Drill Bits

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations. Not for use with routers. A fast feed rate is recommended. Specifications: • Shank Diameter: 3/8 • Dia Metric: 31.7 • Dia Imperial: 1 1/4 • Cut Length Metric: 57.15 • Overall Length Metric: 88.9 • Overall Length Imperial: 3 1/2

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations. Not for use with routers. A fast feed rate is recommended. Specifications: • Shank Diameter: 3/8 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 57.15 • Overall Length Metric: 88.9 • Overall Length Imperial: 3 1/2

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations. Not for use with routers. A fast feed rate is recommended. Specifications: • Shank Diameter: 1/2 • Dia Metric: 22.2 • Dia Imperial: 7/8 • Overall Length Imperial: 5

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations. Not for use with routers. A fast feed rate is recommended. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50.8 • Dia Imperial: 2 • Overall Length Imperial: 6

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations. Not for use with routers. A fast feed rate is recommended. Specifications: • Shank Diameter: 1/2 • Dia Metric: 31.7 • Dia Imperial: 1 1/4 • Overall Length Imperial: 5 1/4

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x27 • Dia Metric: 5 • Cut Length Metric: 27 • Overall Length Metric: 57.5 • Type or Grade: LH

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x30 • Dia Metric: 10 • Cut Length Metric: 35 • Overall Length Metric: 70 • Type or Grade: LH

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x30 • Dia Metric: 5 • Cut Length Metric: 35 • Overall Length Metric: 70 • Type or Grade: LH

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x30 • Dia Metric: 6 • Cut Length Metric: 35 • Overall Length Metric: 70 • Type or Grade: RH

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x27 • Dia Metric: 5 • Cut Length Metric: 27 • Overall Length Metric: 57.5 • Type or Grade: RH

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x30 • Dia Metric: 10 • Cut Length Metric: 35 • Overall Length Metric: 70 • Type or Grade: RH

Trend Snappy Forstner Bit - 25mm diameter Made from high quality forged and ground Carbon Steel the Trend Snappy Forstner Bits are designed for drilling high quality, ultra-clean and accurate holes. 25mm diameter and 80mm overall length for direct fit to Trend Snappy Chuck for hand held use. Can also be used in a pillar drill for consistent depth control. The centre point, two peripheral cutting edge and two lifter design makes the cleanest of holes in hard and softwoods, ideal for quality work. Can be used for decorative work and can drill on an edge or make overlapping holes; ideal for introducing unique designs and features to your work. Durable and hardwearing in timber, the bit can …

Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are not for use with routers and not suitable for masonry work. Specifications: • Dia Metric: 7.14 • Dia Imperial: 9/32 • Overall Length Metric: 111

Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are not for use with routers and not suitable for masonry work. Specifications: • Dia Metric: 7.9 • Dia Imperial: 5/16 • Overall Length Metric: 117

Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are not for use with routers and not suitable for masonry work. Specifications: • Dia Metric: 6.3 • Dia Imperial: 1/4 • Overall Length Metric: 88

Blades can be rotated by exchanging blades over. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 20 • Overall Length Metric: 60

Blades of cutters can be rotated through 180 degrees to give one new cutting edge. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 30 • Overall Length Metric: 70 • Bearing Dia Metric: 19 • Angle: 90

Blades of cutters can be rotated through 180 degrees to give one new cutting edge. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19 • Cut Length Metric: 30 • Overall Length Metric: 78 • Bearing Dia Metric: 19 • Angle: 90

Blades that can be rotated in 90 degree increments giving three extra new edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 12 • Overall Length Metric: 52 • Bearing Dia Metric: 19 • Angle: 90

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 40 • Overall Length Metric: 92 • Type or Grade: TCT

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 38 • Overall Length Metric: 92 • Type or Grade: TCT

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 92 • Type or Grade: TCT

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 25 • Overall Length Metric: 92 • Type or Grade: TCT

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 20 • Overall Length Metric: 92 • Type or Grade: TCT