Bike Lights

The 2000 lumens make it anywhere in an ocean of light. Coupling incorporates both the handlebar or head, NG4 is your best friend when the sun ceases to shine. Specifications: - Aerospace Aluminum - Led SCCP 2000 Lumens (18 Watts) - Profiles. 100% = 2000 Lumen (18W), 30% = 700 Lumen (6W) Flashing (1 second) 100% -0% - 4 Battery Li-ion cells with short cable, 8000 mAh, 3.7 V - Activation by RRAR, or Rapid Response Activation Ring - Charging time: approx. 10-15 hours - Range: 100% 180min. * - Weight (with battery): 150 grams (360 grams) - Dimensions: 48mm (head) x 67mm (length) x 27mm (rear) - Color: black, blue head ring, color of light: 6500 Kelvin - Beam: Internal 15 °, 80 ° external - Operating Te…

5 super bright LED's50 lumensVisible up to 400mUp to 20 hours run timeFits 22.2mm-31.8mm tubing

2 white high power LEDs front light provides 150 lumens brightness 3 Modes: 6 hr (High) / 12 hr (Middle) / 50 hr (Blinking) Rubber strap provides bi-directional tool-free mounting and easy removal Can be used on aero / round handlebars or helmet. AA x 2 (included). Low battery indicator

Multiple modes: 5 lighting modes are available. Built-in front and rear helmet light mode: always on / slow flashing / rhythmic flashing / continuous flashing / fast flashing. It has 5 lighting modes and you can easily switch between them. In constant light mode, it can be used for 5.5 hours and 86 hours in fast flash mode. Integrated front and rear lights 360 warning Large flood lens, no warning of blind spots. The front and rear lights have independent switches that can be used independently. The front and rear lights can be up to 200 lumens, and the warning distance can be up to 1000 metres. Rechargeable via USB. Built-in capacity of 800 mAh. Provides 5-86 hours of operation. It can be

Charger / Rechargeable Battery

The Lezyne Ebike Rear Fender Stvzo Light uses a German StVZO optimized lens with a wide light spread.Two high output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included.Lezyne's e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the

As a new member of the X&O family, the X&O 50 was born out of a desire for more power from a small and compact headlight. This efficient yet ultra-compact headlamp incorporates the exclusive Reverse Beam Technology developed by Philips®, enhancing e-bike users´ visibility in any situation with its additional features.Features:- The X&O 50 headlight has a stylish and compact design- The optional reflector provides extra safety- The efficient Reverse Beam Technology (RBT©) of the X&O 50 produces a powerful beam of light- With this you have visibility up to 70 meters and you are seen up to a distance of 4000 meters- The X&O 50 also comes with a new high beam function, which can be turned on wit…

Features: * brand new and high quality *Made of high quality material, durable and practical to use *Original backlight of the brand bmc-tech for your e-bike *E-bike rear light for 24V/36V/48V E-bikes with 7 single LED s *Cable length is 120cm *Already installed: plug *The rear light can be connected either to the controller or directly to the battery. *Coverage: red: plus-pole of the rear lamp, blue: minus-pole of the rear lamp Specifications: *Material:ABS *Color:As Pictures Show *Size:Cable length is 120cm(Approx.) *Optional types:SM Connector,Waterproof Connector Package Contents: 1*Tail light Note: 1. The real color of the item may be slightly different from the pictures

Hi! Welcome to "Yousheng"Fashion! Quality is the first with best service,Customers all are our Best friends! Hope our products will satisfy you. Have a happy life! Yousheng Fashion Describe: Bike light is made of PC and ABS material, durable to use. Its directional flashing indicates that night travel safety factor is greatly enhanced. High quality remote control LED directional light is used for night use, such as cycling, baby carriage, jogging, walking, road emergency and camping. Installation steps 1. Take out the tail light and silicone strap 2. Put the silicone strap on the tail light 3. Attach the tail light to the bike 4. Take out the remote control, fixing bracket and

MEROCA WR25 Smart Bike Saddle Tail Light Brake Sensing Bicycle Rear Flashlight with 500mAh Battery 4 Light Modes

Got aerodynamic or ergonomic handlebars and want to mount your Exposure helmet light to your handlebar You need the Aero Bar Silicone Band Light Mount. Lightweight, secure and incredibly easy, the Exposure Aero Bar Silicone Band Light Mount is up to the task.Lightweight, secure and durable design is incredibly easy to use mount your light in secondsCompatible with Exposure Equinox, Diablo, Axis, Joystick, Sirius, Link & Link Plus lightsSilicone construction is incredibly grippy, preventing your light from slippingErgonomic and aerodynamic handlebars are great, they can improve speed and comfort, but they can also be a pain to mount lights to in winter. This is where the Exposure Aero Bar

The acid dynamo front light pro-d 50 cmpt for hub dynamo bikes boasts a handy auto-on function that automatically switches on your lights when the daylight fades. And the ´standlight´ function stays on when you stop for added safety and visibility in traffic. It also comes with a reflector that complies with german road traffic regulations (stvzo) and the fork bracket universal hpp for securely mounting the 50 lux light. Features: - Led front light for dynamo- Complies with German road traffic regulations (StVZO)- 50 lux- 80 cm power cable to dynamo- 40 cm power cable to rear light- Incl. Fork Bracket Universal HPP- Incl. K-reflector- Auto-on function- Protection class IPX5Specifications:- Ma…

The Exposure Support Cell 3.4A is designed to extend the burn time on your Exposure lights through Smart Port Technology. Ideal if you’re competing in an endurance race or are just greedy for power.Each Support Cell comes with a Support Cell Connector which allows you to charge the battery from your Smart Charger. The parts needed for mounting are also included.Exposure Support Cell 3.4A SpecificationsCable Length: 30cmWeight: 75gCompatability: Equinox, Diablo, Axis, Joystick, Sirius, HT1000

Supernova M99 Mini Pro-45 Headlight Max. 270 lux/1300 lumen, with low and high beam, with German quality mark. Self-service package, 12 V DC, for e-bikes up to 45 km/h, suitable for e-bikes/DC system. 16 W high beam (1300 lumen/270 lux), 8.6W low beam (700 lumen/250 lux), including magnetic push button for high beam (cable length 212 mm), with handlebar mount, 123 g.Specifications:- Type: Headlight- StVZO (German quality mark) in accordance with: Yes- Power supply: E-Bike battery- Light source: LED- Luminous intensity: 270 Lux- Brightness: 1300 Lumens- Features: Different light modes- Mounting: Mounting on the handlebar- Type of electrical voltage: Direct current (DC)- Electrical voltage: 12V- …

The Exposure Revo Dynamo pack is an all new concept for Exposure Lights; for the first time Exposure Lights is doing away with batteries and embracing the latest in dynamo developments and features the new super-efficient dynamo hubs which enable the Revo to be used both on and off road. This compact Dynamo powered Exposure light offers 800 lumens out put with the burn time only limited by the rider’s endurance and if you keep pedalling the light keeps shining bright. The light uses Stand Light Technology which means when you stop riding the light dims slightly but remains lit for 10 minutes and it ensures you will still be seen when stopped at junctions. The Exposure Revo Dynamo