Switzerland. Use this disc for cutting ceramics, porcelain and fine stoneware. • Reliable Cuts in Tiles • Standard for Ceramic Diamond Cutting Disc provides reliable cuts in tiles • Continuous cutting rim achieves accurate results in all types of tiles • High-quality standards ensured by Bosch diamond competence centre in Switzerland Specifications: Diameter mm: 230 Bore diameter …

The Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality standards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting concrete. Pack of 1 • Reliable Cuts in Concrete • Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete • Optimised diamond matrix delivers solid results thanks to the disc's high-quality standards • Bosch´s diamond competence centre in Switzerland ensures consistent quality Specifications: Diameter mm: 230 Bore diameter mm: 2…

The Optiline Wood Circular Saw Blade Delivers Precise Quality Cuts In All Types Of Wood. Its High-Quality Precision-Ground Carbide Teeth Enable Clean Cuts, While Its Base Blade Made Of Dimensionally Stable Sk5 Hardened Steel (> 40 Hrc) Ensures Accuracy. Furthermore, The Blade´S Expansion Slots Lower Vibration During Use, Which Dampens Noise And Reduces Heat Development. Use This Saw Blade In All Types Of Wood And Wooden Materials. It Is Compatible With Hand-Held, Mitre, Sliding Mitre And Table Saws. Depending On The Number Of Teeth, Different Results Can Be Achieved With All Optiline Wood Circular Saw Blades, Which Feature Atb (Alternate Top Bevel) Tooth Geometry: When Equipped With A High Tooth C…

Bosch Circular Saw Blade Specifications:- Suitable For Materials: Wood- Blade Diameter: 23 Cm- Thickness: 1.8 Mm- Bore Size: 3 Cm- Number Of Teeth: 48- Cutting Width: 2.8 Mm- Circular Saw Blade Tooth Shape: Atb (Alternate Top Bevel)- Cutting Result: 4

The Standard for Inox Cutting Disc is a reliable choice for working on Inox. The disc is made of aluminium oxide specifically designed for use with Inox. It is free of ferrous, sulphurous and chlorinated fillers. Use this disc for cutting Inox. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. It is compatible with Bosch angle grinders.With depressed centre• Reliable Performance in Inox• The Standard for Inox Cutting Disc offers a reliable choice when working with Inox• An aluminium oxide disc specifically designed for use on Inox• Free of ferrous, sulphurous and chlorinated fillersSpecifications:Specification: WA 36 R BFDiameter mm: 230Bore …

The Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, which copes with demanding applications while delivering good results. Moreover, the disc's precision-manufactured fibreglass net ensures high stability and safety when cutting. Use this disc for cutting metal. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413, FEPA and oSa. It is compatible with angle grinders. With depressed centre • Fast and Powerful Cutting Performance • Expert for Metal Cutting Disc provides powerful cutting performance with maximum safety • A premium …

The Expert for Stone Cutting Disc provides powerful cutting performance in stone with maximum safety. The disc is composed of high-quality silicon carbide and resin specifically designed for work on stone with impressive results. The disc's precision-manufactured fibreglass fabric ensures high stability and safety when cutting. Use this disc for cutting stone. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413, FEPA and oSa. It is compatible with angle grinders. With depressed centre • Powerful Cutting Performance in Stone with Maximum Safety • Expert for Stone Cutting Disc provides powerful cutting performance in stone with maximum safety • The …

Features:- Long lasting when cutting multiple materials- Advanced steel body maintains constant speed and depth- Extra strong laser bonding of carbide grain and steel bodySpecifications:- Diameter mm: 230- Hole diameter mm: 22,23

The Standard for Marble Diamond Cutting Disc provides reliable cuts in all types of marble and plastic material. Its thin and even layer of diamonds is electroplated to its steel body to ensure reliable cutting. Use this disc for cutting marble and plastic material. It is compatible with angle grinders. • Reliable Cuts in All Types of Marble and Plastic Material • Standard for Marble Diamond Cutting Disc provides reliable cutting in all types of marble and plastic material • Thin and even layer of diamonds is electroplated to steel body to ensure reliable cutting Specifications: Diameter mm: 230 Bore diameter mm: 22.23 Cutting width mm: 2,8 Segment height mm: 3 Materials: Stone …