Drill Bits

Bosch 2608833800 SDS Plus-5X Hammer Drill Bit 10mm x 200mm x 260mm The Bosch 2608833800 SDS Plus bits offer highly efficient drilling in reinforced concrete and masonry. They have a 4-flute design which provides fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. The centring tip prevents wandering and geometrical form prevents jamming. Features:
- SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete
- Geometrical form of the 4-cutter head prevents jamming and breakage for optimal results
- “Turn-angle” head and 4-flute design provide fast dust removal for increased drilling speeds and reduced wear
- Centring tip guid…

Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.

• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 120mm Working length. • Supplied in a plastic wallet.HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 120mm Working length. Supplied in a plastic wallet.• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 120mm Working length. • Supplied in a plastic wallet. • Model No. BSB16.0Technical Specification:Size: ø16 x 180mmDimensions: Length: 20mm x Height: 210mmWeight: 0.15KgWarranty: Consumable

Expert Quality, with combination type shank for power and hand tools on all wood types. Precision machined for perfect concentricity from medium carbon steel and fully hardened. Unique flute spiral has an accurately ground and honed cutting edge on its entire length. Spur tip ensures accurate and positive drilling starts. All sizes have a strong 6mm shank. Display packed.

With an innovative carbide tip design, Stanley SDS-PLUS masonry drill bits power through masonry, concrete, and more with high grade carbide tip that maximizes bit life. The unique flute design of this drill bit allows for efficient dust removal while drilling, resulting in cleaner holes and reduced clogging. This feature not only enhances productivity but also prolongs the lifespan of the drill bit. Featuring a carbide tip, the Stanley SDS Plus Masonry Drill Bit effortlessly penetrates tough surfaces with ease, delivering fast and accurate results every time. This precision drilling tool ensures minimal vibration, reducing user fatigue and ensuring optimal control during operation. Features …

Faithfull Combination Augers can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be used in timber, plywood, MDF and blockwood and can be resharpened using a hand file. Short series or stubby auger bits are for use in confined spaces, such as between joists. Overall Length 120mm.

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

Tile and Glass drillbit with special tip (TCT) for clean accurate holes in glass and ceramics.Size. 5mm.

SDS Drill Bit 12x90x160mmC.K SDS Concrete Drill Bit 12x90x160mm~ Tungsten carbide tipped with optimized geometry for drilling concrete and stone~ Vacuum brazed tips for durability~ Ground flutes designed for optimum debris removal~ SDS-plus shank~ Diameter: 12 mm~ Working length: 90 mm~ Total length: 160 mmTechnical DataDiameter: 12mmWorking length: 90mmOverall length: 160mmComponent Material:Tungsten tipTechnical Specification:CE Certified: NoConflict Materials Content : YesConflict material Country of Origin: GermanyConflict material Name of substance: TungstenREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger …

Milwaukee MX4 SDS Plus drill bits have a symmetrical 4 cutter geometry (4 x 90°) and are ideal for making perfect round holes when fitting anchors. The high volume flutes ensure efficient removal of dust and debris while drilling, and a centering tip enables quick and accurate starting. Features & Benefits • Symmetrical 4 cutter geometry • High volume flutes ensure efficient removal of dust and debris • Centering tip for easy spot drilling with pinpoint accuracy • Welded solid carbide tips on sizes 5mm - 10mm • Increased carbide results in higher durability • Four breaker points pulverize material for faster drilling • Enhanced rebar guards for improved …

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

Irwin Turbomax HSS Drill Bit (2). Size 9.0 x 125mm. Note: Image is for illustrative purposes only and may differ from the actual product

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60. Manufactured to BS 3066.

