Drill Bits

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

Manufactured from good quality steel with sintered diamond segment. For cutting holes for pipe and conduit. Thread 1/2" BSP. Carton packed.

Expert Quality, manufactured from special air hardened chrome vanadium steel for long life. The cutting edges and tips are accurately ground, with specially tempered heads. Packed in plastic holder on display card.

The Makita B-49432 set contains a useful selection of HSS, masonry and brad point drill bits in a durable plastic storage case. Features & Benefits• HSS drill bits ideally suited to metal and also suitable for wood & plastic • Masonry drill bits for hammer drilling into brick & concrete • Brad point drill bits for wood • Round shank suitable for use with standard jawed drill chucks • Durable plastic storage caseContents• HSS-G Drill Bits: 4,5,6,7,8,10mm • Brad Point Wood Drill Bits: 4,5,6,7,8,10mm • Masonry Drill Bits: 4,5,6,7,8,10mm • Plastic Case

Suitable for cutting granite, marble, limestone, slate, hard bricks and other dense, non abrasive materials. Specifications • Diameter: 22mm • Overall Length: 300mm • Fitting: 1/2 BSPFeatures & Benefits• Fast cutting ability in granite, marble and most hard materials • Can be used with dust extraction • Suitable for granite, marble, limestone, slate, hard bricks, engineering bricks & dense materials • Features 5mm useable diamond segments brazed to a solid core

Suitable for cutting granite, marble, limestone, slate, hard bricks and other dense, non abrasive materials. Specifications • Diameter: 28mm • Overall Length: 300mm • Fitting: 1/2 BSPFeatures & Benefits• Fast cutting ability in granite, marble and most hard materials • Can be used with dust extraction • Suitable for granite, marble, limestone, slate, hard bricks, engineering bricks & dense materials • Features 5mm useable diamond segments brazed to a solid core

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

The XLR range of points and chisels features a shaft of shock resistant steel to prevent breakage with a wear resistant tip to maintain sharpness. Features & Benefits • For heavy duty chiselling, channelling and demolition tasks in concrete/rebar and hard stone • Fully hardened steel point/chisel face for high wear resistance and increased productivity • The special 'Stay Sharp' chisel tip ensures a long-lasting sharpness of the chisel and thus an extended durability • High durability shock resistant steel minimises breakage Specifications • Width: 50mm • Length: 400mm • Shank: SDS Max • Pack Quantity: 1

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

Milwaukee MX4 SDS Plus drill bits have a symmetrical 4 cutter geometry (4 x 90°) and are ideal for making perfect round holes when fitting anchors. The high volume flutes ensure efficient removal of dust and debris while drilling, and a centering tip enables quick and accurate starting. Features & Benefits • Symmetrical 4 cutter geometry • High volume flutes ensure efficient removal of dust and debris • Centering tip for easy spot drilling with pinpoint accuracy • Welded solid carbide tips on sizes 5mm - 10mm • Increased carbide results in higher durability • Four breaker points pulverize material for faster drilling • Enhanced rebar guards for improved …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

• HSS Nova 50 core bit with QuickIN holder• Industrial standard. Metric dimensions, cutting depth 50 mm.Specifications:Cutting depth: 50 mmBore Ø: 18 mm

Osborn Goldex 81505 series jobber drill bits. Suitable for drilling stainless steels and other difficult to cut materials. Features & Benefits • DIN 338 • HSS-E (High Speed Steel, 5% Cobalt) • 135° point angle • 33° helix angle Specifications • Diameter: 10.6mm • Length: 87mm • Quantity: 5 • Drill Body Tolerance: h8

Osborn Goldex 81505 series jobber drill bits. Suitable for drilling stainless steels and other difficult to cut materials. Features & Benefits • DIN 338 • HSS-E (High Speed Steel, 5% Cobalt) • 135° point angle • 33° helix angle Specifications • Diameter: 10.7mm • Length: 94mm • Quantity: 5 • Drill Body Tolerance: h8

Osborn Goldex 81505 series jobber drill bits. Suitable for drilling stainless steels and other difficult to cut materials. Features & Benefits • DIN 338 • HSS-E (High Speed Steel, 5% Cobalt) • 135° point angle • 33° helix angle Specifications • Diameter: 10.8mm • Length: 94mm • Quantity: 5 • Drill Body Tolerance: h8

Osborn Goldex 81505 series jobber drill bits. Suitable for drilling stainless steels and other difficult to cut materials. Features & Benefits • DIN 338 • HSS-E (High Speed Steel, 5% Cobalt) • 135° point angle • 33° helix angle Specifications • Diameter: 10.9mm • Length: 94mm • Quantity: 5 • Drill Body Tolerance: h8

Osborn Goldex 81505 series jobber drill bits. Suitable for drilling stainless steels and other difficult to cut materials. Features & Benefits • DIN 338 • HSS-E (High Speed Steel, 5% Cobalt) • 135° point angle • 33° helix angle Specifications • Diameter: 11mm • Length: 94mm • Quantity: 5 • Drill Body Tolerance: h8

Osborn Goldex 81504 series jobber drill bits.High Quaility HSS fully ground Titanium Coated Drill point for longer life. Suitable for drilling in steel, cast steel (alloyed and non alloyed), grey cast iron, graphite and malleable cast iron. Specifications • Standards: DIN 338 • Composition: High Speed Steel • Point Angle: 118° • Point Type & Helix Angle: N ~ 30° • Drill Body Tolerance: h8

Osborn Goldex 81504 series jobber drill bits.High Quaility HSS fully ground Titanium Coated Drill point for longer life. Suitable for drilling in steel, cast steel (alloyed and non alloyed), grey cast iron, graphite and malleable cast iron. Specifications • Standards: DIN 338 • Composition: High Speed Steel • Point Angle: 118° • Point Type & Helix Angle: N ~ 30° • Drill Body Tolerance: h8

Osborn Goldex 81504 series jobber drill bits.High Quaility HSS fully ground Titanium Coated Drill point for longer life. Suitable for drilling in steel, cast steel (alloyed and non alloyed), grey cast iron, graphite and malleable cast iron. Specifications • Standards: DIN 338 • Composition: High Speed Steel • Point Angle: 118° • Point Type & Helix Angle: N ~ 30° • Drill Body Tolerance: h8

Osborn Goldex 81504 series jobber drill bits.High Quaility HSS fully ground Titanium Coated Drill point for longer life. Suitable for drilling in steel, cast steel (alloyed and non alloyed), grey cast iron, graphite and malleable cast iron. Specifications • Standards: DIN 338 • Composition: High Speed Steel • Point Angle: 118° • Point Type & Helix Angle: N ~ 30° • Drill Body Tolerance: h8

Osborn Goldex 81504 series jobber drill bits.High Quaility HSS fully ground Titanium Coated Drill point for longer life. Suitable for drilling in steel, cast steel (alloyed and non alloyed), grey cast iron, graphite and malleable cast iron. Specifications • Standards: DIN 338 • Composition: High Speed Steel • Point Angle: 118° • Point Type & Helix Angle: N ~ 30° • Drill Body Tolerance: h8