Drill Bits

Faithfull Cobalt Quick-Change Impact Drill Bits feature a revolutionary tip design that is far superior to any other drill bit in the industry. These innovative drill bits have 7 cutting edges and 3 peaks that offer several distinct competitive advantages: - Super-accurate self-centring - you can make a hole in a round-pipe with one hand.- Speed - twice as fast as split point drill bits.- Tool lifetime - up to 10 times longer life in mild steel. Manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance. The cutting performance is fantastic, both on precision and degree of finish, leaving much less defects (burr) than other drill bits. Its protruding centre …

Expert Quality, manufactured from hardened and correctly tempered carbon steel. Suitable for use with hand and power drills. Packed one or two drill bits per hang up card.

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 2.5mm • Total Length: …

The Stanley metal drill bits are high-quality, made from high-speed steel for general purpose drilling into metal. Engineered tip is ideal for drilling on contact, improved accuracy and drilling curved surfaces. The round shank is suitable for use with corded and cordless hammer drills. With its CNC-ground flutes, the Stanley HSS-CNC Metal Drill Bits ensure efficient chip evacuation, reducing heat buildup during drilling for enhanced performance and longevity. Features & Benefits • For use with corded and cordless hammer drills • For fast accurate drilling in soft steel, sheet steel and non-ferrous metals • Computer numerically controlled process for greater accuracy and quality …

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size.8 mm x 120 mm.Additional Information:• Diameter: 8.0mm• Overall Length: 120mm• Pack Qty.: 1

Bosch 2608587573 SelfCut Flat Wood Drill Bit 16mmBlast through wood and light building materials with the Bosch 2608587573 SelfCut Flat Wood Drill Bit. This 16mm flat bit tackles various drilling tasks with exceptional speed and precision.
Features:
- Ideal for softwood, hardwood, and even light building materials like plasterboard
- The precision-ground tip and cutting edges ensure clean, dimensionally accurate holes, minimising rework and wasted materials
- Additionally, the innovative self-feeding threaded tip lets the bit pull itself through materials, achieving drilling speeds up to 5 times faster than standard spade bits
- The self-feeding design significantly reduces the force required …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The Faithfull Professional Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user. These drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.This Drill Bit has the following specification:Tip Diameter: 6mmWorking Length: 55mmOverall Length: 92mmAdditional Information:• Tip Diameter: …

Bosch 2608577168 HSS PointTeQ Twist Drill Bit 6.5mm The Bosch 2608577168 drill bit is suitable for fast drilling in metal thanks to its PointTeQ tip design. The self-centering tip prevents wandering, making quick and easy drilling starts possible. Increased drilling rate generates less heat and wear keeping the tips sharper for longer and ensuring continuous durability. Features:
- PointTeQ tip design allows for fast drilling in metal
- Self centring tip
- Made from high speed steel for long life Specification:
- Pack Qty: 1
- Size: 6.5mm

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size.7 mm x 150 mm.Additional Information:• Diameter: 7.0mm• Overall Length: 150mm• Pack Qty.: 1

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP100PRO Professional Jobber Drill Bits have the following specifications: Diameter: 1.0mm.Pack quantity: 3.Additional Information:• Tip Diameter: 1.0mm• Working Length: 12mm• Overall Length: 34mm• Pack Qty.: 3

Milwaukee HSS-G Thunderweb Drill Bit design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the Tunderweb core is thicker than that of a standard drill bit. Specifications • Cutting Width: 6.5mm • Length: 101mm • Pack Quantity: 1Features & Benefits• Parabolic web cross section: Large web thickness and strength built in • Thunderweb flute form ejects hot chips rapidly • Dissipates heat better increasing life time • Precision starting, drill bit won't walk on material surface • Polished finish reduces friction …

A long-standing product range in the Dormer catalogue, A100 jobber length drill bits are suitable use in the majority of general-purpose engineering applications, whether used in machines or handheld power tools. Features & Benefits • High Speed Steel • Steam Tempered • DIN 338 • 118° Point Angle

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø8 x 300mmDimensions: Length: 5mm x Height: 380mmWeight: 0.084KgWarranty: Consumable

This drill bit is compatible with a 1/4-inch hex-shank system for universal use with drill drivers, impact drivers and drill stands. The Impact Control HSS Twist Drill Bit offers highly robust drilling in metal, especially with impact drivers. Extremely strong body is extremely robust. The twist drill bit is precision-ground from solid metal and has an oxide-coated flute, giving it an excellent surface quality for slicing through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metals and plastics. Pack of 1 • Highly Robust with Impact Drivers • Impact Control HSS Twist Drill Bit …

Bosch 2608587568 SelfCut Flat Drill Bit with Hex Shank 8mm x 152mmThe Bosch 2608587568 is a Flat Wood Drill Bit with an 8mm head size. Designed for drilling soft and hardwood as well as light building materials such as plasterboard. They are manufactured from specially hardened steel with precision ground tips and cutting edges for dimensionally accurate holes and are capable of drilling up to 5x faster than standard spade drill bits.Features:
- Drill up to 5 times faster than standard spade drills
- Flat Wood drill bits suitable for Hard Wood, Soft Wood, Plasterboard/Drywall
- Innovative self-feeding threaded tip for fast and accurate drilling with little exertion of force
- The precision-ground …

A long-standing product range in the Dormer catalogue, A100 jobber length drill bits are suitable use in the majority of general-purpose engineering applications, whether used in machines or handheld power tools. Features & Benefits • High Speed Steel • Steam Tempered • DIN 338 • 118° Point Angle

The Milwaukee Hammer Drill Bits have been designed with a 2 cutter carbide tip to allow for drilling into concrete, brick, block and soft material for electrical installations, lighting fixtures and holders. Our Hammer Drill Bits also features a red flute for easy identification along with a wide flute design to remove dust faster, while also reducing heat build-up, resulting in more holes per charge. Specifications • Cutting Width: 4mm • Length: 90mm • Pack Quantity: 1Features & Benefits• Tungsten carbide tipped drill bit allow drilling into concrete, aerated concrete blocks, masonry and granite • Wide red flute for optimal material extraction and easy identifiable …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Bosch 2608596304 Brad Point Drill Bit For Wood 7mm x 109mm The Bosch 2608596304 drill bits are designed for precise drilling in soft and hard wood. They are extremely sharp with a brad point centring tip for exact positioning of the hole without tearing the wood. You can expect good material removal without clogging thanks to its two flutes. Features:
- Brad Point Drill Bit offers precise drilling in soft and hard wood
- Extremely sharp drill bit with centring tip allows for exact positioning of the hole
- High-quality shoulder cutters with precise edges that produce tear-free holes
- For exact results, two flutes prevent debris from clogging the hole and easily remove excess materials …