Drill Bits

HSS Pro Drill long series drill bits have a body manufactured from high quality HSS steel and have a bright finish. The drill bits have precision ground cutting edges which enable fast drilling and ensure perfect finishing. They have a ground flute for maximum accuracy and fast chip removal. The universal 118 point shape makes the drill bits suitable for drilling a wide selection of materials. They are perfect for drilling low carbon steel, soft metals, wood and plastics. They are manufactured to DIN 340 standards and have a cylindrical shank.

Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 25.0mm.Total length: 300mm.Working length: 240mm.

The Wera 868/1 IMP DC Impaktor Square-Plus 25mm Bits ensure an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry. Particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. For best results, use with the IMPAKTOR Tri-Torsion bit holder. Suitable for DIN 3126-D 6.3, ISO 1173 bit holders.

The Faithfull Soft Grip Wood Chisels are ideal for the professional tradesman or keen DIY enthusiast. Each blade is manufactured from drop-forged chrome vanadium steel that is hardened and tempered to exacting standards to ensure that the cutting edge remains sharper for longer. The bevelled edge blade design makes these chisels ideal for cutting into tight corners and for use on fine work. The handles have an anti-slip, soft grip coating for added user comfort and are fitted with a steel striking cap that provides added protection when used with a mallet or an occasional hammer blow. A correctly sharpened wood chisel has a double angle profile. The blade is ground to an angle of 25 which increases …

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck. For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.

A 10 Piece Robust Line Metal Drill Bit Set manufactured from High Speed Steel Cobalt to DIN 338, 135. In diameters 1.0 - 2.0 - 3.0 - 4.0 - 5.0 - 6.0 - 7.0 - 8.0 - 9.0 - 10.0mm. - Suitable for alloyed and non-alloyed steel up to a tensile strength of 1000 N/mm, stainless steel V2A/V4A, cast iron, cast steel, acid and heat-resistant steels - Precision drill bits that are resistant to heat and wear

It is suitable for use with diamond drilling tools. The Standard for Universal Diamond Dry Core Cutter delivers reliable drilling in masonry. Its segments are laser-welded to ensure durability and enable dry masonry drilling for joint boxes, socket outlets, sanitary delivery pipes, etc. This Dry Core Cutter is intended for such building materials as limestone, brick and masonry.Diamond dry core cutter G 1/2"• Reliable Drilling in Masonry• Standard for Universal Diamond Dry Core Cutter delivers reliable drilling in masonry• Segments are laser-welded to ensure durabilitySpecifications:Diameter mm: 28Working length mm: 350Number of segments: 3Segment height mm: 7,0Materials:StoneMaterials …

Bosch SDS MAX masonry drill bits with Quadro-X drilling head with four cutter geometry for the toughest applications. Features and Benefits 4-cutter, vacuum brazing and hardening. Long lifetime/No jamming in rebar. Highly durable carbide. Good lifetime/wear resistance. Suitable for concrete and reinforced concrete and masonry. Can be used in all rotary hammers with SDS-max holder

It is compatible with an SDS plus chisel attachment or it can be used directly in SDS plus hammers with a rotation stop. The SDS plus Wood Chisel delivers fast chiselling in soft wood. It has been designed with angles for a perfect groove and quick results. The chisel is intended for use on general carpentry work in wood.Wood chiselSDS plus wood chisel delivers fast chiselling in soft wood• Fast Chiselling in Soft Wood• SDS plus Wood Chisel delivers fast chiselling in soft wood• Designed with angles for a perfect groove and quick resultsSpecifications:Total length mm: 175Chisel cutting edge mm: 20Materials:WoodMaterials in Detail:Hard/solid woodSoftwood

The super-strong body is extremely robust Precision-ground from solid metal with an oxide-coated flute for slicing through materials with reduced wear Active cutting and perfect centring due to pointed split-point tip. 1/4-inch hex-shank for universal use.Specifications:- Diameter mm: 2.0 / 3.0 / 4.0 / 5.0 / 6.0 / 7.0 / 8.0 / 10.0- Total length mm: 60 / 72 / 83 / 91 / 98 / 109 / 117 / 133- Set dimension(s) mm: 41.0 x 110.0 x 200

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

The Installation Drill Bit is very robust for formwork. Its drill bit and shank end are screw-connected, which ensures a low risk of breakage and improves smooth-running operations. Furthermore, its tapered flute, offset drill bit and shank ends prevent jamming even in moist wood, while maintaining enough power to cut through embedded nails. Equipped with an extra-long shank, the bit delivers versatile drilling in multilayer building materials or sandwich materials, e.g. for building trade (formwork) and for interior fitting work, plumbing, heating and electrical installation. It is suitable for use on formwork, boards, planks, beams, plasterboard, light building materials, insulations and metal,…

The Installation Drill Bit is very robust for formwork. Its drill bit and shank end are screw-connected, which ensures a low risk of breakage and improves smooth-running operations. Furthermore, its tapered flute, offset drill bit and shank ends prevent jamming even in moist wood, while maintaining enough power to cut through embedded nails. Equipped with an extra-long shank, the bit delivers versatile drilling in multilayer building materials or sandwich materials, e.g. for building trade (formwork) and for interior fitting work, plumbing, heating and electrical installation. It is suitable for use on formwork, boards, planks, beams, plasterboard, light building materials, insulations and metal,…

This drill bit has a hexagonal shank system and works with all drill drivers with a 13-mm chuck. The Auger Bit is ideal for fast drilling-accuracy when producing through-holes, pre-drilling for rafter nails and drilling deep dowel holes in wood. The heavy-duty self-feeding tip pulls the bit through completely, which allows for quick and effortless precision-drilling. Straight holes and a high chip removal rate and increased speed are made possible by the bit's optimised low-friction flute geometry with a solid centre. Its optimised scoring spur and precision-ground main cutting edge produce accurate holes. It is ideal for use in the ancillary building trades, for carpenters and roofers, and …

The Long HSS Twist Drill Bit Ground is for drilling deep holes through metal with maximum precision. Its extended length makes this long bit capable of drilling deeply. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. The Long HSS Twist Drill Bit Ground is manufactured to DIN 340. The drill bit is Type N (flute angle) with …

The Modern Construction Site Requires Working On Many Different Materials And You Never Know What You Will Need To Drill Next. Finding The Right Drill Bit Can Be Difficult And Time-Consuming – Unless You Have The Expert Multiconstruction Drill Bit.The Bosch Expert Cyl-9 Multiconstruction Cylindrical Drill Bit Is The One Drill Bit That Should Always Be In Your Toolbox: You´ll Never Get Stuck On A Job Or Waste Time Looking For The Right Bit.Features:- High Precision Drilling Multiple Materials- Accurate Drilling Is Easy With Bosch Centering Geometry.- Start Holes Accurately With A Specially-Designed Centering Tip.- Cylindrical Shank Compatible With Three-Jaw Drill Chucks.Specifications:- Diameter (D)…

Bosch Impact Control Screwdriver Bit Sets, 35-Piece. Number of bits: 35 pc(s), Material: Steel, Certification: CE. Shank size: 25.4 / 4 mm (1 / 4´´), Shank shape: Hexagonal, Case material: ABS