Bosch 2608584676 HSS-G Hole Saw Pilot Drill 6.35mm x 38mm x 80mm 1/4in Hex Shank The Bosch 2608584676 has a 1/4 Inch Hex Shank, a 6.35mm diameter and a working length of 38mm. The Pilot Drill Bit drills the pilot hole in order to guide the hole saw into position. Use this pilot bit when cutting holes through a wide variety of materials. It is suitable for use with all corded and cordless drill drivers. Features:
- The Pilot Drill Bit HSS G delivers more robustness and precision than its predecessor
- Pilot Drill Bit drills the pilot hole in order to guide the hole saw into position
- Pilot bit cuts holes through a wide variety of materials Specification:
- Diameter: 6.35mm
- Working …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

The Milwaukee Shockwave Multi-Material Drill Bits have been designed with a 2 cutter carbide tip to provide durability along with versatility for drilling into a wide range of tough materials including; Concrete, Bricks, Roof Tiles, Thin Metal, Ceramic, Tiles, Wood, PVC, Aluminum, Drywall and More. Equipped with a 1/4" hex shank, these multi-material drill bits are compatible with impacts, drill/drivers, and hammer drills. Milwaukee Shockwave Multi-Material Drill Bits provides the ideal all-in-one solution for the widest variety of materials, tools, and applications. Specifications • Cutting Width: 8mm • Length: 260mm • Pack Quantity: 1Features & Benefits• For use with Concrete,…

The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP850PRO Professional Jobber Drill Bit has the following specifications: Diameter: 8.5mm. Pack quantity: 1.Additional Information:• Tip Diameter: 8.5mm• Working Length: 72mm• Overall Length: 117mm• Pack Qty.: 1

A must for every Engineers toolbox! StepPower is the perfect tool for precise drilling with a cordless screwdriver or handheld drill without punching or pre-drilling. The innovative step geometry ensures that the material is gradually removed until the desired diameter is achieved. This makes for effortless drilling without exerting force and saves battery power. The stepped twist drill allows the drilling of virtually burr-free holes in all common materials such as hardwood, plastic or metal. The tool also easily drills composite materials. Suited for cordless drills.This makes StepPower an indispensable all-rounder for every workshop. Features & Benefits • 118° Point geometry with …

5pc Masonry drill bit set (4,5,6,8,10mm)
Content: 5pc Masonry drill bit set (4,5,6,8,10mm)
EAN: 3165140415569
2607019438

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Manufactured to DIN 8039. Zinc plated finish and packed individually. Size.10 mm x 200 mm.Additional Information:• Diameter: 10.0mm• Overall Length: 200mm• Pack Qty.: 1

With an innovative carbide tip design, Stanley SDS-PLUS masonry drill bits power through masonry, concrete, and more with high grade carbide tip that maximizes bit life. The unique flute design of this drill bit allows for efficient dust removal while drilling, resulting in cleaner holes and reduced clogging. This feature not only enhances productivity but also prolongs the lifespan of the drill bit. Featuring a carbide tip, the Stanley SDS Plus Masonry Drill Bit effortlessly penetrates tough surfaces with ease, delivering fast and accurate results every time. This precision drilling tool ensures minimal vibration, reducing user fatigue and ensuring optimal control during operation. Features …

Milwaukee HSS-G Thunderweb Drill Bit design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the Tunderweb core is thicker than that of a standard drill bit. Specifications • Cutting Width: 1.8mm • Length: 46mm • Pack Quantity: 10Features & Benefits• Parabolic web cross section: Large web thickness and strength built in • Thunderweb flute form ejects hot chips rapidly • Dissipates heat better increasing life time • Precision starting, drill bit won't walk on material surface • Polished finish reduces friction …

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…

The SDS plus-7X Drill Bit provides an outstanding lifetime when drilling in reinforced concrete. Its full-carbide 4-cutter head is composed of the highest-quality carbide, which fortifies the head and provides exceptional impact resistance. Its consistent distribution of drilling power guarantees there is no power loss, which increases the overall lifetime. Bosch´s unique diffusion welding technology (IDS) provides a strong bond between head and flute. Moreover, the 4-flute design with wide channels reduces wear on the bit by allowing for effective dust removal. This bit is intended for hammer drilling in masonry, concrete and reinforced concrete. To achieve accurate results, the visibility o…