Car Subwoofers Teyes CC3L 4+32Gb Hyundai Tucson (2004-2009) 10  all car subwoofers →

100 watts RMS 300 Watts Maximum Impedance 4 Ohm 16.5 cm SPL 90db 1 W 140 mm, 42 mm/1 m frequency response: 35 Hz – 21 kHz EÖ: Woofer Tweeter et: 47 mm, 14 mm woofer tweeter

Flat Subwoofer / Nominal Load 130 Watt

Peak Power Handling: 350 Watts RMS Power Handling: 175 watts Frequency Response: 30 - 500Hz Sensitivity: 87.46dB

Protect your investment with the stylish and tough KTE-8G grille for 8" Alpine Type-R subwoofers. Brand: Alpine Model number: KTE-8G

30 cm marine subwoofer. load capacity: 200 watts rms / 400 watts max. Impedance: 4 + 4 Ohm. Fs 28.5 Hz, Qts 0.59, VAS 107.7 litres. Sound pressure: 89 dB. Xmax: 7 mm. Black grid. Polypropylene membrane with UV protection, black. Aramid fibre resistant to moisture, cracks, wear and tear. Can be used in closed, bass reflex or free air. Installation depth: 122 mm. Installation opening: 2 mm. 76 mm.

Car Subwoofer Speaker / Diameter 300 mm / Mounting Depth 115 mm / 300 watt / Nominal Load 200 Watt / 94 dB / Impedance 8 Ohm

BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s) HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an …

Diameter 250 mm / 10 Inch / 360 watt / Nominal Load 150 Watt / Impedance 4 Ohm

1000 Watts MAX / 500 watts RMS 42 Hz frequency response and 88dB sensitivity Aluminium Voice Coil Subwoofer with treated paper membrane and rubber base

Boss R935, 5-Channel Mosfet Power Amplifier, Riot Series + Subwoofer Remote Control, 4 x 80 Watts RMS + 1 x 150 watts @ 4 ohms stereo, 4x 150 Watt RMS + 1 x 300 Watts @ 2 ohm stereo

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Model Number : TS-A1672S Special Features : 6 COAXIAL 4-WAY. Audio Sensitivity : 91dB/W Signal To Noise Ratio : 91dB Frequency Range (Hz) : 35Hz~22KHz Out Power : 650W Material Type : Tweeters Item Size : 6 Inch Color Name : Black Voltage : 12V Speakers Types : Coaxial speakers Brand Name : REAKOSOUND Origin : Mainland China Certification : CE Item Type : Speakers Item Size : 6 Inch Frequency Range (Hz) : 35Hz-22KHz Audio Sensitivity : 91dB Speakers Types : Coaxial Speakers Voltage : 12V Car Make : Universal Out Power : Out Power Impedance : 4Ω Signal To Noise Ratio : 91dB Special Features : None Rated Power : 75W Install Diameter : 160mm Install Depth : 40mm Product Weight : 1150 G / 40.57

Spoked Subwoofer Grille designed for Kicker Comp,CompVT, CompVR, CompVX, and Solo Classic subwoofers series Simple installation Stylish black metallic finish Protects exposed Subwoofer from potential damage Dimensions: 10" (25cm)

Boss Audio Systems BX-10 Subwoofer Ripper Series 350 RMS, 700 Watt max. Factory packaging

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Material: Metal Size: Side length 5.5cm Diagonal screw center distance 6cm Diagonal outer diameter 6.7cm Interior opening 4.8cm Installation height 3.4cm Impedance : 4 ohms, Power : 14 watts Weight: About 85g Color: As shown in the figure Package includes: 1 Pcs Product features: 1. Neodymium magnetic 2 inch full frequency speaker using neodymium magnet, has a greater magnetic force, can provide a stronger driving force, so that the sound quality is clearer and richer. 2. This speaker uses a 2-inch full-frequency design, with a wide range of sound coverage and fine and full sound quality. No matter it is low or high, it can be performed vividly. 3. The shell of the horn has been carefully

Features: 10" 600W subwoofer, 360° to enhance the bass effect, nice sound quality, giving you a nice musical experience. Built-in amplifiers, reliable performance, can amplify the weak signal from the sound source and promote the sound of the speaker. High-quality aluminum alloy housing, fine workmanship, nice durability and shock resistance. Ultra-thin design, space-saving. Delivery includes installation wires, stable transmission and smooth connection, help you quickly complete the installation. Easy to install and use, compatible with 12.0V voltage for car, truck, RV, marine boat, etc. Specifications: Color: Black Material: Aluminum Alloy Power: 600W(Max.) Speaker Size: 10 Inch Impedance: …

Made for marine use: Life on the water can be hard on audio gear, with sun, spray, salt, and extreme temperatures, not to mention post-cruise washdowns and the occasional loose fish on the deck. This rugged JBL sub is ready for it all, with a one-piece polymer basket, marine-ready componentry, stainless steel mounting hardware, and a sealed, UV-resistant grille that will stand up to spray and sunlight for years to come. IPx5 Rated: Marine-grade materials & components to suit the demands of a harsh outdoor environment with an IPx5 marine rating Power handling: 200 watts RMS (600 watts peak power) / Sensitivity: 88 dB at 2.83 volts / Frequency response: 30-250 Hz / Impedance: 4 ohms Available …

100W 6.5 Inch High-power Subwoofer Speaker Home Passive Subwoofer Audio DIY Home Theater HiFi Fever Large Magnetic Steel Speaker Special reminder: This product has a built-in subwoofer crossover. Speaker model: LONVIN W1 Speaker series: high-fidelity HIFI crossover subwoofer series System form: phase-inverted Unit configuration: 6.5 inches heavy bass Frequency range: 30Hz-300Hz Distortion: 65Hz-20kHz

Boxed Subwoofer / Diameter 200 mm / 1000 watt / Nominal Load 700 Watt / Impedance 2 Ohm