UPS

Output: 3.3VDC @ 0-3A Rated Output Power: 9.9W Protections: Short circuit / Overload/ Over voltage/ Over temperature

EU PLUG.The EFFICIENT RT range are double Online UPS.high-density conversion, adapted to feed.a wide range of devices such as servers,.storage systems, VoIP telephone sets,.network systems and medical, as well as field.industrial.It is ideal for feeding and protecting animals.Blade Server systems with a high power factor.power.The height of only 2U makes the range.EFFICIENT RT can be perfectly integrated into.19´´ rack cabinets.ZGR has always been concerned with savings.energy and has introduced in all series of UPS.the ECO function that minimizes consumption during.normal operation and improve efficiency.

Warranty+ distributed service pack Takes your standard warranty to 36 months Advance parts replacement

CertaUPS C200 uninterruptible power supply (UPS) Line-Interactive 1.5 kVA 1050 W 6 AC outlet(s)

Salicru SNMP FOR SLC 10 CUBE INTERNAL USE.

EU PLUG.Multi Switch ATS guarantees power operating continuity.The usage of ATS guarantees higher reliability then a single UPS with a bypass.- Multi Switch ATS permits to power up to 8 x 10A IEC load or 1 x 16A IEC from 2 power supplies line (either from the grid or UPS).It is able to connect the loads to one of the 2 input lines and meanwhile to monitor the consumption.- Multi Switch ATS can switch-off each group of output power-plugs separately.- In case of load malfunctions (e.g.short-circuit) the Multi Switch ATS disconnects the plugs where the load is connected, avoiding to disconnect other loads.Operating principle:- Multi Switch ATS provides direct distribution of eight 10 A IEC consumers …

Line-interactive UPS with sine-wave output. Output power factor = 0.9. Permanent stabilisation.

The regulator monitors the exciter excitation current as a function of the alternator output voltage. Very simple in design,the alternator with shunt excitation has no sustaining short-circuit capacity. Voltage Regulation:around +/- 0.5; Voltage supply/sensing range 85 -139 V (50-60Hz) Rapid response time (500 ms) for a transient voltage variation amplitude of 20 Voltage setting P1; Stability setting P2. Initial potentiometer settings : 1) P1 potentiometer (AVR voltage adjustment): fully anti-clockwise. 2) Remote voltage adjustment potentiometer: centre position. Run the alternator at its rated speed. If the voltage does not increase, the magnetic circuit should be remagnetized (see section …

Specifications: - UPS topology : Line-Interactive- Output power capacity :1000 kVA- Output power : 1000W- Waveform : Pure sine- Input operation voltage (min): 160 V- Input operation voltage (max): 294 V- Input frequency: 47/70 Hz- Noise leve: l40 dB- Power protection features: OverdischargePorts & interfaces- AC outlet types: C13 coupler, C19 coupler- Power plug: C20 coupler- USB port: Yes- Serial interface: Yes- Serial interface type: RS-232- Serial ports quantity: 1Battery:- Automatic battery test: YesDesign:- Form factor: Rackmount/TowerDesign:- Rack capacity: 2U- LED indicators: Yes- Display: LCD- SafetyIEC/EN 62040-1, UL1778, CSA22.2- CertificationIEC/EN 62040-2, FCC B, CISPR22 B CB (TUV) …

The APC Smart-UPS SMC Series offers guaranteed battery backup and surge protection for entry-level servers small switches networking devices and point-of-sale (POS) equipment max. Output 1.500 VA / 900 Watts - Tower model Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs. Content of delivery: Smart UPS SMC User manual USB Cable Shutdown Software The APC Smart-UPS SMC Series offers guaranteed battery backup and surge protection for entry-level …

Detection and input: Voltage 120(95-132)/240(190-264) V AC Megnetic output: Voltage 207V AC Max Input 90V DC Current: Constant 4A, 10A in inconstant 10 secs Voltage regulation accuracy: Less than 1% System requirements: less than 80KW Model: SX460 Colour: black Material: plastic Package Contents: 1 x Voltage stabilization board Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.