Bike Lights

Bontrager Ion Comp R Front Light The Bontrager ion Comp R Front Light is capable and compact for all your road adventures. The 700-lumen beam is warm, wide and powerful for confident riding after dark, in any setting. Five focus, flash and range modes are versatile to suit your needs and match the conditions, whilst a Daytime Running Light mode aids visibility in adverse conditions or when days are dull - enabling you to be seen from up to two kilometres away. Charge this light with the included micro USB cable, and fix it to handlebars ranging from 22.2mm to 35mm in diameter thanks to the flexible Quick Connect+ mount. Includes Bontrager Ion Comp R light Adjustable Quick Connect+ Mount …

##Bontrager Ion 450 R Front Light Bontrager's Ion 450 R Front Light emits up to 450 lumens from a high-power CREE LED and offers five modes to suit varying conditions. The day flash mode keeps you safer during the day with the pulse cutting through distractions, and you'll be seen from up to 2km away. With a maximum run time of ten hours, you should always be able to make it home safely and charging takes a mere four hours so you'll be ready for your commute home, or the next morning's ride. ##Includes * Bontrager Ion 450 R Front Light * Quick Connect bracket * Micro USB charging cable

Bontrager Ion 100 R Front Light The Bontrager Ion 100 R Front Light is designed as an urban commuter light and for daytime visibility. With five modes and a maximum output of 100 lumens, this light is easy to pick out. Bontrager has strategically developed an interrupting flash pattern to draw the attention of other road users and the ambient light sensor helps to conserve battery when it is daytime. Burn times run from 1.5 to 16 hours depending on mode and with the included micro USB charging cable, you will be right back up to full charge in no time. Highlights Focused optics provide be seen safety with a broad but powerful light Integrated light sensor auto-adjusts brightness in flash …

Power Source: battery
Batteries Included: USB rechargeable
Modes: 5

Tiny but mighty! This compact light has 4 super bright LEDs to let traffic know where you are and reduce the chance of an accident. Built to last, this strobe is IPX4 which means that no matter the weather, you can rest assured that your light won’t fail you.
- Compact and lightweight clip-on lights
- 2 LEDs – 8 Max Lumens
- Replaceable Battery: 1 x 3V Lithium 2032 each light
- Burn Time: 18+ Hours (Steady On), 110 Hours (Strobe)
- Water Resistance: IPX4 – Weather resistant
- HyperBrite Mini 2-Pack Instructions – Download the PDF
- 65% ABS, 10% PC, 10% FR4, 5% Epoxy

Front Bike Light

Front Bike Light

Front Bike Light

The rebirth of an iconic bicycle light, the Frog Bike Light Set: bright, versatile & fun. A design that millions of riders around the world have come to love. Powerful enough for everyday commuting or used to complement an exisiting lighting set-up. Taking cues from Knog's more advanced lights, Frog is designed with Chip on Board LED technology, enabling a high intensity light that´s compact, low profile and packed with features.An Icon Re-Born. Brighter and better than before.COB LED Technology:- Efficient Chip on Board (COB) LEDs provide maximum brightness level for up to 90% of the battery burn time.Advanced Side Visibility:- COB technology allows the LEDs to be arranged on a curved board, …

The rebirth of an iconic bicycle light, the Frog Bike Light Set: bright, versatile & fun. A design that millions of riders around the world have come to love. Powerful enough for everyday commuting or used to complement an exisiting lighting set-up. Taking cues from Knog's more advanced lights, Frog is designed with Chip on Board LED technology, enabling a high intensity light that´s compact, low profile and packed with features.An Icon Re-Born. Brighter and better than before.COB LED Technology:- Efficient Chip on Board (COB) LEDs provide maximum brightness level for up to 90% of the battery burn time.Advanced Side Visibility:- COB technology allows the LEDs to be arranged on a curved board, …

Rear Bike Light / LED

Rear Bike Light / LED

Rear Bike Light / LED

Front Bike Light / LED

Front Bike Light / LED

Front Bike Light / LED

##Cateye Centre Fork Mount Bracket Utilising the Cateye Centre Fork Mount Bracket frees up valuable handlebar space as it lowers your front lights down to the fork crown nut level. The bracket is made of resilient polished steel and can be easily attached and removed using a five millimetre allen key and a ten millimetre spanner. Lowering the level of the light also means you are less likely to dazzle approaching cars, bike, or pedestrians especially if you are using the ultra-powerful Volt 1200. **Enables mounting of the following:** * Volt 300, 700 and 1200 * Nano Shot and Nano Shot Plus * Uno * Lido * Econom Force * HL-EL135 **Please note:** This bracket is mounted with the fork …

- Two high output LEDs provide 11 lumens.- StVZO optimized lens with wide light spread.- Automatic Deceleration Detection with 4 LED, 22 Lumen Alert Signaling Mode.- E-bike compatible 6 - 12v input, 1,2w - 2,4w alert mode.- Composite matrix fender mounting system.- IPX7 water resistant.- Stainless Allen key hardware included.- 130cm power cable included.Max.Lumens - Lux:n-a.max Runtime:n-a.Number of modes:n-a.Economy Mode:n-a.Enduro Mode:n-a.Blast Mode:n-a.Low Beam Mode:n-a.High Beam Mode:n-a.StVZO approved:ja.K-Number:n-a.Material:n-a.LED:n-a.waterproofness:IPX7.Connection port:DC.Charging time:n-a.Weight:n-a.Color:black.Lezyne Fender Alert STVZO.

Rear Bike Light / LED / 75 Lumen / Waterproof / Rechargeable Battery / Light Duration (High) 3 h

Front Bike Light

Exposure Lights QR Saddle Rail Bracket for Flare and TraceR Losing your mount does not mean you have to buy a whole new one, simply use the Exposure Lights QR Saddle Rail Bracket for Flare and TraceR. This is an especially useful mounting option if you have an aero seatpost. Attachment is via the band that will mount to any standard saddle rails to securely hold either your Exposure Flare or TraceR lights. Once installed, your lights can easily be removed and taken with you thanks to the quick release that is remarkably secure.

Exposure Lights Twin Helmet Mount Flash/Flare or Trace/Trace R Lights When you’re riding in the depths of winter and the roads are scattered with potholes, seeing what’s ahead of you is more important than ever. Luckily, Exposure Lights have created the perfect addition to any all-condition riders armoury of components with their Twin Helmet Mount. Designed to accommodate a combination of Exposure Tracer, TraceR, Flash and Flare lights (two at a time), you’ll be able to direct your front beam to wherever you need to see, whilst the rear light keeps you visible in low-light conditions. Please note, this helmet mount will fit most helmet types and is supplied with a short and long bolt to acc…

##Exposure Lights Helmet Mount Clip Bringing your Exposure Lights to the fore by making it mountable onto a range of Helmet Brackets including Go-Pro, Sony, and Exposure Lights brackets. The Adhesive Helmet Mount Clip makes for a modest addition but marks a big improvement to the versatility of your Exposure Light. Simply slotting into place, the Adhesive Helmet Mount Clip is easy to use, and a clever little clip. Please note: only the clip comes with this product (highlighted)

##Exposure Lights Adhesive Helmet Mount Many modern full face or aero style helmets lack the vents that are usually employed to mount helmet lights. The Exposure Lights Adhesive Helmet Mount uses a super sticky 3M pad to attach the mount to the helmet, and the locking mechanism allows the precise angle of the light to be adjusted easily, even with gloves on.